Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Glow in the Dark Pla Under $30 (2026)

5 glow in the dark PLA spools compared by glow color, accuracy, temperatures, speed and warranty.

Best Glow in the Dark Pla Under $30 (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1SUNLU Glow GreenBest OverallSUNLU Glow Green9.7/10View on Amazon
  2. 2AMOLEN Firefly BlueBest Speed RangeAMOLEN Firefly Blue9.6/10View on Amazon
  3. 3YOOPAI 250g BundleBest Multi-ColorYOOPAI 250g Bundle9.5/10View on Amazon
  4. 4ELEGOO Glow GreenBest Nozzle RangeELEGOO Glow Green9.5/10View on Amazon

Glow in the dark prints turn a plain sign, star or toy into a piece that shows after the lights go out. The best glow in the dark pla under 30 is a spool that glows bright after light exposure, prints at a stated temperature and feeds without tangles. We compared the spools by glow color, accuracy, nozzle and bed temperature, print speed and warranty.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

Machines on the list

SUNLU Glow in The Dark PLA Filament, 1KG (2.2lbs)

SUNLU Glow in The Dark PLA Filament, 1KG (2.2lbs)

SUNLU9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 kg white PLA spool that glows green, 1.75 mm with ±0.02 mm accuracy, a 200-210°C nozzle, a 50-65°C bed and a 1 year warranty.

Pros

  • 1 kg spool, 1.75 mm, ±0.02 mm dimensional accuracy
  • Nozzle 200-210°C, bed 50-65°C, speed 50-100mm/s stated
  • 100% neat rate winding that reduces tangles and jams
  • 1 year warranty stated, the longest here

Cons

  • No safety certification stated
  • Spool 8.00 inches wide, so check the holder fits
  • Glow needs light exposure, stronger under UV light
  • White by day, so the glow color shows only in the dark
AMOLEN 3D PLA Printer Filament

AMOLEN 3D PLA Printer Filament

AMOLEN9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 kg firefly blue glow PLA spool, 1.75 mm with ±0.02 mm accuracy, a 190-220°C nozzle, a 50-60°C bed, 50-150mm/s and a 6 month warranty.

Pros

  • 50-150mm/s, the widest speed range here
  • Nozzle 190-220°C and bed 50-60°C stated
  • 0.6 mm optimal nozzle, 0.4 mm compatible
  • 6 month warranty stated

Cons

  • No safety certification stated
  • Glow is best with a UV lamp, 30 minutes for a longer glow
  • 6 month warranty is shorter than the SUNLU green
  • Strong bed adhesion claim with no bed surface named
SUNLU Glow in The Dark PLA Filament, 1KG (2.2lbs)

SUNLU Glow in The Dark PLA Filament, 1KG (2.2lbs)

SUNLU9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 kg white PLA spool that glows blue, 1.75 mm with ±0.02 mm accuracy, a 200-210°C nozzle, a 50-65°C bed and a 50-100mm/s speed.

Pros

  • 1 kg spool, 1.75 mm, ±0.02 mm dimensional accuracy
  • Nozzle 200-210°C, bed 50-65°C, speed 50-100mm/s stated
  • 100% neat rate winding that reduces tangles and jams
  • Glow is stronger under UV light

Cons

  • No warranty term stated
  • No safety certification stated
  • Avoid long exposure to direct sunlight; the color fades
  • Same spool as the green, only the glow color differs
ELEGOO PLA 3D Printer Filament Glow in the Dark

ELEGOO PLA 3D Printer Filament Glow in the Dark

ELEGOO9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 kg glow green PLA spool, 1.75 mm, printing at 190-230°C with a 0.4 mm or larger hardened steel nozzle recommended.

Pros

  • 190-230°C nozzle range, the widest here
  • 0.4 mm or larger hardened steel nozzle recommended
  • Evenly distributed glow particles for uniform brightness
  • Prints with minimal warping, for beginners and pros alike

Cons

  • No accuracy figure stated
  • No bed temperature stated
  • No print speed stated
  • No warranty term stated
SUNLU Glow PLA Filament 1.75mm, 250g Spool Bundle

SUNLU Glow PLA Filament 1.75mm, 250g Spool Bundle

YOOPAI9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A bundle of 4 rolls of 250 g glow PLA in yellow, green, blue and red, 1.75 mm with ±0.02 mm accuracy, for small prints and accent parts.

Pros

  • 4 colors in 250 g spools for small prints
  • 1.75 mm, ±0.02 mm dimensional accuracy
  • Neatly wound for reliable feeding
  • Each spool 140 mm in diameter, 36 mm wide, 53 mm hole

Cons

  • No temperatures stated
  • No print speed stated
  • No warranty term stated
  • Listing is sold under the YOOPAI brand while the title names SUNLU

Other machines to compare

Specs compared

Model HQ Score Glow color Spool Accuracy Nozzle temp Warranty
SUNLU Glow Green 9.7/10 Green 1 kg ±0.02 mm 200-210°C 1 year
AMOLEN Firefly Blue 9.6/10 Blue 1 kg ±0.02 mm 190-220°C 6 months
SUNLU Glow Blue 9.6/10 Blue 1 kg ±0.02 mm 200-210°C Not stated
ELEGOO Glow Green 9.5/10 Green 1 kg Not stated 190-230°C Not stated
YOOPAI 250g Bundle 9.5/10 Yellow, green, blue, red 4 x 250 g ±0.02 mm Not stated Not stated

These numbers come straight from each maker’s listing and are rated, not measured by us (5 November 2026).

What the glow PLA listings tell you

We read 5 glow PLA listings for this guide. 2 state a warranty term, the SUNLU green at 1 year and the AMOLEN at 6 months, and 3 do not. 2 give a full print profile with nozzle, bed and speed, 1 gives a nozzle range only, and 1 gives no temperatures at all. 2 of the 5 are the same SUNLU spool in different glow colors, green and blue.

Buying guide: choosing the best glow in the dark pla under 30

Glow color and charging

Glow PLA holds phosphorescent materials that glow in the dark after absorbing light energy, and the glow is stronger under UV light. The AMOLEN listing says to expose the filament to a UV lamp for 30 minutes to prolong the glow. The SUNLU blue listing warns the other way: avoid long exposure to direct sunlight, since longer exposure fades the color.

Print settings

The SUNLU spools print at a nozzle temperature of 200-210°C, a bed temperature of 50-65°C and a speed of 50-100mm/s. The AMOLEN prints at 190-220°C on the nozzle, 50-60°C on the bed and 50-150mm/s. The ELEGOO prints at 190-230°C with minimal warping, and states no bed temperature and no speed. The YOOPAI bundle states no temperatures and no speed, so check the spool label before you print.

Nozzle wear

Glow particles wear a nozzle, so the listings name hardened steel. The ELEGOO listing recommends a 0.4 mm or larger hardened steel nozzle for extended nozzle life and consistent results. The AMOLEN listing names 0.6 mm as the optimal nozzle size, with 0.4 mm as the compatible size. Check the nozzle size the listing names before you print.

Spool size and winding

The SUNLU, ELEGOO and AMOLEN spools hold 1 kg, or 2.2 lbs, of filament. The YOOPAI bundle holds 4 rolls of 250 g each. The SUNLU spools measure 8.00 inches in diameter and 2.50 inches wide, with a 2.20 inch hub hole, and the listing claims a 100% neat rate that reduces tangles and jams. Each YOOPAI spool measures 140 mm in diameter and 36 mm wide, with a 53 mm center hole, and fits most FDM printers with an external, top-mounted or open spool holder.

Accuracy

The SUNLU, YOOPAI and AMOLEN listings state a dimensional accuracy of ±0.02 mm on 1.75 mm filament. The ELEGOO listing states no accuracy figure, only that its glow particles are evenly distributed for uniform brightness. A stated accuracy figure is worth more than a claim of clean detail, since it can be checked against the spool.

Glow PLA and nozzles

Glow particles wear a nozzle faster than plain PLA. The ELEGOO listing recommends a 0.4 mm or larger hardened steel nozzle for extended nozzle life, and the AMOLEN listing names 0.6 mm as optimal with 0.4 mm as compatible. Check the nozzle size the listing names before you print.

Project Match

  • Signs and stars that glow at night: the SUNLU green or the ELEGOO green, charged under UV light.
  • Small multicolor prints and accent parts: the YOOPAI bundle with 4 colors in 250 g spools.
  • Toys and decorations: the AMOLEN firefly blue or the SUNLU blue, printed at the stated settings.
  • A first glow print: the SUNLU green, with a full print profile and a 1 year warranty stated.

How the scores add up

Each spool is scored on performance, build, value, safety and warranty. Safety points go only to what the listing states: a stated certification or a stated safety feature. None of the 5 spools states a certification, so none earns safety points. Warranty points go only to a stated term: the SUNLU green states 1 year and the AMOLEN states 6 months, and the other 3 state none.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
SUNLU Glow Green 9.7 30 21 21 n/a 2
AMOLEN Firefly Blue 9.6 29 20 21 n/a 1
SUNLU Glow Blue 9.6 30 21 21 n/a 0
ELEGOO Glow Green 9.5 28 19 20 n/a 0
YOOPAI 250g Bundle 9.5 26 19 21 n/a 0

Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.

FAQ: lasers and CNC

How do you charge glow in the dark PLA?

Expose it to light: the phosphorescent materials store light energy and release it in the dark. The listings say UV light gives a stronger glow, and the AMOLEN listing says 30 minutes under a UV lamp prolongs the glowing duration.

What temperature should I print glow PLA at?

The SUNLU spools print at 200-210°C on the nozzle and 50-65°C on the bed. The AMOLEN prints at 190-220°C on the nozzle and 50-60°C on the bed. The ELEGOO prints at 190-230°C on the nozzle. The YOOPAI bundle states no temperatures.

What nozzle should I use for glow PLA?

The ELEGOO listing recommends a 0.4 mm or larger hardened steel nozzle for extended nozzle life. The AMOLEN listing names 0.6 mm as the optimal size, with 0.4 mm as the compatible size.

Does glow PLA fade in sunlight?

The SUNLU blue listing says this type of filament should avoid long exposure to direct sunlight, and that longer exposure fades the color. Keep the spool and the finished print out of direct sun where you can.

How much filament is in each spool?

The SUNLU, ELEGOO and AMOLEN spools hold 1 kg, or 2.2 lbs, each. The YOOPAI bundle holds 4 rolls of 250 g each, in yellow, green, blue and red.

Related: best basic PLA filament with spool, Sunlu PLA vs eSun PLA Basic, Bambu Lab PLA vs Sunlu PLA, Anycubic PLA vs Elegoo PLA, PLA vs PVA filament, silk PLA vs wood PLA, matte PLA vs PLA Plus and the 3D printers hub.

More buying guides