Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Step Bit for Metal (2026): 5 Picks Compared

Five M2 and HSS step bits for sheet metal, stainless steel and aluminum, compared by size range, shank, coating and stated thickness limits.

Best Step Bit for Metal (2026): 5 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Jerax M2 3/16-7/8 inBest OverallJerax M2 3/16-7/8 in9.5/10View on Amazon
  2. 2NEIKO 10174ABest Quick-ChangeNEIKO 10174A9.5/10View on Amazon
  3. 3COMOWARE M2 5-PcBest 5-Piece SetCOMOWARE M2 5-Pc9.4/10View on Amazon
  4. 4Jerax HSS 1/4-2 inBest for Large HolesJerax HSS 1/4-2 in9.4/10View on Amazon

A steel enclosure panel needs a clean round hole for a switch or connector, and a twist bit walks, chatters and leaves a ragged edge. A step bit drills the hole in stages, each step widening the opening while the edge stays smooth. This guide compares the best step bit for metal for sheet metal, stainless steel and aluminum work, using only what each maker lists: steel grade, size range, shank and coating.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Jerax M2 3/16-7/8 in: M2 HSS with vacuum heat treatment and nitride hardening, 12 sizes from 3/16 to 7/8 in, and a stated limit of 12ga / 2.7mm in stainless steel. Check price on Amazon
  • Best Quick-Change NEIKO 10174A: A 1/4 in hex shank that snaps into a quick-change chuck, 10 sizes from 1/4 to 1-3/8 in, and a 135-degree split-point tip. Check price on Amazon
  • Best 5-Piece Set COMOWARE M2 5-Pc: M2 cobalt HSS with an AlTiN coating rated at 67HRC, 5 pieces covering 1/8 to 1-3/8 in, and a stronger 3/8 in shank. Check price on Amazon
  • Best for Large Holes Jerax HSS 1/4-2 in: 10 sizes up to 2 in with a self-starting split-point tip, double straight flutes and a 3/8 in tri-flat shank. Check price on Amazon

Machines on the list

Jerax tools 3/16"-7/8" M2 Step Drill Bit Unibit

Jerax tools 3/16"-7/8" M2 Step Drill Bit Unibit

Jerax tools9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An M2 HSS step bit with 12 marked sizes from 3/16 to 7/8 in, vacuum heat treatment, nitride hardening and a 3/8 in tri-flat shank.

Pros

  • M2 HSS with vacuum heat treatment and nitride surface hardening, rated for stainless steel up to 12ga / 2.7mm
  • 12 marked sizes from 3/16 to 7/8 in, with polished steps and size highlights visible while drilling
  • 3/8 in tri-flat shank locks in a 3-jaw chuck and prevents slippage under load
  • Cuts stainless steel, hardened metal, mild steel, galvanized steel, aluminum, copper, plastic and wood

Cons

  • Largest hole is 7/8 in, so bigger openings need a larger bit
  • No warranty term in the listing
  • Needs appropriate pressure on stainless steel, per the maker
  • Not for sockets or impact drivers; a high-torque impact wrench can chip the edges or crack the bit
NEIKO 10174A Step Drill Bit

NEIKO 10174A Step Drill Bit

NEIKO9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A #4241 HSS step bit with 10 steps from 1/4 to 1-3/8 in, titanium nitride coating and a 1/4 in quick-change hex shank.

Pros

  • 10 sizes from 1/4 to 1-3/8 in, with a 135-degree split-point tip that prevents walking
  • Two-flute spiral design deburrs and expands holes as it drills, and pulls chips up and out
  • 1/4 in hex shank snaps into a quick-change chuck or impact driver with no chuck tightening
  • Titanium nitride coated #4241 HSS, for steel, stainless steel, copper, aluminum, wood and plastic

Cons

  • Single bit only, with no spare if the edge chips
  • No warranty term in the listing
  • No storage case is stated
  • Largest hole is 1-3/8 in, so bigger openings need a larger bit
M2 Step Drill Bit Set, 1/8~1-3/8" 5Pcs 4 Spiral

M2 Step Drill Bit Set, 1/8~1-3/8" 5Pcs 4 Spiral

COMOWARE9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-piece M2 cobalt HSS set with AlTiN coating rated at 67HRC, spiral flutes and an upgraded 3/8 in shank, covering 1/8 to 1-3/8 in.

Pros

  • M2 cobalt HSS with an AlTiN coating rated at 67HRC for heat, wear and corrosion resistance
  • Spiral flute design, precision-machined to reduce walking; the maker claims up to 3x faster drilling
  • Upgraded 3/8 in shank for a stronger grip and better torque resistance under heavy drilling pressure
  • Five pieces covering 1/8 to 1-3/8 in, for sheet metal, electrical boxes, metal plates and plastic panels

Cons

  • Limited by its maker to mild steel up to 1/8 in and stainless steel up to 1mm
  • Needs cutting oil or coolant during continuous operation
  • No warranty term in the listing
  • No storage case is stated
Jerax tools 1/4" - 2" HSS Step Drill Bit Unibit

Jerax tools 1/4" - 2" HSS Step Drill Bit Unibit

Jerax tools9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An HSS step bit with 10 marked sizes from 1/4 to 2 in, double straight flutes and a self-starting split-point tip.

Pros

  • Largest range here: 10 sizes from 1/4 to 2 in
  • Self-starting, non-walking split-point tip; no pilot hole is required
  • Polished steps and size highlights let you see the target size while drilling
  • 3/8 in tri-flat shank locks in a 3-jaw chuck and prevents slippage under load

Cons

  • Lists iron, aluminum, copper, plastic and wood, with no mention of stainless steel
  • Plain HSS with no stated coating or hardening treatment
  • No warranty term in the listing
  • Not for sockets or impact drivers; a high-torque impact wrench can chip the edges or crack the bit
5PCS Titanium Step Drill Bit

5PCS Titanium Step Drill Bit

SEDIANAS9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-piece HSS set with a titanium coating, 50 sizes from 3/16 to 1-3/8 in, a 135-degree split-point tip and a storage case.

Pros

  • 50 sizes across 5 pieces, from 3/16 to 1-3/8 in, the most sizes in this guide
  • 135-degree split-point tip with a spiral dual-flute design for self-centering and faster chip clearing
  • Titanium coating rated by the maker as heat, corrosion and rust resistant
  • Storage case included, with clear size markings on each bit

Cons

  • Not recommended for stainless steel or any harder metal, per the maker
  • No warranty term in the listing
  • No shank size is stated
  • Plain HSS body with no M2 or cobalt grade stated

Other machines to compare

Specs compared

Model HQ Score Steel Size range Sizes Shank Coating Warranty
Jerax M2 3/16-7/8 in 9.5/10 M2 HSS 3/16 to 7/8 in 12 3/8 in tri-flat Nitride hardened Not stated
NEIKO 10174A 9.5/10 #4241 HSS 1/4 to 1-3/8 in 10 1/4 in hex quick-change Titanium nitride Not stated
COMOWARE M2 5-Pc 9.4/10 M2 cobalt HSS 1/8 to 1-3/8 in Not stated 3/8 in AlTiN, 67HRC Not stated
Jerax HSS 1/4-2 in 9.4/10 HSS 1/4 to 2 in 10 3/8 in tri-flat Not stated Not stated
SEDIANAS 5-Pc 9.4/10 HSS 3/16 to 1-3/8 in 50 Not stated Titanium Not stated

We give each product’s specs as its manufacturer rates them; listings read 18 November 2026.

How the bits are scored

Each bit is scored out of 10 on performance, build, value, safety and warranty, using the weights on the How We Pick page. No listing here states a warranty term or a safety certification, so those two criteria score nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Jerax M2 3/16-7/8 in 9.5 30 21 21 0 0
NEIKO 10174A 9.5 29 20 21 0 0
COMOWARE M2 5-Pc 9.4 29 21 19 0 0
Jerax HSS 1/4-2 in 9.4 28 20 20 0 0
SEDIANAS 5-Pc 9.4 27 19 20 0 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.

Buying guide: best step bit for metal

Match the bit to the metal

Stainless steel is the dividing line. The Jerax M2 bit is rated by its maker for stainless steel up to 12ga / 2.7mm thick, and the NEIKO and COMOWARE bits also list stainless steel, with COMOWARE limiting stainless to 1mm thick. The SEDIANAS set is not recommended for stainless steel or harder metal, and the large Jerax HSS bit lists iron, aluminum, copper, plastic and wood.

Size range and step count

A step bit drills each of its marked sizes, so a single bit can replace a whole index of twist bits. The SEDIANAS set covers 50 sizes from 3/16 to 1-3/8 in across 5 pieces, the Jerax M2 bit covers 12 sizes from 3/16 to 7/8 in, the NEIKO covers 10 sizes from 1/4 to 1-3/8 in, and the large Jerax bit covers 10 sizes from 1/4 to 2 in.

Shank and chuck fit

The shank decides which drill holds the bit. Each Jerax bit uses a 3/8 in tri-flat shank that locks in a 3-jaw chuck of 3/8 in (10mm) or larger capacity, the NEIKO uses a 1/4 in hex shank that snaps into a quick-change chuck or impact driver, and the COMOWARE set uses an upgraded 3/8 in shank. The SEDIANAS listing states no shank size. The drill bit shank types guide explains the fits in more detail.

Coating and steel grade

The Jerax M2 bit adds vacuum heat treatment and nitride hardening, and the COMOWARE set uses M2 cobalt HSS with an AlTiN coating the maker rates at 67HRC. The NEIKO is #4241 HSS with a titanium nitride coating, and the SEDIANAS set is HSS with a titanium coating.

Cutting oil and speed

COMOWARE is the only maker here to state a method: apply cutting oil or coolant during continuous operation, start at a slower speed for better control, then increase speed gradually, and avoid excessive feed pressure or forcing the bit when it gets stuck.

Safety

Clamp the work before drilling, wear eye protection, and keep hands clear of the bit. On steel, use cutting oil and let the bit cut at its own pace; forcing it builds heat and can chip the edge or crack the bit.

Project Match

Match the bit to the project:

  • Stainless steel panels and brackets: the Jerax M2 bit, rated for stainless steel up to 12ga / 2.7mm.
  • Large holes for vents and cable glands: the Jerax HSS bit, with sizes up to 2 in.
  • Electrical boxes and plates in mild steel: the COMOWARE set, limited to mild steel up to 1/8 in and stainless steel up to 1mm.
  • Fast bit swaps on a job: the NEIKO bit, with a 1/4 in hex shank for a quick-change chuck.
  • Many sizes for aluminum, iron and plastic: the SEDIANAS set, with 50 sizes and a storage case.

FAQ: lasers and CNC

How do you use step drill bits?

Center the split-point tip on the mark and drill at a slow speed, letting each step widen the hole to the marked size. The polished steps and size highlights on each Jerax bit show the target size while drilling. On steel, COMOWARE advises cutting oil or coolant, a slow start, and no forcing the bit.

Do step drill bits work on metal?

Yes, when the maker lists the metal. The bits here list stainless steel, mild steel, galvanized steel, aluminum, copper and iron, and the Jerax M2 bit is rated for stainless steel up to 12ga / 2.7mm thick. The SEDIANAS set is the exception: its maker says it is not recommended for stainless steel or harder metal.

Are step drill bits good for metal?

For sheet metal they are a strong match: a single bit drills many hole sizes, the stepped edge deburrs as it goes, and the split-point tip stops the bit walking. The limit is thickness and hardness. COMOWARE limits its set to mild steel up to 1/8 in and stainless steel up to 1mm, while the Jerax M2 bit is rated for stainless steel up to 12ga / 2.7mm.

Who makes the best step drill bits?

Among the listings here, Jerax tools leads on stated specs: its M2 bit pairs vacuum heat treatment and nitride hardening with a stainless rating up to 12ga / 2.7mm, and its large HSS bit covers sizes up to 2 in. NEIKO and COMOWARE sit close behind on steel grade and coating.

Why are step drill bits so expensive?

The listings point to the materials and work in the bit: M2 HSS with added tungsten and molybdenum, cobalt steel, titanium nitride and AlTiN coatings, vacuum heat treatment and nitride hardening, and precision-machined spiral flutes. A single bit also replaces many single-size bits: the SEDIANAS set covers 50 sizes.

Related: drill bit types for metal, best drill bits for hardened steel, best drill bit for stainless steel, best metal drill bit and the CNC tooling hub. Also see the drill bit shank types guide.

More buying guides