Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Use a 3D Scanner: Beginner Steps

Learn how to use a 3D scanner: install the software, prepare the object, scan in slow passes, clean the mesh and export a file ready for 3D printing.

How to Use a 3D Scanner: Beginner Steps
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Revopoint MIRACO Plus 3D ScannerRevopoint MIRACO Plus 3D Scanner9.7/10View on Amazon
  2. 2Rosjoy 500 Dots 6mm & 3mm Magnetic 3D Scanning Markers for 3DRosjoy 500 Dots 6mm & 3mm Magnetic 3D Scanning Markers for 3D9.7/10View on Amazon
  3. 3Creality Pika 3D ScannerCreality Pika 3D Scanner9.7/10View on Amazon

Picture a small part you need again: a bracket that snapped, a knob that went missing, a figurine you want to copy for a gift. Buying a replacement means waiting, and modelling it from scratch means hours at a screen. How to use a 3D scanner turns that part into a digital model you can print, and the whole job comes down to a short run of moves: install the software, prepare the object, scan in slow passes, check the light, clean up the mesh and export a file your printer can read. The sections below walk through each move in order, with the mistakes that cost beginners the most time.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

Every figure in this guide comes from the maker. Where the maker stays silent, the guide says so rather than guessing.

Step 1: Install the software and check the computer

Start with the software, not the scanner. The Creality CR-Scan Ferret Pro (on Amazon) works with Windows, Mac OS, Android and iOS. The maker states Windows needs an i5 8th generation processor or newer, Mac needs an M1 to M4 chip or an Intel i5 or newer, and the computer needs 8GB of RAM or more, with 4GB for iOS. The 3DMakerpro Seal Lite and the Fox scanner both work with Windows 10 and 11 and macOS 12/13, and the 3DMakerpro Moose Lite works with Windows and macOS. The 3DMakerpro models and the Fox scanner use JMStudio software. Install it first and confirm the computer sees the scanner before you start.

Step 2: Pick an object the scanner can see

Handheld scanners read shape from light, so the object matters as much as the scanner. The Fox scanner handles objects from 40mm to 1200mm, and the 3DMakerpro Moose Lite (on Amazon) handles objects from about 15mm to 1500mm, with a working distance of 150 to 400mm. Small, detailed objects suit the Seal Lite, which the maker pairs with body parts, models and art; the 3D scanner for small parts guide covers that choice in detail.

Dark, shiny and matte surfaces used to need a spray coating. The Creality Ferret Pro scans black, metal and matte objects without spray when you select texture mode, and the Fox scanner uses a near-infrared optical system that performs well on many matte, dark and low-reflective surfaces. If the object is glossy and featureless, add small pieces of tape as landmarks so the software has features to track.

Step 3: Scan in slow, steady passes

Hold the scanner at the working distance and move it slowly around the object, letting each pass overlap the last. The Creality Ferret Pro scans at up to 30FPS, and the Moose Lite runs at up to 10fps, so a slow pace gives the software more frames to stitch. The Ferret Pro uses one-shot 3D imaging for anti-shake tracking, the Seal Lite uses anti-shake lenses with optical stabilization, and the Moose Lite has scan-back and anti-shake functions. If tracking drops, the Fox scanner uses AI visual tracking to re-lock onto areas you already scanned. The Fox weighs 210g and the Seal Lite weighs 225g, so either one stays comfortable in the hand.

Work around the object in a loop, then tilt it to catch the top and the underside. The Seal Lite captures 100,000 points per second, so slow passes give the software dense data to stitch. Watch the live preview on screen: bare patches are areas you still need to cover.

Step 4: Mind the light

Light makes or breaks a scan. The Seal Lite offers 9 levels of light adjustment for low-light conditions and different colors and materials. The Creality Ferret Pro supports outdoor scanning in light up to 30,000 lux. The Moose Lite is a different case: the maker recommends indoor scanning for more consistent performance, and the same indoor advice applies to most first scans. Avoid direct sun on the object. Outdoor support has a light limit: the Ferret Pro states up to 30,000 lux.

Step 5: Clean up the mesh and export the file

When the scan is complete, the software turns the point cloud into a mesh. The Fox scanner offers one-click model processing in JMStudio, which performs point cloud alignment, fusion, noise reduction and mesh optimization. Check the mesh for holes and stray points, then trim the edges. Color comes from the scanner: the Creality Ferret Pro records a 24-bit full-color scan, while the Moose Lite captures mono texture only. Export the finished model in OBJ, STL, PLY or ASC format; the Seal Lite, Fox and Moose Lite all export those formats, and STL is the usual choice for 3D printing.

Step 6: Send the model to the printer

Open the exported file in your slicer and check the size against the object you scanned. If the model needs a printer, the what 3D printer should I get guide walks through the choice, and the 3D printer kits for beginners page covers starter machines. Print a small version first to check the fit. If the size is wrong, measure the object and scale the mesh to match instead of guessing.

Common mistakes to avoid

  • Starting the scan before the software is installed and the computer is connected.
  • Moving the scanner fast and leaving gaps the software cannot stitch.
  • Scanning a glossy or featureless object with no landmarks for tracking.
  • Scanning in bright light with a model the maker recommends for indoor use.
  • Exporting the raw scan without cleaning the mesh or checking for holes.

How to use a 3D scanner: the short version

  1. Install the software and confirm the computer meets the stated requirements.
  2. Pick an object inside the stated size range and prepare the surface.
  3. Scan in slow, overlapping passes and watch the live preview.
  4. Adjust the light to the room and the object.
  5. Clean the mesh and export it in OBJ, STL, PLY or ASC format.
  6. Open the file in a slicer and print a small version to check the fit.

FAQ: lasers and CNC

Can I use a 3D scanner outdoors?

It depends on the model. The Creality Ferret Pro supports outdoor scanning in light up to 30,000 lux, while the 3DMakerpro Moose Lite is recommended for indoor scanning.

What accuracy do I need for 3D printing?

The Seal Lite states accuracy of 0.02mm, the Moose Lite states up to 0.05mm, the Fox states up to 0.07mm and the Creality Ferret Pro states up to 0.1mm. Finer accuracy helps with small, detailed parts, while a looser figure is enough for large, simple shapes.

What file formats can I export from a 3D scanner?

The Seal Lite, Fox and Moose Lite export OBJ, STL, PLY and ASC formats. STL is the usual choice for 3D printing, while OBJ carries color data when the scan has it.

How big an object can a handheld 3D scanner capture?

The Fox scanner covers objects from 40mm to 1200mm, and the Moose Lite covers objects from about 15mm to 1500mm. Match the stated range to the largest object you plan to scan. For larger subjects such as car parts, see the 3D scanner for car parts guide.

Do I need markers to scan with a handheld 3D scanner?

Not always. The Fox scanner uses AI visual tracking with marker-free scanning, and it re-locks onto scanned areas if tracking is interrupted. The Creality Ferret Pro uses anti-shake tracking with one-shot 3D imaging.

What computer do I need to run a 3D scanner?

The Creality Ferret Pro needs Windows with an i5 8th generation processor or newer, or a Mac with an M1 to M4 chip or an Intel i5 or newer, plus 8GB of RAM or more, with 4GB for iOS. The Seal Lite and Fox work with Windows 10 and 11 and macOS 12/13.

Related: the 3D printers hub, the 3D scanner for beginners guide and the 3D scanner price guide. Also see the 3D scanner for small parts guide and the 3D scanner for car parts guide.

More buying guides

3D Printers ·

What Is the Best 3D Scanner for 3D Printing

A step-by-step guide to choosing a 3D scanner for 3D printing: accuracy, object size, color capture and file formats, with figures from current scanner…

3D Printers ·

Low Cost Handheld 3D Scanner: What to Buy

A low cost handheld 3d scanner turns a real object into a printable model. This guide explains accuracy, object size, tracking, software and exports.