Best Matte Black TPU Filament (2026): 5 Picks for Flexible Parts
Black TPU filaments in 85A and 95A, compared by stated print speed, matte finish, dimensional accuracy and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallOVERTURE TPU 2.09.5/10View on Amazon - 2
Best Matte FinishPolymaker TPU95 Matte9.5/10View on Amazon - 3
Best for Soft PrintsSiraya Tech Flex 85A9.5/10View on Amazon - 4
Best for Tough PartsCreality TPU 95A9.5/10View on Amazon
A phone case that bends instead of cracking, a grip that stays soft in the hand, a seal that flexes with the part it protects: flexible prints start with the right filament. This roundup compares the best matte black TPU filament options on what each listing states, from hardness and print speed to finish, shelf life and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall OVERTURE TPU 2.0: A 95A spool rated below 200 mm/s with beginner presets, a 1-year shelf life and a stated 1-year warranty. Check price on Amazon
- Best Matte Finish Polymaker TPU95 Matte: The only stated matte finish here, with a rated speed of up to 250mm/s and a stated accuracy of plus or minus 0.03mm. Check price on Amazon
- Best for Soft Prints Siraya Tech Flex 85A: An 85A spool, the most pliable here, that cites ISO 10993-10, -5 and -23 and states up to 3 years of shelf life. Check price on Amazon
- Best for Tough Parts Creality TPU 95A: A 95A spool that states wear, aging and UV resistance with a 12-month service term. Check price on Amazon
Machines on the list

OVERTURE Upgrade TPU 2.0 High-Speed Filament
A 95A TPU 2.0 spool rated below 200 mm/s, with beginner presets in major slicers, a stated 1-year shelf life and a 1-year warranty.
Pros
- Rated high-speed printing below 200 mm/s
- 95A hardness with stated impact absorption and rebound elasticity
- Works with common TPU and TPU HS default presets in major slicers
- Stated 1-year warranty and 1-year shelf life for unopened spools
Cons
- No matte finish stated, so the surface is Not stated rather than matte
- No dimensional tolerance stated
- No safety statement or standard cited in the listing
- Shelf life applies to unopened spools with proper storage

Polymaker Matte TPU Filament 1.75mm
A matte 95A TPU that Polymaker rates at up to 250mm/s, with a stated accuracy of plus or minus 0.03mm and a low-gloss finish in 15 colors.
Pros
- Rated print speed of up to 250mm/s, 5 times the 50mm/s reference speed of Polymaker standard TPU95
- Low-gloss matte finish, the only matte finish stated in this roundup
- Stated accuracy of plus or minus 0.03mm, the only tolerance stated here
- 15 colors to choose from, in classic shades and soft pastel tones
Cons
- No warranty term in the listing
- The rated 250mm/s speed varies by printer, settings and model geometry, as the listing itself notes
- The 5x faster claim compares against Polymaker own standard TPU95, not against other brands
- No shelf life stated for the spool

Siraya Tech Flex TPU 85A 3D Printer Filament
An 85A TPU, the most pliable spool here, that cites ISO 10993-10, -5 and -23 and ships in a moisture-resistant aluminum bag with a stated 3-year shelf life.
Pros
- 85A hardness, the most pliable spool in this roundup, for softer and pliable prints
- Cites ISO 10993-10, -5 and -23 protocols for biological response data
- Moisture-resistant aluminum resealable bag with up to 3 years of shelf life
- High-flow design for quicker prints than typical TPU 95A, as the listing states
Cons
- No print speed number stated, only a high-flow claim
- No warranty term in the listing
- The listing recommends a direct drive style extruder for the optimal printing experience
- No matte finish stated

Creality TPU 95A Flexible 3D Printer Filament
A 95A TPU that states wear resistance, chemical resistance and a nontoxic material, with a 12-month after-sales service term.
Pros
- 95A hardness with stated wear resistance and aging resistance
- States chemical resistance to water, oil and solvents, and a nontoxic material
- States UV resistance for durability
- 12-month after-sales service stated in the listing
Cons
- States good glossiness, the opposite of the matte finish this roundup looks for
- No print speed stated
- No dimensional tolerance stated
- No shelf life stated

ELEGOO TPU 3D Printer Filament 1.75mm Black 1KG
A 95A TPU that states it stretches up to 5 times its original size, with vacuum-sealed packaging and a recommendation to dry the filament before printing.
Pros
- Stretches up to 5 times its original size without breaking, as the listing states
- 95A hardness with stated impact resistance for parts built to withstand impacts, collisions and drops
- Dried before packaging and vacuum sealed to protect against moisture
- States dimensional accuracy and consistent, smooth feeding at 1.75mm
Cons
- No print speed stated
- No warranty term in the listing
- No matte finish stated
- The listing recommends drying the filament before printing, so it needs a dryer or dry storage
Other machines to compare
OVERTURE High Speed TPUCheck price on Amazon
iSANMATE HS TPU Filament 1.75mmCheck price on Amazon
SUNLU TPU 95A Flexible 3D Printing Filament 1.75mmCheck price on Amazon
Comgrow TPU FilamentCheck price on Amazon
SainSmart TPU Filament 1.75Check price on Amazon
Specs compared
| Model | HQ Score | Hardness | Rated speed | Finish | Accuracy | Shelf life | Warranty |
|---|---|---|---|---|---|---|---|
| OVERTURE TPU 2.0 | 9.5/10 | 95A | Below 200 mm/s | Not stated | Not stated | 1 year, unopened | 1 year |
| Polymaker TPU95 Matte | 9.5/10 | 95A | 250mm/s | Low-gloss matte | Plus or minus 0.03mm | Not stated | Not stated |
| Siraya Tech Flex 85A | 9.5/10 | 85A | Not stated | Not stated | Not stated | Up to 3 years | Not stated |
| Creality TPU 95A | 9.5/10 | 95A | Not stated | Glossy | Not stated | Not stated | 12-month service |
| ELEGOO TPU 95A | 9.4/10 | 95A | Not stated | Not stated | Not stated | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026. Speed is the rated print speed each listing states, and a blank means the listing states no speed.
What the listings tell you, and what they leave out
We read 5 listings. All 5 are black 1.75mm TPU on 1kg spools, and all 5 name the FDM printers they fit. All but 1 of the 5 state 95A hardness, and the Siraya Tech spool states 85A. Only 2 of the 5 state a rated print speed: Polymaker at up to 250mm/s, and OVERTURE at below 200 mm/s. Only 1 of the 5 states a dimensional tolerance, Polymaker at plus or minus 0.03mm, and only 1 of the 5 states a matte finish, also Polymaker. Only 1 of the 5 cites a standard, Siraya Tech with ISO 10993-10, -5 and -23. Only 2 of the 5 state a warranty or service term: OVERTURE with a 1-year warranty, and Creality with a 12-month after-sales service term.
The listings also disagree with the keyword in one place. Creality states good glossiness, the opposite of the matte finish this roundup looks for, so it is the glossy pick in a matte set. No listing states a nozzle temperature, a bed temperature, or a retraction setting, so this roundup scores what each listing does state: hardness, speed, finish, shelf life, safety statements and warranty.
Buying guide: the best matte black tpu filament
Hardness: 85A or 95A
Shore hardness is the number each listing leads with: 95A on all but 1 of the 5 spools, and 85A on the Siraya Tech spool. The 85A listing calls its filament softer and pliable, and names footwear and protective gear as its uses. The 95A listings describe a balance of softness and toughness, and name parts that bend and cushion impact. Pick 85A for the most pliable parts, and 95A for parts that also need to hold their shape.
Print speed
Only 2 of the 5 listings state a rated speed. Polymaker rates its matte TPU at up to 250mm/s, and says that is 5 times the 50mm/s reference speed of its standard TPU95. OVERTURE rates its TPU 2.0 at below 200 mm/s. The other 3 listings state no speed, so speed is not comparable across the whole set, and a fast rated speed still varies by printer, settings and model geometry.
Matte finish
Only 1 of the 5 listings states a matte finish. Polymaker calls its surface low-gloss matte, and names phone cases, grips, protective covers and wearable accessories as the parts it suits. Creality states the opposite, good glossiness. The other listings state no finish, so their surface is Not stated rather than matte.
Drying and storage
TPU absorbs moisture, and the listings say so in their own words. Siraya Tech seals its spool in a moisture-resistant aluminum bag and states up to 3 years of shelf life. OVERTURE states a 1-year shelf life for unopened spools with proper storage. ELEGOO dries its filament before packaging, vacuum seals it, and still recommends drying it before printing. Creality says to store the spool in a dry and ventilated place, away from high temperature, sun and humidity.
Project Match
- Phone cases, grips and protective covers: Polymaker TPU95 Matte, the only pick with a stated low-gloss matte finish.
- Footwear and protective gear: Siraya Tech Flex 85A, the most pliable pick at 85A.
- Protective cases and flexible hinges: OVERTURE TPU 2.0, with beginner presets and a stated 1-year warranty.
- Rubber seals, shoes and cell phone cases: Creality TPU 95A, which states wear resistance and a 12-month service term.
- Parts that stretch and take impacts: ELEGOO TPU 95A, which states it stretches up to 5 times its original size.
How the scores add up
Each spool is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| OVERTURE TPU 2.0 | 9.5 | 30 | 21 | 20 | 0 | 2 |
| Polymaker TPU95 Matte | 9.5 | 34 | 22 | 21 | 0 | 0 |
| Siraya Tech Flex 85A | 9.5 | 28 | 21 | 20 | 3 | 0 |
| Creality TPU 95A | 9.5 | 29 | 20 | 19 | 0 | 2 |
| ELEGOO TPU 95A | 9.4 | 29 | 20 | 20 | 0 | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
FAQ: lasers and CNC
What is TPU filament?
TPU is a flexible filament for FDM 3D printers. All 5 spools here are 1.75mm black TPU on 1kg spools, and each listing describes parts that bend, flex or stretch instead of snapping.
What does 95A mean?
95A is the Shore hardness each listing states for all but 1 of the 5 spools. The Siraya Tech listing calls its 85A filament softer and pliable, while the 95A listings describe a balance of softness and toughness for parts that bend and cushion impact.
Do I need a direct drive extruder for TPU?
Siraya Tech recommends a direct drive style extruder for the optimal printing experience with its 85A filament. The other listings say their spools fit most FDM printers, and OVERTURE adds that its TPU works with common TPU presets in major slicers.
How fast can I print TPU filament?
It depends on the spool. Polymaker rates its matte TPU at up to 250mm/s, and OVERTURE rates its TPU 2.0 at below 200 mm/s. The other 3 listings state no print speed.
How should I store TPU filament?
Keep it dry. Siraya Tech ships its spool in a moisture-resistant aluminum bag and states up to 3 years of shelf life, and OVERTURE states a 1-year shelf life for unopened spools with proper storage. ELEGOO recommends drying its filament before printing, and Creality says to store the spool in a dry and ventilated place.
Related: the 3D printer hub, TPU vs TPE filament, and how to dry filament. Also see our PLA vs TPU filament. Also see our PETG vs TPU filament. Also see our nylon vs TPU filament. Also see our best filament dryer for TPU. Also see our best build plate for TPU. Also see our 3D printer filament types. Also see our best matte finish PETG filament. Also see our best matte ABS filament.




