Best Black Glitter Filament (2026): 5 Sparkling Picks
5 black glitter PLA filaments for FDM printers, compared by tolerance, glitter flow, print settings, storage and warranty, with scores from the listings.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSUNLU Shiny Sparkle9.7/10View on Amazon - 2
Best Color ShiftSUNLU Galaxy PLA9.6/10View on Amazon - 3
Best for GiftsELEGOO Sparkle Black9.6/10View on Amazon - 4
Best ExtrasZIRO Diamond Black9.6/10View on Amazon
A plain black print can look flat on a shelf, while a black print with glitter catches the light from every angle. Makers who sell signs, decor, jewelry and cosplay accessories want that sparkle without clogged nozzles or rough layers, and the best black glitter filament is the spool that pairs fine glitter with a tight tolerance and clear settings. This guide compares sparkling black PLA filaments by tolerance, glitter flow, settings, storage and warranty, scored from the listings.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall SUNLU Shiny Sparkle: +/-0.02mm tolerance, glitter that flows through 0.4mm nozzles, and a 1 year warranty. Check price on Amazon
- Best Color Shift SUNLU Galaxy PLA: Color-changing pearlescent powder with a starry effect, printed at 200-230℃ with a 50-250mm/s speed range. Check price on Amazon
- Best for Gifts ELEGOO Sparkle Black: +/-0.02mm tolerance and a twinkling finish for artistic designs, decorations and gift items. Check price on Amazon
- Best Extras ZIRO Diamond Black: Ships with a 5M cleaning filament and a 5M sample, with settings stated for nozzle, bed and speed. Check price on Amazon
Machines on the list

SUNLU Shiny Sparkle PLA Filament 1.75mm
A twinkling black PLA filament at 1.75mm with a +/-0.02mm tolerance, glitter particles small enough for 0.4mm nozzles, and a 1 year warranty.
Pros
- +/-0.02mm tolerance with CCD diameter measuring
- Glitter flows smoothly through 0.4mm nozzles
- Dried for 24 hours, then vacuum-sealed with desiccant
- 1 year warranty stated in the spec table
Cons
- No nozzle, bed or speed settings are stated
- No spool dimensions are stated
- No print speed range is stated
- Low shrinkage is stated, but no shrinkage figure is stated

SUNLU Galaxy PLA 3D Printer Filament, 1KG Spool
A galaxy PLA filament at 1.75mm with color-changing pearlescent powder, a +/-0.02mm tolerance, and stated settings for nozzle, bed and speed.
Pros
- Color-changing pearlescent powder shifts color with light and angle
- Pearlescent powder less than 200µm for smooth extrusion
- Full settings stated: nozzle 200-230℃, bed 50-70℃, speed 50-250mm/s
- Hides layer lines for a smoother, more uniform surface
Cons
- No warranty term is stated
- No minimum nozzle size is stated
- No cleaning filament or sample is included
- No drying time is stated

ELEGOO PLA 3D Printer Filament 1.75mm Sparkle
A sparkle black PLA filament at 1.75mm with a +/-0.02mm tolerance, a twinkling glitter finish, and a stated minimum nozzle size of 0.4 mm.
Pros
- +/-0.02mm tolerance for consistent extrusion
- Glitter twinkling finish for artistic designs, decorations and gift items
- Vacuum-sealed spool to prevent moisture absorption
- Nozzle no smaller than 0.4 mm stated
Cons
- No warranty term is stated
- No nozzle, bed or speed settings are stated
- No spool dimensions are stated
- No drying time is stated

ZIRO Diamond Series Filament
A diamond series PLA filament at 1.75mm with denser glitter powder, stated settings for nozzle, bed and speed, and a 5M cleaning filament plus a 5M sample in the box.
Pros
- Full settings stated: nozzle 190-220˚C, bed 50-60˚C, speed 30-90 mm/s
- 5M cleaning filament and a 5M random filament sample included
- Free reseal bag included for dry storage
- Spool dimensions stated: 7.99inch diameter, 2.48inch width, 2.36inch hub hole
Cons
- Title states +/-0.03mm while the bullets state +/-0.05mm
- No warranty term is stated
- No minimum nozzle size is stated

RepRapper PLA Filament 1.75mm Glitter Black
A galaxy glitter black PLA filament at 1.75mm with a ±0.03mm tolerance, high-density metallic sparkle particles, and a mechanically wound, manually inspected spool.
Pros
- ±0.03mm tolerance with CCD diameter control
- High-density metallic sparkle for multi-angle shimmer
- Mechanically wound and manually inspected to prevent overlaps and knots
- Low warping, excellent bed adhesion and a glossy surface finish
Cons
- No warranty term is stated
- No nozzle, bed or speed settings are stated
- No spool dimensions are stated
- No drying time is stated
Other machines to compare
ELEGOO PLA 3D Printer Filament 1.75mm Galaxy Black 1KGCheck price on Amazon
EONO3D Galaxy PLA 3D Printer Filament 1.75mmCheck price on Amazon
EONO3D Glitter FilamentCheck price on Amazon
Marble PLA Filament 1.75mm 3D Printer Filament 1KG 2.2LBSCheck price on Amazon
ELEGOO Sparkle PLA 3D Printer Filament 1.75mm Bundle 4KGCheck price on Amazon
Specs compared
| Model | HQ Score | Diameter | Tolerance | Nozzle | Bed | Speed | Warranty |
|---|---|---|---|---|---|---|---|
| SUNLU Shiny Sparkle | 9.7/10 | 1.75mm | +/-0.02mm | 0.4mm | Not stated | Not stated | 1 year |
| SUNLU Galaxy PLA | 9.6/10 | 1.75mm | +/-0.02mm | 200-230℃ | 50-70℃ | 50-250mm/s | Not stated |
| ELEGOO Sparkle Black | 9.6/10 | 1.75mm | +/-0.02mm | 0.4 mm or larger | Not stated | Not stated | Not stated |
| ZIRO Diamond Black | 9.6/10 | 1.75mm | +/-0.03mm title, +/-0.05mm bullets | 190-220˚C | 50-60˚C | 30-90 mm/s | Not stated |
| RepRapper Glitter | 9.5/10 | 1.75mm | ±0.03mm | Not stated | Not stated | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026.
What the listings tell you, and what they leave out
This guide covers 5 black glitter filament listings. All 5 are 1.75mm PLA on 1kg spools with a stated tolerance, and 1 states a warranty term. 2 state nozzle and bed settings, and 2 state a print speed range. No listing states a safety certification, so every example scores zero for safety.
How to pick the best black glitter filament
Diameter and tolerance
All 5 listings state 1.75mm filament. 3 state +/-0.02mm; ZIRO states +/-0.03mm in the title and +/-0.05mm in the bullets, and RepRapper states ±0.03mm. A tight tolerance keeps extrusion steady, so check the figure before the spool goes on the printer.
Glitter that flows
Glitter particles can clog a nozzle, so the listings stress small particles and even spread. SUNLU Galaxy states pearlescent powder of less than 200µm for smooth extrusion and no clogging. SUNLU Shiny states glitter particles small enough to flow smoothly through 0.4mm nozzles. ELEGOO recommends a nozzle no smaller than 0.4 mm.
Settings to start from
2 listings state full settings. SUNLU Galaxy lists a nozzle temperature of 200-230℃, a bed temperature of 50-70℃, and a printing speed of 50-250mm/s. ZIRO lists nozzle 190-220˚C, bed 50-60˚C, speed 30-90 mm/s. The other listings do not state settings, so start from the PLA settings your printer already uses and adjust from there.
Layer lines and finish
Glitter hides layer lines. SUNLU Galaxy states the filament hides layer lines and gives a smoother, more uniform surface. SUNLU Shiny states the shimmer masks layer lines for a professional, high-end stone or metallic look. RepRapper states a glossy surface finish with low warping and excellent bed adhesion.
Storage and moisture
PLA picks up moisture, so dry storage matters. SUNLU Galaxy, SUNLU Shiny, ZIRO and RepRapper all state vacuum-sealed packaging with desiccant, and ZIRO adds a free reseal bag. ELEGOO states each spool is vacuum-sealed to prevent moisture absorption. Keep the spool in the reseal bag between prints.
Project Match
- Cosplay accessories and gallery pieces: SUNLU Galaxy PLA, listed for cosplay accessories, art and design, sculptures and gallery-ready installations.
- Decor and gift items: ELEGOO Sparkle Black, listed for artistic designs, decorations and gift items.
- Jewelry and small detailed prints: SUNLU Shiny Sparkle, with glitter particles small enough for 0.4mm nozzles.
- Long prints and overnight jobs: RepRapper Glitter, listed for overnight prints, large models and unattended jobs.
- A first spool with spares in the box: ZIRO Diamond Black, with a 5M cleaning filament and a 5M sample included.
How the scores add up
Each filament is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SUNLU Shiny Sparkle | 9.7 | 32 | 22 | 20 | n/a | 3 |
| SUNLU Galaxy PLA | 9.6 | 32 | 21 | 20 | n/a | 0 |
| ELEGOO Sparkle Black | 9.6 | 29 | 21 | 20 | n/a | 0 |
| ZIRO Diamond Black | 9.6 | 28 | 20 | 21 | n/a | 0 |
| RepRapper Glitter | 9.5 | 28 | 20 | 19 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.
FAQ: lasers and CNC
What nozzle size works with glitter filament?
ELEGOO recommends a nozzle no smaller than 0.4 mm, and SUNLU Shiny states its glitter particles flow smoothly through 0.4mm nozzles. A wider nozzle gives glitter more room, so check the listing before loading a fine nozzle.
What temperature should black glitter PLA print at?
SUNLU Galaxy lists a nozzle temperature of 200-230℃ and a bed temperature of 50-70℃, while ZIRO lists nozzle 190-220˚C and bed 50-60˚C. The other listings do not state settings, so use the PLA settings your printer already uses.
Does glitter filament hide layer lines?
The listings say so. SUNLU Galaxy states the filament hides layer lines for a smoother, more uniform surface, and SUNLU Shiny states the shimmer masks layer lines for a stone or metallic look with no sanding or painting required.
How should glitter filament be stored?
Dry and sealed. SUNLU Galaxy, SUNLU Shiny, ZIRO and RepRapper all state vacuum-sealed packaging with desiccant, and ZIRO adds a free reseal bag. Keep the spool in the reseal bag between prints to keep moisture out.
Is black glitter filament good for cosplay accessories?
Yes, for the look. SUNLU Galaxy lists cosplay accessories, home and decor, art and design, sculptures, jewelry and gallery-ready installations, and its color-changing pearlescent powder shifts color with light and angle.
Related: the best glitter 3D filament, the best silica gel desiccant packs for 3D printer filament, the best tools to clean up 3D prints and the 3D printers hub.




