Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best ABS Filament Black Under $25 (2026)

Five black ABS filaments compared by diameter, accuracy, print temperatures, spool weight and enclosure needs, from what each listing states.

Best ABS Filament Black Under $25 (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Polymaker ABS ProBest OverallPolymaker ABS Pro9.7/10View on Amazon
  2. 2Creality 3D-ABS-BKBest Stated AccuracyCreality 3D-ABS-BK9.6/10View on Amazon
  3. 3Creality ABS BlackBest Temperatures StatedCreality ABS Black9.6/10View on Amazon

A functional part needs more than a pretty print: a bracket that holds its shape under heat, a housing that survives a warm enclosure, a prototype that takes a screw without cracking. Black ABS is the filament for those parts, and this guide to the best ABS filament black under 25 compares black spools by the diameter, accuracy, temperatures and enclosure needs each listing states.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Polymaker ABS Pro: Engineering-grade ABS with print speeds up to 250 mm/s and a bed preheat of 100 to 110 degrees C for 10 minutes. Check price on Amazon
  • Best Stated Accuracy Creality 3D-ABS-BK: 1.75 mm filament with a stated accuracy of plus or minus 0.02 mm in the title, and nozzle and bed temperatures stated. Check price on Amazon
  • Best Temperatures Stated Creality ABS Black: Nozzle 220 to 260 degrees C and bed 90 to 110 degrees C stated, with a fully enclosed printer recommended. Check price on Amazon

Machines on the list

Polymaker ABS Pro Filament Black 1KG 1.75mm

Polymaker ABS Pro Filament Black 1KG 1.75mm

Polymaker9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An engineering-grade black ABS on a 1 kg spool at 1.75 mm, built for heat resistance and dimensional stability, with print speeds up to 250 mm/s.

Pros

  • Print speeds up to 250 mm/s, the only speed stated here
  • Bed preheat guidance stated: 100 to 110 degrees C for 10 minutes
  • Engineered for creep resistance and dimensional stability under load and heat
  • Designed for enclosed and passively heated printers

Cons

  • No nozzle temperature stated in the listing
  • No dimensional accuracy figure stated
  • No warranty term stated in the listing
  • Built for enclosed printers, so open-frame printers are a poor match, per the listing
Creality 3D Printer Filament ABS Black 1KG

Creality 3D Printer Filament ABS Black 1KG

Creality9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A black ABS spool of 1 kg at 1.75 mm with nozzle and bed temperatures stated, a stated accuracy in the title, and a fully enclosed printer recommended.

Pros

  • Nozzle 220 to 260 degrees C and bed 90 to 110 degrees C stated
  • Accuracy of plus or minus 0.02 mm stated in the title
  • Fully enclosed printer or open printer with enclosure recommended
  • Technical team replies within 24 hours, per the listing

Cons

  • Bullets state accuracy of plus or minus 0.03 mm, against plus or minus 0.02 mm in the title
  • No warranty term stated in the listing
  • No print speed stated in the listing
Creality 3D Printer Filament ABS Black 1KG

Creality 3D Printer Filament ABS Black 1KG

Creality9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A black ABS spool of 1 kg at 1.75 mm with the same stated temperatures and accuracy as the other Creality spool, and a part number of 1 in the spec table.

Pros

  • Nozzle 220 to 260 degrees C and bed 90 to 110 degrees C stated
  • Accuracy of plus or minus 0.02 mm stated in the title
  • Fully enclosed printer or open printer with enclosure recommended
  • Technical team replies within 24 hours, per the listing

Cons

  • Bullets state accuracy of plus or minus 0.03 mm, against plus or minus 0.02 mm in the title
  • No warranty term or print speed stated in the listing
Polymaker ABS Filament Black 1KG 1.75mm

Polymaker ABS Filament Black 1KG 1.75mm

Polymaker9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A Black ABS spool with a stated Vicat softening temperature of 104°C, low odor resin and stated nozzle and bed settings.

Pros

  • Vicat softening temperature of 104°C for heat-resistant functional prints
  • Low odor resin with lower volatile content than traditional ABS resins
  • Suited to functional prototypes, mechanical parts and robotics
  • Vacuum sealed with desiccant, plus a stated drying routine at 70°C for 6 hours

Cons

  • No warranty term is stated in the listing
  • An enclosed printing chamber is recommended
  • Only Black is offered in this listing
  • No print speed range is stated
ELEGOO ABS 3D Printer Filament 1.75mm Black 1KG

ELEGOO ABS 3D Printer Filament 1.75mm Black 1KG

ELEGOO9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1.75mm black ABS spool with strong layer adhesion, heat resistance up to 85°C and water resistance, built for enclosed FDM printers.

Pros

  • Strong layer adhesion for functional parts
  • Heat resistance up to 85°C, with water resistance
  • Less-tangle winding and consistent feeding from a 1.75mm high-precision diameter
  • Vacuum sealed to prevent moisture before use

Cons

  • An enclosed printer is required, per the listing
  • No warranty term in the listing
  • No diameter accuracy figure is stated, only a 1.75mm diameter
  • The listing title spells the spool as 'spooll'

Other machines to compare

Specs compared

Model HQ Score Diameter Spool Accuracy Nozzle temp Bed temp Warranty
Polymaker ABS Pro 9.7/10 1.75 mm 1 kg Not stated Not stated 100-110°C preheat Not stated
Creality 3D-ABS-BK 9.6/10 1.75 mm 1 kg +/-0.02 mm title, +/-0.03 mm bullets 220-260°C 90-110°C Not stated
Creality ABS Black 9.6/10 1.75 mm 1 kg +/-0.02 mm title, +/-0.03 mm bullets 220-260°C 90-110°C Not stated
ELEGOO ABS Black 9.4/10 1.75 mm 1 kg Not stated Not stated Not stated Not stated
Polymaker ABS Black 9.6/10 1.75 mm 1 kg +/-0.03 mm Not stated Not stated Not stated

These numbers come straight from each maker’s listing and are rated, not measured by us (11 November 2026). Where a listing contradicts itself, both figures are shown.

What the ABS filament listings tell you

Five listings were read for this guide. Two are title-only listings with no bullets or spec table, so their cards stay short. The two Creality listings share the same bullets word for word, and both give two different accuracy figures and two different spool weights. Only one listing states a print speed, and none states a warranty term.

Buying guide: best ABS filament black under 25

Diameter and accuracy

Every spool here is 1.75 mm black ABS on a 1 kg spool. Accuracy is where the listings differ: the Creality title states plus or minus 0.02 mm while its bullets state plus or minus 0.03 mm, and the Polymaker ABS Black title states plus or minus 0.03 mm. The Polymaker ABS Pro and the ELEGOO spool state no accuracy figure at all.

Print temperatures

The Creality listings state a nozzle temperature of 220 to 260 degrees C, or 428 to 500 degrees F, and a bed temperature of 90 to 110 degrees C, or 194 to 230 degrees F. The Polymaker ABS Pro states a bed preheat of 100 to 110 degrees C for 10 minutes to warm the chamber and help first-layer adhesion, and says to turn off the cooling fan when layer or bed adhesion suffers. Neither title-only listing states a temperature.

Enclosure

ABS wants an enclosed printer. The Creality listings recommend a fully enclosed printer or an open printer with an enclosure, and say an enclosure will greatly improve the success rate of printing. The Polymaker ABS Pro is designed for enclosed and passively heated printers with a stable print window.

Speed

Only the Polymaker ABS Pro states a print speed: up to 250 mm/s while maintaining strong mechanical properties. The other listings state no speed, so speed is a point of difference only for the Polymaker Pro.

Spool size and weight

All five spools are 1 kg. The Polymaker ABS Pro spec table states 2.2 lb, while the Creality listings disagree with themselves: the bullets state 2.2 lb per spool and the spec tables state 2.0 lb. The two title-only listings state no spool weight beyond the 1 kg in the title, except the ELEGOO title, which gives 2.2 lb in parentheses.

ABS printing safety

ABS prints best in an enclosed printer, and the Creality listings recommend a fully enclosed printer or an open printer with an enclosure. Keep the print area ventilated and follow the printer maker’s guidance for ABS. See best 3D printer enclosure for Ender 3 for enclosure options.

Project Match

Pair the spool with the work, using only what the listings state about materials and uses:

  • Printer parts, brackets, housings and fixtures: Polymaker ABS Pro, named for exactly those uses at elevated temperatures.
  • General FDM printing: the Creality spools and the Polymaker ABS Black, all named for most FDM printers.
  • High-speed printing: Polymaker ABS Pro, the only listing to state a speed, up to 250 mm/s.
  • Enclosed printers: Polymaker ABS Pro and both Creality spools, which call for an enclosed printer.
  • Heat resistant parts: ELEGOO ABS Black and Polymaker ABS Black, named heat resistant in their titles; the Creality listings name no project type, so their match is Not stated.

How the scores add up

Each filament is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. For ABS filament, performance points come from the stated print speed, temperatures and accuracy, build points from the stated diameter control and spool winding, and warranty points only from a stated term. None of the listings states a safety certification, so all score zero on safety.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Polymaker ABS Pro 9.7 32 22 21 n/a 0
Creality 3D-ABS-BK 9.6 29 21 21 n/a 0
Creality ABS Black 9.6 29 20 20 n/a 0

Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.

FAQ: lasers and CNC

What temperature should I print black ABS at?

The Creality listings state a nozzle temperature of 220 to 260 degrees C and a bed temperature of 90 to 110 degrees C. The Polymaker ABS Pro states a bed preheat of 100 to 110 degrees C for 10 minutes.

Do I need an enclosure for ABS?

The Creality listings recommend a fully enclosed printer or an open printer with an enclosure, and say an enclosure will greatly improve the success rate of printing. The Polymaker ABS Pro is designed for enclosed and passively heated printers.

What diameter is ABS filament?

All five spools here are 1.75 mm. Check the diameter your printer takes before ordering, since the listings state 1.75 mm throughout.

How accurate is the filament diameter?

The Creality title states plus or minus 0.02 mm while its bullets state plus or minus 0.03 mm. The Polymaker ABS Black title states plus or minus 0.03 mm, and the Polymaker ABS Pro and ELEGOO listings state no accuracy figure.

How fast can I print ABS?

The Polymaker ABS Pro states print speeds up to 250 mm/s. The other listings state no speed, so no comparison on speed is possible for them.

Related: best ABS filament for 3D printing, best ABS filament black, best heat resistant 3D printer filament, 3D printer filament types, PLA vs ABS filament, how to dry filament and the 3D printers hub.

More buying guides