TPU vs TPE Filament: Which One Should You Buy?
TPU filament suits broad flexible printing, while TPE filament suits resilient basketballs, compared on hardness, settings and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
CC3D TPE Filament 47D Blue 1.75mm 1KG 3D Printer9.4/10View on Amazon - 2
CC3D TPE Filament 47D Black 1.75mm 1KG 3D Printer9.4/10View on Amazon - 3
SUNLU TPU Filament 1.75mm,(1kg,Azure,95a TPU)9.4/10View on Amazon - 4
SUNLU TPU Filament 1.75mm,(1kg,Green,95a TPU)9.4/10View on Amazon
Flexible prints that bend, stretch and bounce back sit at the heart of this comparison, from phone cases and watch bands to seals and sporting gear. Makers who want a soft, resilient material face a choice between two flexible families that look alike on the spool but behave differently in print and in use. This guide to tpu vs tpe filament compares the listings side by side, using hardness, print settings, stated uses and warranty to show where each family fits.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: Pick TPU filament for broad flexible printing, with stated settings for nozzle, bed and speed and a wide range of wearable and protective uses. Pick TPE filament for resilient basketballs, where the listings state high resilience, good adhesion and easy support removal, plus a stated manufacturer warranty. Choose by the project, not by the family name alone.
Machines on the list

CC3D TPE Filament 47D Blue 1.75mm 1KG 3D Printer
A high resilience TPE filament in Blue, at Shore hardness 47D, made for printing airless basketballs.
Pros
- Shore hardness 47D, with high resilience and good toughness
- Stated for printing basketballs, easy to peel off and support
- Good adhesion and high resilience for the printed product
- Stated warranty of 1 year manufacturer
Cons
- No nozzle, bed or print speed settings are stated
- No dimensional accuracy figure is stated
- No safety certification or safety feature is stated
- Stated uses focus on basketballs, with no broader uses stated

CC3D TPE Filament 47D Black 1.75mm 1KG 3D Printer
A high resilience TPE filament in Black, at Shore hardness 47D, made for printing airless basketballs.
Pros
- Shore hardness 47D, with high resilience and good toughness
- Stated for printing basketballs, easy to peel off and support
- Good adhesion and high resilience for the printed product
- Stated warranty of 1 year manufacturer
Cons
- No nozzle, bed or print speed settings are stated
- No dimensional accuracy figure is stated
- No safety certification or safety feature is stated
- Stated uses focus on basketballs, with no broader uses stated

SUNLU TPU Filament 1.75mm,(1kg,Azure,95a TPU)
A flexible thermoplastic polyurethane filament in Azure, at Shore hardness 95A, with stated settings for fast flexible printing.
Pros
- Shore hardness 95A, with wear resistance, oil resistance and good elasticity
- Stated settings: nozzle 210-230°C, bed 50-60°C, speed 80-120mm/s
- Dimensional accuracy of +/- 0.03mm for 1.75mm FDM printers
- Vacuum packaging that keeps the spool moisture-free, per the listing
Cons
- Warranty description gives only 1, with no unit, so no usable term is stated
- No safety certification or safety feature is stated in the listing
- Color choice is limited to the Azure spool in this listing
- No spool dimensions are stated in the spec table for this listing

SUNLU TPU Filament 1.75mm,(1kg,Green,95a TPU)
A flexible thermoplastic polyurethane filament in Green, at Shore hardness 95A, with stated settings for fast flexible printing.
Pros
- Shore hardness 95A, with wear resistance, oil resistance and good elasticity
- Stated settings: nozzle 210-230°C, bed 50-60°C, speed 80-120mm/s
- Dimensional accuracy of +/- 0.03mm for 1.75mm FDM printers
- Vacuum packaging that keeps the spool moisture-free, per the listing
Cons
- No warranty term is stated in the listing
- No safety certification or safety feature is stated in the listing
- Color choice is limited to the Green spool in this listing
- No basketball use is stated for this TPU listing, unlike the TPE listings
Other machines to compare
OVERTURE Upgrade TPU 2.0 High-Speed Filament 1.75mmCheck price on Amazon
Siraya Tech Flex TPU AirCheck price on Amazon
Geeetech TPU Filament 1.75mm Clear BlueCheck price on Amazon
Creality TPU 95A Flexible 3D Printer Filament 1.75mmCheck price on Amazon
ZIRO Fast Color Changing TPU FilamentCheck price on Amazon
SUNLU TPU 95A Flexible 3D Printing Filament 1.75mmCheck price on Amazon
Side by side
| Spec | CC3D TPE 47D Blue | CC3D TPE 47D Black | SUNLU TPU 95A Azure | SUNLU TPU 95A Green |
|---|---|---|---|---|
| HQ Score | 61 | 61 | 59 | 59 |
| Filament | TPE | TPE | TPU | TPU |
| Shore hardness | 47D | 47D | 95A | 95A |
| Diameter | 1.75mm | 1.75mm | 1.75mm | 1.75mm |
| Spool | 1KG | 1KG | 1kg | 1kg |
| Print settings | Not stated | Not stated | Nozzle 210-230°C, bed 50-60°C, speed 80-120mm/s | Nozzle 210-230°C, bed 50-60°C, speed 80-120mm/s |
| Dimensional accuracy | Not stated | Not stated | +/- 0.03mm | +/- 0.03mm |
| Stated uses | Airless basketballs | Airless basketballs | Wear seals, plugs, gaskets, phone cases, watch bands, insoles, drone parts | Wear seals, plugs, gaskets, phone cases, watch bands, insoles, drone parts |
| Size | 21cm x 21cm x 7cm | 21 * 21 * 7CM | Not stated | 7.68 Inches x 2.24 Inches x 7.68 Inches |
| Warranty | 1 year manufacturer | 1 year manufacturer | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 4 November 2026.
TPU vs TPE filament: hardness and feel
The SUNLU TPU listings state a Shore hardness of 95A for flexible thermoplastic polyurethane, with a balance between softness and resilience. The CC3D TPE listings state a Shore hardness of 47D for high resilience TPE, with good toughness. The figures use different Shore scales, so the listings state no common scale for a direct hardness comparison, and neither side is called harder on those figures alone. The SUNLU listings add wear resistance, oil resistance, good elasticity and anti-aging properties, while the CC3D listings add high resilience and good toughness.
Print settings and layer adhesion
Settings separate the sides clearly. The SUNLU listings recommend a nozzle temperature of 210-230°C, a bed temperature of 50-60°C and a printing speed of 80-120mm/s, and claim printing at 3 times fast as ordinary TPU filaments. The CC3D listings state no nozzle, bed or speed settings. Adhesion is claimed on both sides: the SUNLU listings claim excellent layer adhesion and a smooth finish, while the CC3D listings claim good adhesion and a product that is easy to peel off and support.
Stated uses and warranty
Uses are broad on the TPU side and narrow on the TPE side. The SUNLU listings state wear seals, plugs, gaskets, sheets, key ring cases, phone cases, watch bands, insoles, drone parts, wearable devices and protective applications, plus robotics and fashion projects. The CC3D listings state printing basketballs and airless basketballs only. Warranty reverses the pattern: the CC3D listings state a warranty of 1 year manufacturer, the SUNLU Azure listing shows a warranty description of 1 with no unit, and the SUNLU Green listing states no warranty term. No safety certification is stated in any listing here.
Choose TPU filament if
- You want stated settings for nozzle, bed and speed.
- You print varied flexible parts such as phone cases, seals or watch bands.
- You want a stated dimensional accuracy figure of +/- 0.03mm.
Choose TPE filament if
- You want to print airless basketballs with high resilience.
- You want a product that is easy to peel off and support.
- You want a stated warranty of 1 year manufacturer.
For more filament comparisons, see nylon vs tpu filament, petg vs tpu filament and best filament dryer for tpu.
Project Match
- Phone cases, watch bands and insoles: SUNLU TPU examples, which list those uses.
- Wear seals, plugs, gaskets and sheets: SUNLU TPU examples, which list those uses.
- Drone parts and protective wearable uses: SUNLU TPU examples, which list those uses.
- Airless basketballs: CC3D TPE examples, which list that use.
FAQ: lasers and CNC
What separates TPU filament from TPE filament?
TPU here is flexible thermoplastic polyurethane at 95A, with stated settings and broad flexible uses. TPE here is high resilience TPE at 47D, stated for airless basketballs. The hardness figures use different Shore scales, so no direct hardness ranking follows from them.
Can TPU filament print phone cases and watch bands?
Yes, the SUNLU listings state phone cases and watch bands among the uses, with settings of 210-230°C nozzle, 50-60°C bed and 80-120mm/s speed.
Can TPE filament print airless basketballs?
Yes, the CC3D listings state suitability for printing basketballs and airless basketballs, with good adhesion, high resilience and easy support removal.
Which filament lists a warranty?
The CC3D listings state a warranty of 1 year manufacturer. The SUNLU Azure listing shows a warranty description of 1, with no unit. The SUNLU Green listing states no warranty term.
Related: pla vs tpu filament, filament dryer vs dry box and best filament dry box.




