Best Matte Black 3D Print Filament (2026): 5 Picks Compared
5 matte black PLA filaments compared by finish, diameter, tolerance, spool size and warranty, using only what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallFLASHFORGE Matte Black9.7/10View on Amazon - 2
High-Speed PickFLASHFORGE HS PLA+9.6/10View on Amazon - 3
Toughest MatteeSUN Matte PLA Black9.6/10View on Amazon - 4
Best Value PackELEGOO Matte PLA 2KG9.6/10View on Amazon
A matte black print hides layer lines and gives a model, a cosplay prop or a shop sample a soft, even look straight off the build plate. This guide compares the best matte black 3d print filament packs on the numbers that decide the finish: the stated finish, the diameter, the tolerance, the spool size and the warranty term.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall FLASHFORGE Matte Black: True matte black, 1 kg spool, 0.02 mm tolerance, 1-year warranty Check price on Amazon
- High-Speed Pick FLASHFORGE HS PLA+: Rated for 500 mm/s rapid printing with a sleek matte finish Check price on Amazon
- Toughest Matte eSUN Matte PLA Black: Higher toughness and better adhesion, deep black matte finish Check price on Amazon
- Best Value Pack ELEGOO Matte PLA 2KG: 2 kg of matte PLA as two 1 kg spools Check price on Amazon
Machines on the list

FLASHFORGE PLA Filament 1.75mm +/- 0.02mm
A 1 kg spool of matte black PLA at 1.75 mm with a +/- 0.02 mm tolerance, dried for 24 hours and vacuum sealed, with a 1-year warranty.
Pros
- Matte black finish that minimizes gloss and conceals layer lines
- 1.75 mm diameter with a tolerance of +/- 0.02 mm
- Dried for 24 hours and vacuum sealed, with clog-free and bubble-free printing stated
- 1-year warranty stated
Cons
- Only a 1 kg spool is stated, with no larger pack in the listing
- No desiccant bag is stated in the packaging
- No printer models are named, only most FDM printers
- No print speed is stated

eSUN Matte PLA Filament 1.75mm
A 1 kg spool of deep black matte PLA at 1.75 mm on a paper reel, with higher toughness and better adhesion stated, and a vacuum bag with a desiccant bag.
Pros
- Deep black matte surface with no obvious layer lines
- Higher toughness and better adhesion than normal PLA as stated
- Paper reel, with a sealed vacuum bag and a desiccant bag
- Fits named printers: Bambu Lab P1P and X1, Voron 2.4, Raise3D, Prusa and Creality Ender 3 and 7
Cons
- No warranty term is stated
- No diameter tolerance figure is stated
- 1 kg spool only, with no 2 kg pack stated
- No print speed is stated

FLASHFORGE High Speed PLA+ 3D Printer Filament
A high-speed PLA+ filament rated for 500 mm/s rapid printing, with a sleek matte finish in black and a 1.75 mm diameter for most FDM printers.
Pros
- Rated for 500 mm/s rapid printing with enhanced melt flow
- Sleek matte finish with rich and solid color
- Compatible with 99% of FDM printers as stated
- Dried for 24 hours and vacuum sealed with desiccant
Cons
- No diameter tolerance figure is stated
- No print temperature is stated
- No layer-line claim is made in the listing

ELEGOO Matte PLA 3D Printer Filament Black & White
A 2 kg pack of matte PLA in black and white, as two 1 kg cardboard spools at 1.75 mm, with a matte low-gloss finish and nearly invisible layer lines.
Pros
- Matte low-gloss finish with nearly invisible layer lines
- 2 kg pack as two 1 kg cardboard spools
- Neatly wound spools that prevent tangles and feeding issues
- Fits Neptune, Ender, Kobra and A1 series printers as stated
Cons
- No warranty term is stated
- Only 1 kg of the 2 kg pack is black; the other spool is white
- Enclosed printers must keep the door open when printing this filament

ELEGOO PLA 3D Printer Filament 1.75mm Black 2KG
A 2 kg pack of black PLA at 1.75 mm, two 1 kg cardboard spools with a +/- 0.02 mm tolerance, less-tangle winding and vacuum-sealed packaging.
Pros
- 2 kg pack as two 1 kg cardboard spools
- 1.75 mm diameter with a tolerance of +/- 0.02 mm
- Less-tangle winding with a larger spool inner diameter for easy feeding
- Vacuum sealed against moisture, with clogging-free and bubble-free printing stated
Cons
- States a glossy surface finish, not a matte one
- Only a 30-day guarantee is stated, not a longer warranty
- No matte finish is stated anywhere in the listing
- No printer models are named, only most FDM printers
Other machines to compare
ELEGOO Matte PLA 3D Printer Filament 1.75mm Black 2KGCheck price on Amazon
iSANMATE Black Matte PLA Filament 1.75mm 1KG/2.2lb for FDM 3DCheck price on Amazon
SUNLU High Speed Matte PLA 3D Printer Filament 1.75mm 1KGCheck price on Amazon
3DHoJor Matte PLA 3D Printing Filament BlackCheck price on Amazon
ANYCUBIC Matte PLA Filament 1.75mmCheck price on Amazon
Specs compared
| Filament | HQ Score | Diameter | Finish | Spool | Tolerance | Warranty |
|---|---|---|---|---|---|---|
| FLASHFORGE Matte Black | 9.7/10 | 1.75 mm | Matte | 1 kg | +/- 0.02 mm | 1 year |
| FLASHFORGE HS PLA+ | 9.6/10 | 1.75 mm | Matte | Not stated | Not stated | Two-month |
| eSUN Matte PLA Black | 9.6/10 | 1.75 mm | Matte | 1 kg | Not stated | Not stated |
| ELEGOO Matte PLA 2KG | 9.6/10 | 1.75 mm | Matte | 2 kg | +/- 0.02 mm | Not stated |
| ELEGOO PLA Black 2KG | 9.5/10 | 1.75 mm | Glossy | 2 kg | +/- 0.02 mm | 30 days |
Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026. Diameter is the filament diameter, and the finish is the surface the listing states.
What the listings tell you, and what they leave out
Only 3 of the 5 listings state a warranty term. The FLASHFORGE matte black states 1 year, the ELEGOO PLA states a 30-day guarantee, and the FLASHFORGE HS PLA+ bullets state two months while its spec table states 1 year. The ELEGOO matte title states a tolerance of plus or minus 0.02 mm while a bullet states plus or minus 0.2 mm, and the ELEGOO PLA states a glossy finish, not a matte one.
Buying guide: choosing the best matte black 3d print filament
Check the finish first
Matte is the whole point of this guide, so read the finish line first. The ELEGOO Matte PLA, the eSUN Matte PLA and both FLASHFORGE spools state a matte finish. The ELEGOO PLA states a glossy surface finish instead, so it does not belong in a matte shortlist even though the filament is black.
Diameter and tolerance
Every spool here is 1.75 mm, so the diameter does not separate them. The FLASHFORGE matte black, the ELEGOO PLA and the ELEGOO matte title state plus or minus 0.02 mm, while the eSUN and the FLASHFORGE HS PLA+ state no tolerance figure at all.
Spool size, speed and warranty
The FLASHFORGE matte black and the eSUN come as 1 kg spools, while the ELEGOO Matte PLA and the ELEGOO PLA come as 2 kg packs of two 1 kg spools. The FLASHFORGE HS PLA+ states no spool size but rates 500 mm/s rapid printing. For warranty, the FLASHFORGE matte black states 1 year, the ELEGOO PLA states a 30-day guarantee, and the FLASHFORGE HS PLA+ bullets state two months.
ELEGOO notes that if you print its matte PLA in an enclosed printer, keep the door open.
Project Match
- Models and prototypes: FLASHFORGE HS PLA+ and FLASHFORGE Matte Black, both listed for model making and prototyping.
- Decorative pieces and cosplay: eSUN Matte PLA, listed for home decoration, toys, sculpture and cosplay.
- Prints where layer lines should stay hidden: ELEGOO Matte PLA with nearly invisible layer lines, eSUN Matte PLA with no obvious layer lines, and FLASHFORGE Matte Black, which conceals layer lines.
- Long print runs: ELEGOO Matte PLA and ELEGOO PLA, each sold as a 2 kg pack of two 1 kg spools.
- Fast printing: FLASHFORGE HS PLA+, rated for 500 mm/s rapid printing.
How the scores add up
Each filament is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| FLASHFORGE Matte Black | 9.7 | 32 | 21 | 21 | 7 | 4 |
| eSUN Matte PLA Black | 9.6 | 30 | 22 | 21 | 7 | 0 |
| FLASHFORGE HS PLA+ | 9.6 | 32 | 21 | 20 | 7 | 0 |
| ELEGOO Matte PLA 2KG | 9.6 | 29 | 21 | 22 | 7 | 0 |
| ELEGOO PLA Black 2KG | 9.5 | 26 | 20 | 21 | 7 | 1 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
What diameter do these filaments use?
All 5 use 1.75 mm filament. The FLASHFORGE matte black, the ELEGOO PLA and the ELEGOO Matte PLA state a tolerance of plus or minus 0.02 mm, while the eSUN and the FLASHFORGE HS PLA+ state no tolerance figure.
Which matte black filament has a warranty?
The FLASHFORGE matte black states 1 year, the ELEGOO PLA states a 30-day guarantee, and the FLASHFORGE HS PLA+ bullets state two months while its spec table states 1 year. The eSUN and the ELEGOO Matte PLA state no warranty term.
Can I print matte PLA on any FDM printer?
Every listing here states 1.75 mm filament for most FDM printers. The eSUN names Bambu Lab P1P and X1, Voron 2.4, Raise3D, Prusa and Creality Ender 3 and Ender 7, and the FLASHFORGE HS PLA+ states compatibility with 99% of FDM printers.
Does matte PLA hide layer lines?
Yes, when the listing says so. The ELEGOO Matte PLA states nearly invisible layer lines, the eSUN states no obvious layer lines, and the FLASHFORGE matte black states that it conceals layer lines. The ELEGOO PLA states a glossy finish instead.
Related: the 3D printer hub, our best matte 3D printer filament guide, the eSUN matte PLA vs ELEGOO matte PLA comparison, and our best hygrometer for filament storage picks.




