Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Uv Resistant Filament (2026): 5 Picks Compared

ASA filaments for outdoor parts, from a carbon fiber ASA with a 103°C heat deflection temperature to a 1 kg spool with a 1-year warranty, compared by UV resistance and print settings.

Best Uv Resistant Filament (2026): 5 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1OVERTURE ASA WhiteBest OverallOVERTURE ASA White9.6/10View on Amazon
  2. 2Polymaker ASA-CF08Best Carbon Fiber ASAPolymaker ASA-CF089.6/10View on Amazon
  3. 3Polymaker ASA OrangeBest 1KG ASAPolymaker ASA Orange9.6/10View on Amazon
  4. 4SUNLU ASA BlackBest Print SettingsSUNLU ASA Black9.6/10View on Amazon

A part left outside lives a hard life: sun fades it, rain soaks it, heat warps it and cold makes it brittle. The best uv resistant filament is the one whose listing states UV and weather resistance, a heat limit in degrees and print settings to match, so this guide compares the ASA filaments by what each listing states.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall OVERTURE ASA White: UV and weather resistant ASA with heat resistance up to 96°C, a 1-year warranty and vacuum-sealed packaging. Check price on Amazon
  • Best Carbon Fiber ASA Polymaker ASA-CF08: 8 wt% carbon fiber ASA with a heat deflection temperature of 103°C and stated tensile and bending strength. Check price on Amazon
  • Best 1KG ASA Polymaker ASA Orange: UV and weather resistant ASA in a 1 kg spool, rated to 100°C with stated nozzle, bed and speed settings. Check price on Amazon
  • Best Print Settings SUNLU ASA Black: 1 kg ASA spool with nozzle and bed ranges, a speed range and dimensional accuracy of +/- 0.02mm. Check price on Amazon

Machines on the list

OVERTURE ASA Filament 1.75mm

OVERTURE ASA Filament 1.75mm

OVERTURE9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A UV and weather resistant ASA filament in 1.75mm on a 1 kg cardboard spool, with heat resistance up to 96°C and a 1-year warranty.

Pros

  • UV and weather resistant, with excellent protection against UV rays
  • Heat resistance up to 96°C
  • 1-year warranty stated in the listing
  • Dimensional accuracy of +/- 0.02mm

Cons

  • Lowest heat resistance figure here, at 96°C
  • No nozzle or bed temperature is stated
  • No stated print speed
  • Listed weight of 2.9 lb is the heaviest here
Polymaker ASA Filament 1.75mm Orange 1KG

Polymaker ASA Filament 1.75mm Orange 1KG

Polymaker9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A UV and weather resistant ASA filament in 1.75mm Orange on a 1 kg spool, rated to 100°C, with stated nozzle, bed and speed settings.

Pros

  • UV-resistant and less prone to environmental stress cracking
  • Withstands temperatures up to 100°C (212°F)
  • Nozzle 250°C, bed 90°C and speed 50mm/s stated
  • Strong layer adhesion for functional parts

Cons

  • Lifetime technical support is stated, but no warranty term is given
  • Large parts need an enclosed printer to prevent warping
  • No stated drying guidance
  • No stated tensile or bending strength figures
Polymaker Fiberon ASA-CF08 Carbon Fiber ASA

Polymaker Fiberon ASA-CF08 Carbon Fiber ASA

Polymaker9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8 wt% carbon fiber ASA filament in 1.75mm Black on a 0.5 kg spool, with a heat deflection temperature of 103°C and stated tensile, bending and modulus figures.

Pros

  • 43.5 MPa tensile strength and 69.1 MPa bending strength stated
  • Heat deflection temperature of 103°C at 0.45 MPa
  • 8 wt% carbon fiber for rigidity and dimensional stability
  • UV and weather resistance for outdoor housings and fixtures

Cons

  • 0.5 kg spool, the smallest here
  • Filament may snap if bent tightly; keep the bending diameter above 60 mm
  • Needs a wear-resistant nozzle and an enclosed printer
  • No warranty term is stated
SUNLU 3D Printer ASA Filament 1.75mm,1KG(Black)

SUNLU 3D Printer ASA Filament 1.75mm,1KG(Black)

SUNLU9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A UV, rain and heat resistant ASA filament in 1.75mm Black on a 1 kg spool, with dimensional accuracy of +/- 0.02mm and stated nozzle, bed and speed ranges.

Pros

  • UV, rain and heat resistant for outdoor functional mechanical parts
  • Nozzle 230-260°C, bed 80-120°C and speed 50-100mm/s stated
  • Dimensional accuracy of +/- 0.02mm
  • Vacuum packaging keeps the filament moisture-free

Cons

  • No heat resistance figure in degrees is stated
  • No warranty term is stated
  • No stated tensile or bending strength figures
  • No stated drying temperature or time
ELEGOO ASA 3D Printer Filament 1.75mm Deep Black

ELEGOO ASA 3D Printer Filament 1.75mm Deep Black

ELEGOO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A UV and weather resistant ASA filament in 1.75mm Deep Black on a 1 kg spool, with a heat deflection temperature up to 99°C and vacuum-sealed packaging.

Pros

  • UV and weather resistant for prolonged sunlight, rain and harsh outdoor conditions
  • Heat deflection temperature up to 99°C / 210°F
  • Vacuum-sealed with a desiccant to prevent moisture absorption
  • Strong interlayer adhesion with minimal warping on enclosed printers

Cons

  • No nozzle or bed temperature is stated
  • No warranty term is stated
  • No stated tensile or bending strength figures
  • No stated print speed

Other machines to compare

Specs compared

Filament HQ Score Material Spool Heat resistance Print settings
OVERTURE ASA White 9.6/10 ASA, 1.75mm 1 kg Up to 96°C Not stated
Polymaker ASA Orange 9.6/10 ASA, 1.75mm 1 kg Up to 100°C Nozzle 250°C, bed 90°C, 50mm/s
Polymaker ASA-CF08 9.6/10 ASA + 8 wt% carbon fiber, 1.75mm 0.5 kg HDT 103°C at 0.45 MPa Nozzle 260–280°C, bed 90–100°C
SUNLU ASA Black 9.6/10 ASA, 1.75mm 1 kg Not stated Nozzle 230-260°C, bed 80-120°C, 50-100mm/s
ELEGOO ASA Black 9.6/10 ASA, 1.75mm 1 kg HDT up to 99°C Not stated

These numbers come straight from each maker’s listing and are rated, not measured by us (3 November 2026).

How the filaments were scored

Each filament is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing, and only the Overture listing states a warranty term, so warranty adds nothing for the other picks.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
OVERTURE ASA White 9.6 28 20 20 n/a 2
Polymaker ASA Orange 9.6 30 21 21 n/a 0
Polymaker ASA-CF08 9.6 33 22 16 n/a 0
SUNLU ASA Black 9.6 28 21 21 n/a 0
ELEGOO ASA Black 9.6 29 20 20 n/a 0

Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.

What makes the best uv resistant filament

Start with ASA, not PLA

Every filament here is ASA, and every listing names UV and weather resistance. ASA resists UV exposure and changing weather, per the Polymaker listing, and the ELEGOO listing says its ASA endures prolonged sunlight, rain and harsh outdoor conditions without fading, yellowing or a decline in mechanical performance. PLA and ABS filaments do not carry the same UV claim in these listings, so ASA is the starting point for outdoor parts.

Check the heat limit in degrees

Heat limits here are stated in degrees: the Fiberon ASA-CF08 lists a heat deflection temperature of 103°C at 0.45 MPa, the Polymaker ASA withstands up to 100°C, the ELEGOO ASA is listed up to 99°C, and the Overture ASA is listed up to 96°C. The SUNLU listing states no heat figure in degrees, only that the filament is heat resistant. Compare the stated figures, not the adjectives.

Match the print settings

Nozzle and bed temperatures differ by filament: the Fiberon ASA-CF08 prints at 260–280°C with a 90–100°C build plate and the cooling fan off, the Polymaker ASA at 250°C with a 90°C bed, and the SUNLU ASA at 230-260°C with an 80-120°C bed. The ELEGOO and Overture listings state no print temperatures. An enclosed printer is recommended for the Fiberon ASA-CF08 and for large Polymaker ASA parts, and the ELEGOO listing calls for enclosed printers.

Dry storage matters

ASA absorbs moisture, and the listings give the routine: store and print the Fiberon ASA-CF08 below 20% relative humidity and dry it at 90°C for 6 hours if it has absorbed moisture. The ELEGOO, SUNLU and Overture spools arrive vacuum-sealed, and the Overture spool carries a 1-year shelf life unopened with proper storage. Keep the spool dry and the prints stay consistent.

Project Match

Pair the project with the filament by part and setting:

  • Outdoor housings and fixtures: Polymaker Fiberon ASA-CF08, with 8 wt% carbon fiber and a 103°C heat deflection temperature.
  • Outdoor functional parts on a 1 kg spool: Polymaker ASA Orange, rated to 100°C with stated nozzle, bed and speed settings.
  • Parts that need a stated warranty: Overture ASA White, with a 1-year warranty and a 1-year shelf life unopened.
  • Wide print ranges for tuning: SUNLU ASA Black, with nozzle, bed and speed ranges stated.
  • Vacuum-sealed ASA for outdoor equipment: ELEGOO ASA Black, with a heat deflection temperature up to 99°C.

FAQ: lasers and CNC

What filament is best for outdoor parts?

ASA, per these listings: every filament here is an ASA that states UV and weather resistance, for outdoor housings, fixtures, brackets and functional parts. The Fiberon ASA-CF08 adds carbon fiber for rigidity, and the Overture ASA adds a stated warranty.

What nozzle and bed temperatures does ASA need?

It depends on the filament: the Fiberon ASA-CF08 needs 260–280°C at the nozzle and 90–100°C at the bed, the Polymaker ASA needs 250°C and 90°C, and the SUNLU ASA needs 230-260°C and 80-120°C. The ELEGOO and Overture listings state no temperatures.

Do I need an enclosed printer for ASA?

The listings say yes: an enclosed printer is recommended for the Fiberon ASA-CF08 to reduce rapid cooling and cracking, for large Polymaker ASA parts to prevent warping, and the ELEGOO listing calls for enclosed printers. Print in a well-ventilated area, per the Fiberon listing.

How should I store ASA filament?

Keep it dry: store and print the Fiberon ASA-CF08 below 20% relative humidity and dry it at 90°C for 6 hours if it has absorbed moisture. The ELEGOO, SUNLU and Overture spools arrive vacuum-sealed, and the Overture spool has a 1-year shelf life unopened with proper storage.

Related: best 3D printer filament for outdoor use, best PETG filament black, 3D printer filament types, how to dry filament and the 3D printers hub. Also see best large filament dryer.

More buying guides

3D Printers ·

Best Heat Resistant 3D Printer Filament (2026)

Five heat resistant filaments for functional parts, from PA6 carbon fiber nylon rated to 209°C to easy-printing HT-PLA, compared by heat resistance and print…