Best 3d Printer Enclosure for Ender 3 (2026): 5 Picks Compared
5 printer tents for Ender 3 owners, compared by size, fit, ventilation, flame resistance and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCreality Enclosure9.7/10View on Amazon - 2
Best VentilationVEVOR Enclosure9.6/10View on Amazon - 3
Best for Exhaust KitsYOOPAI Enclosure-BV9.5/10View on Amazon - 4
Best with LEDYOOPAI Enclosure-M9.5/10View on Amazon
A tall vase print lifts at the corners overnight, and by morning the base has curled away from the bed. The room cools after dark, a draft crosses the bench, and the print that looked fine at noon comes off the plate warped. The best 3d printer enclosure for ender 3 holds warm air around the print, keeps dust off the bed, and gives an Ender 3 a steady place to work through a long print.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Creality Enclosure: Flame resistance check passed, smoke exhaust interface and a 3-year limited warranty in a 550 x 650 x 750 mm tent. Check price on Amazon
- Best Ventilation VEVOR Enclosure: Ventilation system, 3 acrylic panels and LED in a 23.6 x 23.6 x 31.5 in tent for Bambu Lab, Ender and Neptune printers. Check price on Amazon
- Best for Exhaust Kits YOOPAI Enclosure-BV: Dedicated exhaust opening and external filament port in a 29.5 x 25.6 x 21.6 in tent. Check price on Amazon
- Best with LED YOOPAI Enclosure-M: Built-in LED light strip and 5 minute install in a 21.7 x 25.6 x 30.7 in tent. Check price on Amazon
Machines on the list

Creality Official 3D Printer Enclosure with Fan
The official Creality tent for Ender 3 and Ender 5 printers, with a flame resistance check passed, a smoke exhaust interface and a 3-year limited warranty with lifetime technical assistance.
Pros
- Passed a flame resistance check
- Smoke exhaust interface for a smoke exhaust kit
- 3-year limited warranty with lifetime technical assistance
- Pure aluminum film interior with flame-retardant exterior
Cons
- Title lists 480 x 600 x 720 mm, bullets list 550 x 650 x 750 mm
- Smoke exhaust kit is not included
- No weight stated
- No install time stated

VEVOR 3D Printer Enclosure with Ventilation
A 23.6 x 23.6 x 31.5 in tent with a ventilation system, 3 transparent acrylic panels, an LED light and 3 PVC foam boards, for Bambu Lab, Ender, Neptune and Kobra printers.
Pros
- Ventilation system expels smoke and dust
- 3 transparent acrylic panels for clear observation
- LED light illuminates the print area
- Fits Bambu Lab A1, Ender 3 V3, Neptune 4 Pro and Kobra2 Pro
Cons
- No warranty term stated
- No flame claim stated
- 33.73 lb
- No install time stated

YOOPAI 3D Printer Enclosure
A 29.5 x 25.6 x 21.6 in tent with a dedicated exhaust opening, an external filament port and fire-resistant materials, for Ender 3, Ender 5 and Ender 6 SE printers.
Pros
- Dedicated opening for fan-based exhaust accessories
- Small port for external filament feeding
- Installs in about five minutes
- Fire-resistant materials and sturdy structure
Cons
- No warranty term stated
- No LED light stated
- Printer must stay smaller than 29.5 x 25.6 x 21.6 in, spool holder included
- Exhaust opening only; no fan included

3D Printer Enclosure with LED Lighting Constant
A medium tent with a built-in LED light strip, a 21.7 x 25.6 x 30.7 in interior and fire-resistant materials, for Ender 3 V3 SE and KE, Ender 3, PRUSA MK3S and AnkerMake printers.
Pros
- Built-in LED light strip
- 21.7 x 25.6 x 30.7 in interior
- 5 minutes easy installation
- Fire-resistant materials and sturdy structure
Cons
- Warranty reads '180-Warranty' with no unit stated
- No ventilation system stated
- No exhaust opening stated

Creality 3D Printer Enclosure Fireproof
A folding 480 x 600 x 720 mm tent for Ender 3, Ender 5, Anycubic Kobra and ELEGOO Neptune 3 printers, with a flame resistance check passed and a pure aluminum film interior.
Pros
- Passed a flame resistance check
- Pure aluminum film interior
- Folding storage, easy to carry
- Tool pockets for small tools
Cons
- Listing names iron pipes and glass fiber rod pipes for the frame
- No warranty term stated
- No LED light stated
- No ventilation system stated
Best 3d printer enclosure for ender 3: compare the picks
| Model | HQ Score | Size | Fit | Features | Warranty |
|---|---|---|---|---|---|
| Creality Enclosure | 9.7/10 | 550 x 650 x 750 mm (bullets); 480 x 600 x 720 mm (title) | Ender 3 V3 SE/KE, Ender 3, Ender 3 Pro, Ender 3V2, Ender 3S1, Neo; Ender 5 range | Flame resistance check passed; smoke exhaust interface | 3-year limited |
| VEVOR Enclosure | 9.6/10 | 23.6 x 23.6 x 31.5 in | Bambu Lab A1, Ender 3 V3, Ender-3 S1 Pro, Ender-3 V2, Neptune 4 Pro, Kobra2 Pro | Ventilation system; LED; 3 acrylic panels | Not stated |
| YOOPAI Enclosure-BV | 9.5/10 | 29.5 x 25.6 x 21.6 in | Ender 3V2, 3V2 Neo, 3S1, 3S1 Pro, 3S1 Plus, 3Pro, 3, 3Neo, 3Max, 6SE; Ender 5 range; Anycubic Kobra; ELEGOO Neptune | Exhaust opening; filament port | Not stated |
| YOOPAI Enclosure-M | 9.5/10 | 21.7 x 25.6 x 30.7 in (bullets); 45.0 x 25.0 x 80.0 in (spec table) | Ender 3 V3 SE/KE, Ender 3 series; Neptune 3/4 Pro; PRUSA MK3S; AnkerMake M5/M5C | LED light strip; 5 minute install | Not stated |
| Skouphy Ender Tent | 9.5/10 | 480 x 600 x 720 mm | Ender 3V2, 3V2 Neo, 3S1, 3Pro, 3, 3Neo; Ender 5, 5S1; Anycubic Kobra; ELEGOO Neptune 3 | Flame resistance check passed; tool pockets | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 5 November 2026. Where a listing contradicts itself, each figure is shown.
What the listings tell you
This roundup covers 5 listings. All 5 name Ender 3 fit, and 4 of the 5 name flame resistance or fire-resistant materials. Only 1 states a concrete warranty term, and the YOOPAI LED and Creality listings each give sizes that do not match their own titles or spec tables, so the review for each one names the mismatch.
Buying guide: enclosures for Ender 3
Measure before ordering
Measure the printer with the spool holder on: the YOOPAI BV listing says the printer, spool holder height included, must stay smaller than 29.5 x 25.6 x 21.6 in, and the VEVOR listing gives the same advice. The Skouphy tent lists 480 x 600 x 720 mm, while the Creality bullets list 550 x 650 x 750 mm against a title figure of 480 x 600 x 720 mm, so check the size lines before ordering.
Ventilation and fumes
An enclosure holds warm air in, and it holds fumes in too. The VEVOR tent has a ventilation system that expels smoke and dust after printing, and the Creality tent has a smoke exhaust interface for a smoke exhaust kit, which the listing says is not included. The YOOPAI BV tent has a dedicated opening on the right side for fan-based exhaust accessories. Vent smoke outdoors where the listing provides a vent or fan interface.
Flame resistance
4 of the 5 tents name flame resistance in the listing: the Skouphy tent and the Creality tent passed a flame resistance check, and the YOOPAI tents list fire-resistant materials. The VEVOR tent states no flame claim, so its safety case rests on the ventilation system and the enclosed structure. The Skouphy listing says the tent will melt and not catch fire itself if a fire starts, and the Creality listing pairs a flame-retardant exterior with a pure aluminum film interior.
LED light and visibility
Light helps when a print runs after dark: the YOOPAI LED tent has a built-in LED light strip, and the VEVOR tent has an LED light with 3 transparent acrylic panels for watching the print. The Skouphy tent offers multi-faceted observation with reserved tool pockets, and the YOOPAI BV tent has a small port on the left side for external filament feeding.
Enclosures hold heat and fumes in, which is the point, and the risk to manage. Vent smoke outdoors where the listing provides a vent or fan interface, keep the tent clear of heaters and open flame, and never leave a running printer unattended. The VEVOR tent states a ventilation system, the Creality tent states a smoke exhaust interface, and the YOOPAI BV tent states an opening for fan-based exhaust accessories. The Skouphy and YOOPAI LED tents state no vent, so plan airflow before a long print.
Project Match
- High-temperature filament prints: the Skouphy tent, which the listing says suits high temperature filaments and bed adhesion at high temperatures.
- Long prints that need a steady temperature: the Creality tent and the YOOPAI tents, which list a constant temperature printing environment.
- Prints that need smoke or dust cleared after printing: the VEVOR tent, with a ventilation system, and the Creality tent, with a smoke exhaust interface.
- Prints in a shared room: the YOOPAI tents, which list noise isolation on all six sides.
- Bambu Lab A1 prints: the VEVOR tent, which lists Bambu Lab A1 fit.
How the scores add up
Each tent is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing, and only 1 of the 5 gives a concrete warranty term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Creality Enclosure | 9.7 | 32 | 22 | 20 | 8 | 4 |
| VEVOR Enclosure | 9.6 | 30 | 21 | 20 | 5 | 0 |
| YOOPAI Enclosure-BV | 9.5 | 29 | 20 | 20 | 5 | 0 |
| YOOPAI Enclosure-M | 9.5 | 30 | 19 | 19 | 5 | 0 |
| Skouphy Ender Tent | 9.5 | 28 | 19 | 18 | 7 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
Will an enclosure fit an Ender 3 V2?
All 5 tents here list Ender 3 V2 fit, and the Skouphy, YOOPAI BV and Creality tents also list Ender 3, Ender 3 Pro, Ender 3 S1 and Ender 3 V2 Neo fit. Measure the printer with the spool holder on and match it to the listing size.
Does an enclosure help with warping?
The listings say a constant temperature helps: the VEVOR tent says it reduces warping and cracking, and the Creality tent says it reduces cracking, warping and shrinkage. The Skouphy tent says a constant temperature helps with bed adhesion at high temperatures.
Do these enclosures have ventilation?
The VEVOR tent has a ventilation system that expels smoke and dust after printing. The Creality tent has a smoke exhaust interface, with the kit not included. The YOOPAI BV tent has an opening for fan-based exhaust accessories. The Skouphy and YOOPAI LED tents state no vent.
What flame protection do these enclosures state?
The Skouphy tent and the Creality tent passed a flame resistance check, with flame retardant exterior materials and a pure aluminum film interior. The YOOPAI tents list fire-resistant materials. The VEVOR tent states no flame claim.
How long does installation take?
The YOOPAI LED tent states 5 minutes for installation, and the YOOPAI BV tent states about five minutes. The Skouphy tent states quick and easy installation with no time given, and the VEVOR and Creality tents state no install time.
Related: the 3D printer hub, the best large 3D printer enclosure with ventilation, the best 3D printer enclosure heater and the enclosed vs open 3D printer.




