Best Matte ABS Filament (2026)
Five matte ABS filaments compared by size, tolerance, print speed, finish and warranty, for functional parts, prototypes and enclosures.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCreality Hyper ABS9.6/10View on Amazon - 2
Best 2kg PackSUNLU ABS 2kg9.6/10View on Amazon - 3
Best Matte FinishIEMAI ABS-CF9.5/10View on Amazon - 4
Best White MatteYUANEANG ABS9.4/10View on Amazon
A bracket that holds its shape, a housing that survives a hot car, a prototype that looks like the finished part: ABS is the filament for functional prints that need heat resistance and toughness. Matte ABS hides layer lines and gives parts an industrial look straight off the bed. This guide covers the best matte abs filament, comparing five spools on size, tolerance, print speed, finish and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Creality Hyper ABS: Up to 350mm/s printing, 19kJ/m² impact strength and a 1-year warranty, for most Creality and high-speed printers. Check price on Amazon
- Best 2kg Pack SUNLU ABS 2kg: 2kg in two 1kg spools with ±0.02mm tolerance and a 1 year manufacturer warranty, for 99% of FDM printers. Check price on Amazon
- Best Matte Finish IEMAI ABS-CF: A 20% carbon fiber ABS with a refined matte black surface and ±0.03mm accuracy, for functional prototypes. Check price on Amazon
- Best White Matte YUANEANG ABS: A 1kg white ABS with a matte-white finish for sanding, smoothing and painting, at ±0.03mm precision. Check price on Amazon
Machines on the list

Creality Hyper ABS Filament 1.75mm, Black, 1-Pack
A 1kg Hyper ABS filament in black that prints at up to 350mm/s with 19kJ/m² impact strength and ±0.05mm dimensional accuracy.
Pros
- Prints at up to 350mm/s without compromising the printing effect
- Impact strength of 19kJ/m², nearly doubled compared to common PLA
- High fluidity and fast cooling formula for high-speed and regular-speed printing
- Releases fewer volatiles during printing and supports open printing
Cons
- ±0.05mm tolerance is the loosest here
- Finish is not stated, so the matte look is not promised
- No nozzle or bed temperature stated in the listing
- Open printing claim rests on the maker's formula, with no stated volatile figures

SUNLU ABS Filament 1.75mm,Black+Black,2kg
A 2kg pack of black ABS filament in two 1kg spools, with ±0.02mm tolerance and a 1 year manufacturer warranty, for 99% of FDM printers.
Pros
- 2kg pack in two 1kg spools, more filament per order
- ±0.02mm diameter tolerance for high precision work
- Nozzle 250-260℃, bed 80-100℃, speed 40-60mm/s, retraction 5mm at 50mm/s
- 1 year manufacturer warranty with a professional support team
Cons
- Enclosure recommended during printing
- No matte finish stated in the listing
- This pack is black only; other colors are separate

OVERTURE ABS High Strength 3D Printer Filament
A 1kg black ABS filament with ±0.02mm accuracy and a glossy finish, made for functional prototypes, automotive parts and enclosures.
Pros
- ±0.02mm dimensional accuracy with a CCD measuring system
- 1kg (2.2lbs) spool with a grid layout, length and weight gauge and viewing hole
- 1-year warranty, plus a 1-year shelf life for unopened spools
- Low warping with excellent durability and high-temperature resistance
Cons
- Glossy finish, not matte, so it does not match the matte look
- No print speed stated in the listing
- No nozzle or bed temperature stated in the listing
- Shelf life applies only to unopened spools with proper storage

IEMAI ABS-CF Carbon Fiber 3D Printer Filament
A 1kg matte black ABS-CF filament reinforced with 20% chopped carbon fiber, with ±0.03mm accuracy and a refined matte surface for functional prototypes.
Pros
- 20% chopped carbon fiber for stiffness, strength-to-weight and dimensional stability
- Refined matte black surface with reduced visible layer lines
- ±0.03mm dimensional accuracy with strong interlayer adhesion and minimal warping
- Dry at 70°C for 7-10 hours, then print at nozzle 250-280°C and bed 80-100°C
Cons
- No warranty term in the listing
- Needs a 0.4-0.6 mm hardened steel or carbide nozzle
- Enclosed chamber recommended for high-precision functional parts
- Dry the filament for 7-10 hours before printing

YUANEANG ABS 3D Printer Filament 1.75mm White
A 1kg white ABS filament with a matte-white finish and ±0.03mm precision, made for brackets, housings and prototypes that need sanding, smoothing or painting.
Pros
- Matte-white surface, ideal for sanding, smoothing, painting and post-processing
- ±0.03mm dimensional accuracy for smooth extrusion and fewer clogs
- Low warping with better bed adhesion and lower shrinkage
- Nozzle 230-250°C and bed 80-110°C, for Bambu Lab, Prusa, Creality, Anycubic, Elegoo and Sovol
Cons
- No warranty term in the listing
- Enclosure recommended for best results
- No print speed stated in the listing
- White only in this listing
Other machines to compare
SUNLU ABS Filament 1.75mmCheck price on Amazon
Creality ABS Filament 1.75mmCheck price on Amazon
kexcelled Matte ABS Filament 1.75mm BlackCheck price on Amazon
Kexcelled Matte ABS Filament 1.75mm Olive GreenCheck price on Amazon
JUSTMAKER ABS Matte 3D Printer FilamentCheck price on Amazon
Specs compared
| Model | HQ Score | Size | Tolerance | Print speed | Finish | Warranty |
|---|---|---|---|---|---|---|
| Creality Hyper ABS | 9.6/10 | 1kg | ±0.05mm | Up to 350mm/s | Not stated | 1-year |
| SUNLU ABS 2kg | 9.6/10 | 2kg, 2 spools | ±0.02mm | 40-60mm/s | Not stated | 1 year manufacturer |
| OVERTURE ABS | 9.5/10 | 1kg (2.2lbs) | ±0.02mm | Not stated | Glossy | 1-year Warranty |
| IEMAI ABS-CF | 9.5/10 | 1kg | ±0.03mm | 30-200 mm/s | Matte black | Not stated |
| YUANEANG ABS | 9.4/10 | 1kg | ±0.03mm | Not stated | Matte-white | Not stated |
These numbers come straight from each maker’s listing and are rated, not measured by us (11 November 2026). Where a listing contradicts itself, both figures are shown.
What the listings tell you
Five ABS filament listings went into this guide. Three stated a warranty term, all 1-year terms, and none stated a safety certification. Two listings state no print speed, and one of those also states no nozzle or bed temperature. One listing disagrees with itself on pack size, and one glossy filament sits in a matte roundup. Read the title and the bullets, not just the spec table.
Buying guide: the best matte abs filament
Matte or glossy
Matte is the look this guide is about: the IEMAI filament has a refined matte black surface with reduced visible layer lines, and the YUANEANG filament has a matte-white surface made for sanding, smoothing and painting. The OVERTURE filament is the exception here, with a smooth, glossy finish for professional prints. The SUNLU and Creality listings state no finish at all, so their look straight off the bed is not promised.
Tolerance and print speed
Tolerance runs from ±0.02mm on the SUNLU and OVERTURE spools to ±0.03mm on the IEMAI and YUANEANG spools and ±0.05mm on the Creality spool. Print speed runs from 40-60mm/s on the SUNLU spool and 30-200 mm/s on the IEMAI spool to up to 350mm/s on the Creality spool. The OVERTURE and YUANEANG listings state no print speed.
Print settings: nozzle, bed and enclosure
ABS needs heat. Nozzle temperatures here run from 230-250°C on the YUANEANG spool to 250-260℃ on the SUNLU spool and 250-280°C on the IEMAI spool, with bed temperatures from 80-100℃ to 80-110°C. The SUNLU and IEMAI listings recommend an enclosure, and the YUANEANG listing recommends one for best results, while the Creality listing supports open printing. The IEMAI spool also needs drying at 70°C for 7-10 hours and a 0.4-0.6 mm hardened steel or carbide nozzle.
Size and pack count
Sizes here run from 1kg spools to a 2kg pack of two 1kg spools. A 1kg spool suits a maker trying a filament or printing a few parts. The 2kg SUNLU pack suits a maker who prints a lot of ABS and wants two spools at once. Check the pack count in the spec table: the SUNLU pack lists 2 items, the rest list 1.
ABS prints best in an enclosure, and the Creality listing states its formula releases fewer volatiles during printing. Vent the print area, and follow the printer maker’s own ventilation guidance. See 3D printers for the wider setup.
Project Match
- Fast functional prints on a high-speed printer: the Creality Hyper ABS, at up to 350mm/s.
- Bulk printing in black: the SUNLU ABS, 2kg in two 1kg spools.
- Matte carbon fiber prototypes: the IEMAI ABS-CF, with 20% chopped carbon fiber.
- White parts for sanding and painting: the YUANEANG ABS, with a matte-white finish.
- Glossy, precise prototypes: the OVERTURE ABS, with ±0.02mm accuracy and a glossy finish.
How the scores add up
Each filament is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. Safety points come from stated formula features such as fewer volatiles during printing, and warranty points come only from a stated warranty term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Creality Hyper ABS | 9.6 | 32 | 22 | 21 | 3 | 3 |
| SUNLU ABS 2kg | 9.6 | 30 | 21 | 22 | 0 | 3 |
| OVERTURE ABS | 9.5 | 28 | 21 | 20 | 0 | 3 |
| IEMAI ABS-CF | 9.5 | 30 | 22 | 20 | 0 | 0 |
| YUANEANG ABS | 9.4 | 28 | 20 | 20 | 0 | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total.
FAQ: lasers and CNC
What is matte ABS filament?
It is an ABS filament with a matte surface finish, which hides layer lines and gives parts an industrial look. The IEMAI filament has a refined matte black surface with reduced visible layer lines, and the YUANEANG filament has a matte-white surface made for sanding, smoothing and painting.
Does ABS filament need an enclosure?
An enclosure is recommended for ABS. The SUNLU listing recommends an enclosure during printing, the IEMAI listing recommends an enclosed chamber for high-precision parts, and the YUANEANG listing recommends an enclosure for best results. The Creality listing supports open printing.
What nozzle temperature does ABS filament need?
It depends on the filament. The YUANEANG spool lists nozzle 230-250°C, the SUNLU spool lists nozzle 250-260℃, and the IEMAI spool lists nozzle 250-280°C. The Creality and OVERTURE listings state no nozzle temperature.
Can ABS filament print fast?
Yes, on a high-speed printer. The Creality Hyper ABS prints at up to 350mm/s, the IEMAI ABS-CF prints at 30-200 mm/s, and the SUNLU ABS prints at 40-60mm/s. The OVERTURE and YUANEANG listings state no print speed.
Related: the 3D printers hub, 3D printer filament types and 3 D printers for beginners. Also see best heat gun for crafts. Also see best craft knife. Also see best UV resin for crafts. Also see best cutting mat for paper crafts. Also see DTF printer for beginners.




