Best Professional Drill Bit Sharpener for Metal (2026)
5 electric sharpeners for steel, masonry, carbide and coated bits, compared by bit range, point angle, wheel and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDrill Doctor 750X9.7/10View on Amazon - 2
Best WarrantyANGLE BEAST 750X9.6/10View on Amazon - 3
Best Compact PickDrill Doctor 350X9.5/10View on Amazon - 4
Best for Metric BitsAR MR-13A9.5/10View on Amazon
A dull drill bit does not cut, it rubs. It wanders off the mark, burns the edge of the hole and leaves a ragged finish on steel that should have come out clean. A best professional drill bit sharpener for metal puts a fresh point back on the bits already in the index, so a workshop stops throwing away bits that still have life in them. This guide compares electric sharpeners for steel, masonry, carbide and coated bits, by bit range, point angle, wheel and warranty, using only what each listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Drill Doctor 750X: Widest range here at 3/32 to 3/4 inch, 115 to 140 degree angles, split points and a preinstalled 180 grit diamond wheel, with 3 years of warranty. Check price on Amazon
- Best Warranty ANGLE BEAST 750X: 5-year warranty, a diamond wheel plus one spare, a practice bit and a 92W motor, with the same 3/32 to 3/4 inch range as the top pick. Check price on Amazon
- Best Compact Pick Drill Doctor 350X: 2.33 pounds and 4.5 x 6.75 x 12.5 inches, with simplified chuck alignment and V Block jaws for smaller bits. Check price on Amazon
- Best for Metric Bits AR MR-13A: 13 collets cover 3 to 15 mm bits, with 95 to 135 degree angles and a cubic boron nitride wheel. Check price on Amazon
Machines on the list

Drill Doctor 750X Drill Bit Sharpener
A 3/32 to 3/4 inch electric sharpener with 115 to 140 degree point angles, split point sharpening and a preinstalled 180 grit diamond wheel.
Pros
- Sharpens standard twist and masonry bits from 3/32 to 3/4 inch, the widest range in the Drill Doctor lineup
- Point angles adjust from 115 to 140 degrees to match the bit to the material
- Creates or restores split points, with a Push to Stop port that helps prevent over splitting
- Preinstalled 180 grit diamond wheel, 3/4 inch chuck, carrying and storage bag, wheel hub wrench and 6 foot power cord
Cons
- Adjustable point angles add setup steps before each sharpening session
- No stated wheel life, and a replacement wheel is not listed as included
- No stated dust collection or cover for the grinding area

750X Electric Drill Bit Sharpener for 3/32"-3/4"
A 3/32 to 3/4 inch electric sharpener with 115 to 140 degree angles, a diamond wheel plus a spare, a practice bit and a 5-year warranty.
Pros
- Sharpens 3/32 to 3/4 inch rotary drill bits at 115 to 140 degree adjustable angles
- Pre-installed diamond wheel plus one complimentary spare wheel
- Practice drill bit included, with videos and user manuals for setup
- 5-year warranty and a 92W PM motor that holds steady RPM under load
Cons
- Not for 4-blade bits, per the listing
- No stated weight or dimensions
- The 750X name matches the Drill Doctor model name, so confirm the brand before ordering
- No stated wheel life beyond the spare in the box

Drill Doctor 350X Electric Drill Bit Sharpener
A 3/32 to 1/2 inch electric sharpener for steel, masonry, carbide and coated bits, with simplified chuck alignment and a 3-year warranty.
Pros
- Sharpens standard twist and masonry bits from 3/32 to 1/2 inch
- On Chuck Alignment simplifies setup, and V Block chuck jaws help prevent twisting on smaller bits
- Grinds high speed steel, masonry, carbide and TiN coated stock
- 2.33 pounds and 4.5 x 6.75 x 12.5 inches, a compact bench footprint
Cons
- Bit range stops at 1/2 inch, below the 3/4 inch range of the 750X models
- No adjustable point angle stated
- No stated wheel type or grit
- No split point feature stated

Drill Bits Sharpener, MR-13A Drill bit Grinding
A 3 to 15 mm grinder with 13 elastic collets, 95 to 135 degree point angles, a cubic boron nitride wheel and an all-iron structure.
Pros
- 13 elastic collets cover 3 to 15 mm bits
- Point angle adjusts from 95 to 135 degrees
- Cubic boron nitride wheel, with a stated finish that rivals new bits
- All-iron structure resists deforming over time, and an open-type cover opens for dust cleaning
Cons
- No warranty term stated
- Metric collets only, with no inch sizes stated
- No stated bit materials beyond drill bits generally

Electric Drill Bit Sharpener
A 3-in-1 station that sharpens high speed steel drill bits from 7/64 to 3/8 inch, plus straight-edged knives, scissors, chisels and plane blades.
Pros
- Three modules: drill sharpener, knife and scissor sharpener, chisel and plane sharpener
- Sharpening angle adjusts from 15 to 50 degrees
- Chisel and plane blades from 1/4 to 2 inches wide (6 to 51 mm)
- Compact at 6.38 x 5.63 x 6.1 inches and 3.26 lbs, with anti-slip feet
Cons
- Drill range stops at 3/8 inch, the narrowest drill range here
- No warranty term stated
- High-strength engineering plastic body, not metal
Other machines to compare
Drill Doctor 500X Drill Bit Sharpener for 3/32 to 1/2 InchCheck price on Amazon
Multi-Sharp 2001 Drill Bit SharpenerCheck price on Amazon
Electric Drill Bit Sharpener for 3mm to 12mm Drill BitsCheck price on Amazon
𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 Circular Drill Bit Sharpener for 4-1/2in and 5inCheck price on Amazon
Drill Bit SharpenerCheck price on Amazon
Specs compared
| Model | HQ Score | Bit range | Point angle | Wheel | Warranty |
|---|---|---|---|---|---|
| Drill Doctor 750X | 9.7/10 | 3/32 to 3/4 in | 115 to 140 degrees | 180 grit diamond | 3 years |
| ANGLE BEAST 750X | 9.6/10 | 3/32 to 3/4 in | 115 to 140 degrees | Diamond, plus spare | 5 years |
| Drill Doctor 350X | 9.5/10 | 3/32 to 1/2 in | Not stated | Not stated | 3 years |
| AR MR-13A | 9.5/10 | 3 to 15 mm | 95 to 135 degrees | Cubic boron nitride | Not stated |
| 3-in-1 Sharpener | 9.4/10 | 7/64 to 3/8 in | 15 to 50 degrees | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 12 November 2026.
Most drill bit sharpener listings are light-duty
Most sharpeners in this category are built for a home drawer: a small fixed-angle slot for common bits, a plastic body and no stated wheel. The picks above are the other kind: electric machines with a stated bit range, an adjustable point angle and a named wheel.
Buying guide: best professional drill bit sharpener for metal
Match the range to your index
Start with the largest and smallest bits in the index. The Drill Doctor 750X and the ANGLE BEAST 750X both cover 3/32 to 3/4 inch, the widest range here, while the Drill Doctor 350X stops at 1/2 inch and the 3-in-1 Sharpener stops at 3/8 inch. The AR MR-13A covers 3 to 15 mm with 13 collets, so it suits a metric index.
Point angle matters for metal
Point angle sets how the bit bites. The 750X models adjust from 115 to 140 degrees, the MR-13A from 95 to 135 degrees, and the 3-in-1 Sharpener from 15 to 50 degrees. The 350X states no adjustable angle.
Wheel material and spares
The wheel does the cutting, so its material matters. The Drill Doctor 750X ships with a preinstalled 180 grit diamond wheel. The ANGLE BEAST 750X ships with a pre-installed diamond wheel plus one complimentary spare, the only spare wheel stated in this guide. The MR-13A uses a cubic boron nitride wheel. The 350X and the 3-in-1 Sharpener state no wheel type, so ask the seller before ordering if the wheel matters to the work.
Warranty and support
A warranty is the maker’s promise in writing. The ANGLE BEAST 750X states 5 years, and both Drill Doctor models state 3 years. The MR-13A and the 3-in-1 Sharpener state no warranty term.
Where you will run it
These are bench machines, so plan the space. The 350X measures 4.5 x 6.75 x 12.5 inches and weighs 2.33 pounds. The 3-in-1 Sharpener measures 6.38 x 5.63 x 6.1 inches and weighs 3.26 lbs, per its bullets. The remaining listings state no bench size in their bullets, so measure the bench before ordering. Grinding makes dust and fine metal chips, so keep the area clear and wear eye protection while the wheel runs.
Grinding throws fine chips and dust. Wear eye protection, keep fingers clear of the wheel, unplug the machine before changing a wheel, and clean dust from the work area after each session. Never grind a bit that the listing says the machine does not take.
Project Match
Match the pick to the work, using only what each listing states:
- Steel and masonry bits in a home workshop: Drill Doctor 350X, 3/32 to 1/2 inch, steel, masonry, carbide and TiN coated.
- A full index up to 3/4 inch with split points: Drill Doctor 750X, 115 to 140 degrees, 180 grit diamond wheel.
- Metric bits in a machine shop: AR MR-13A, 3 to 15 mm, 13 collets, 95 to 135 degrees.
- A shared bench that also sharpens knives, scissors, chisels and plane blades: 3-in-1 Sharpener, 7/64 to 3/8 inch for bits, 1/4 to 2 inches for chisels and plane blades.
- A jobsite sharpener with a spare wheel in the box: ANGLE BEAST 750X, diamond wheel plus one spare, 5-year warranty.
How the scores add up
Each sharpener is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Drill Doctor 750X | 9.7 | 32 | 22 | 20 | 5 | 3 |
| ANGLE BEAST 750X | 9.6 | 30 | 21 | 20 | 5 | 4 |
| Drill Doctor 350X | 9.5 | 28 | 20 | 20 | 4 | 3 |
| AR MR-13A | 9.5 | 29 | 21 | 19 | 5 | 0 |
| 3-in-1 Sharpener | 9.4 | 26 | 19 | 19 | 4 | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
FAQ: lasers and CNC
What is a drill bit sharpener?
A drill bit sharpener is an electric machine that grinds a fresh point onto a dull drill bit. It holds the bit at a set angle against a grinding wheel, so the point comes back even and centered instead of ground by hand.
How do drill bit sharpeners work?
The bit goes into a chuck or collet, which holds it at the point angle while a spinning wheel grinds the cutting edges. On the 750X models the angle adjusts from 115 to 140 degrees, and a Push to Stop port on the Drill Doctor 750X helps prevent over splitting. The wheel turns, the bit turns against it, and the dull edge gives way to a fresh one.
What size bits can these sharpeners handle?
It depends on the machine. The Drill Doctor 750X and the ANGLE BEAST 750X take 3/32 to 3/4 inch bits. The Drill Doctor 350X takes 3/32 to 1/2 inch bits. The AR MR-13A takes 3 to 15 mm bits in 13 collets. The 3-in-1 Sharpener takes 7/64 to 3/8 inch bits. Measure the largest bit in the index before choosing.
Are drill bit sharpeners worth it?
For a workshop that dulls bits often, a sharpener earns its place: it turns a dull bit back into a working tool instead of a throwaway. The Drill Doctor 350X listing puts it plainly, saying dull bits get thrown away because resharpening by hand is slow and inconsistent.
Related: CNC tooling, best fiber laser engraver, best enclosed laser engraver, best CO2 laser cutter for home use, best laser engraver for tumblers and the laser engraver hub. Also see our how to start a laser engraving business and how much you can make with a laser engraver.




