3D Printer Filament Types: Materials Compared
PLA, PLA Plus and silk filament each suit a different print, and this guide compares them on diameter, tolerance, colors and stated print settings.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
OVERTURE Matte PLA Filament 1.75mm9.7/10View on Amazon - 2
ELEGOO PLA Plus 3D Printer Filament 250g Spool9.7/10View on Amazon - 3
ELEGOO PLA 3D Printer Filament Bundle 4KG9.6/10View on Amazon - 4
UGUESS PLA+ Silk 3D Printer Filament Bundle9.6/10View on Amazon
A replacement knob, a small run of organizers, a prototype for a client and a batch of small gifts all start the same way: a design on a screen and a spool of filament that can turn it into a part. 3d printer filament types are the choices behind that part, and this guide explains what PLA, PLA Plus and silk filament do.
LaserEngraveHQ earns a commission when you buy through links on product pages, at no extra cost to you. Read the affiliate disclosure.
This guide gives no price figures, because the listings state diameter, tolerance and colors, not prices. Treat any price seen online as a snapshot from a listing, not a benchmark.

OVERTURE Matte PLA Filament 1.75mm
A matte PLA filament in 1.75mm with a frosted finish, ±0.02mm accuracy, and a 1-year warranty.
Pros
- Frosted matte finish that conceals layer lines
- ±0.02mm accuracy on 1.75mm filament, per the listing
- Excellent bed adhesion and improved overhang performance
- Easy removal of rafts, brims and tree supports
Cons
- 1kg spool, smaller than the 4kg bundle here
- Matte Light Brown only in this listing
- 1-year shelf life is for unopened spools only
- No print temperature range is stated

ELEGOO PLA Plus 3D Printer Filament 250g Spool
An 8-color PLA Plus bundle of 250g spools with higher toughness than regular PLA and ±0.02mm accuracy.
Pros
- 8 colors in 250g spools, 2kg in total
- Higher toughness and impact strength than regular PLA, per the listing
- ±0.02mm accuracy on 1.75mm filament
- Neatly wound to reduce tangles, snap and breakage
Cons
- 30-day term, shorter than the 1-year warranty here
- 250g spools, smaller than the 1kg spools here
- No print temperature range is stated
- No shelf life is stated

ELEGOO PLA 3D Printer Filament Bundle 4KG
A 4kg PLA bundle in 4 colors, with 1kg spools at 1.75mm and ±0.02mm accuracy.
Pros
- 4kg across 4 spools of 1kg each
- ±0.02mm accuracy on 1.75mm filament
- Low warp and shrinkage, odorless during printing
- Dried before packaging and vacuum sealed against moisture
Cons
- No warranty term is stated
- No print temperature range is stated
- No shelf life is stated
- 4 colors only in this listing

UGUESS PLA+ Silk 3D Printer Filament Bundle
A 6-pack of tri-color silk PLA+ spools with gradient color, stated print settings, and ±0.03mm accuracy.
Pros
- Tri-color gradient with a silk-like sheen, per the listing
- Stated print settings: nozzle 200-240°C, plate 50-65°C, speed 50-200 mm/s
- 6 color combinations across 6 spools of 250g
- Precision winding with manual inspection, enlarged spool design
Cons
- ±0.03mm tolerance, looser than ±0.02mm here
- No warranty term is stated
- No shelf life is stated
3D Printer Filament Types: PLA, PLA Plus and Silk
The filaments in this guide are all PLA or PLA Plus at 1.75mm. Plain PLA suits everyday prints, PLA Plus suits tougher parts, and silk PLA Plus suits display pieces.
Diameter decides the fit: every listing here states 1.75mm, so the spool must match a printer that takes 1.75mm filament. Tolerance is the next check: the ELEGOO and OVERTURE listings state an accuracy of ±0.02mm, and the UGUESS listing states a tolerance of ±0.03mm. The 3D printers hub groups the machines that use these spools.
PLA: The Everyday Filament
Plain PLA is the everyday filament in this guide. The ELEGOO bundle lists a lower melting temperature with low warp and shrinkage, odorless during printing, and strong layer adhesion. The OVERTURE matte PLA (on Amazon) lists excellent bed adhesion and improved overhang performance, with easy removal of rafts, brims and tree supports.
PLA suits models, prototypes, miniatures and functional parts, per the OVERTURE listing. The matte finish suits prints where the surface matters: the OVERTURE listing states a frosted matte finish that conceals layer lines.
PLA Plus: Tougher Prints
PLA Plus is formulated for greater impact strength and durability compared with regular PLA, per the ELEGOO listing, and the UGUESS listing calls its PLA Plus modified and reinforced for toughness. That makes PLA Plus the pick for parts that take knocks: detailed models, figures and quick prototypes, and sturdy everyday-use objects.
The ELEGOO PLA Plus bundle (on Amazon) holds 8 colors in 250g spools, and the UGUESS silk bundle holds 6 tri-color combinations in 250g spools. Both are dried before packing and vacuum sealed.
Silk and Gradient Filament
The silk filament in this guide is PLA Plus with a sheen. The UGUESS listing describes tri-color gradient spools with seamless color transitions and a silk-like sheen, made by co-extrusion. The listing names miniatures and figurines, and display pieces where the finish shows. The stated print settings are nozzle 200-240°C, build plate 50-65°C and print speed 50-200 mm/s.
Gradient spools change color as the print grows. The UGUESS listing states an enlarged inner-diameter spool design with precision winding and manual inspection, to cut tangling, snapping and nozzle jamming.
Diameter and Tolerance
Every listing here states 1.75mm filament, so the spool must match a printer that takes 1.75mm.
3D Printer Filament for the Shop
The spools below cover the filament work in this guide.
Common Mistakes to Avoid
- Choosing a spool by color alone.
- Buying plain PLA Plus for a display piece that needs a sheen.
- Ignoring the stated print settings.
- Skipping the warranty term.
3D Printer Filament Types: The Short Version
- Name the part before buying: everyday prints, tough parts, or display pieces.
- Match the diameter to the printer: 1.75mm here.
- Compare the stated tolerance: ±0.02mm or ±0.03mm.
- Check the colors, the spool size and the warranty term.
FAQ: lasers and CNC
What is the difference between PLA and PLA Plus?
PLA Plus is formulated for greater impact strength and durability compared with regular PLA, per the ELEGOO listing, and the UGUESS listing describes its PLA Plus as modified and reinforced for toughness. Plain PLA suits everyday prints, while PLA Plus suits parts that take knocks.
What does ±0.02mm accuracy mean?
The listing states the filament diameter as 1.75mm with an accuracy of ±0.02mm, which means the stated diameter varies by no more than 0.02mm. The UGUESS listing states ±0.03mm on the same 1.75mm diameter.
How should filament be stored?
The ELEGOO listings state the filament is dried before packaging and vacuum sealed to protect it from moisture. The OVERTURE listing states a 1-year shelf life for unopened spools with proper storage.
Which filament suits miniatures?
The OVERTURE listing names miniatures among its uses, with a matte finish for fine surface detail. The UGUESS listing names miniatures and figurines for its gradient silk filament. The ELEGOO PLA Plus listing names detailed models and figures.
Related: the 3D printers hub, best PLA filament for 3D printers and ABS vs ASA filament. Also see the 3D printer resin vs filament cost guide and the best 3D printer filament for outdoor use.




