Bambu Lab Pla vs Sunlu Pla: Which One Should You Buy?
Bambu Lab matte spools in Cyan and Pumpkin Orange against SUNLU PLA+ 2.0 bundles, compared on diameter, toughness, speed, spool design and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
SUNLU 4KG Upgrade PLA+2.0 3D Printer Filament9.7/10View on Amazon - 2
SUNLU PLA+ 2.0 Filament 1.75mm, 1KG Spool Bundle9.6/10View on Amazon - 3
Bambu Lab PLA 3D Printer Filament9.6/10View on Amazon - 4
Bambu Lab PLA 3D Printer Filament9.6/10View on Amazon
A spool of PLA starts nearly every print a home maker runs, from signs to brackets handled every day. When the choice comes down to bambu lab pla vs sunlu pla, the sides are not the same kind of product: Bambu Lab sells a matte spool in a named color, while SUNLU sells PLA+ 2.0 bundles built around toughness, with a print speed range stated on the 4KG bundle. This comparison uses only what each listing states, so the pick follows the print.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: pick the SUNLU PLA+ 2.0 4KG bundle for high speed printing, with a 1 year warranty and a 50-600mm/s range. Pick a Bambu Lab matte spool if you want a single 1kg spool in a named color. The 4-roll SUNLU bundle sits between them, with 4 colors and stated AMS fit.
Machines on the list

SUNLU 4KG Upgrade PLA+2.0 3D Printer Filament
A 4-pack of SUNLU PLA+ 2.0 in Black, White, Blue and Red, with a stated 50-600mm/s range, 1.75mm ±0.02mm diameter and a 1 year warranty.
Pros
- Stated print speed range of 50-600mm/s
- 12x higher toughness than standard PLA, per the listing
- 1.75mm ±0.02mm diameter for steady extrusion
- Bambu-compatible spool with a removable inner core
Cons
- Sold as a 4-pack; no smaller pack is stated
- The 12x toughness figure is the maker's claim
- High speed printing is described around the Bambu Lab X1 series
- No stated drying guidance beyond the vacuum seal and desiccant pack

SUNLU PLA+ 2.0 Filament 1.75mm, 1KG Spool Bundle
A 4-roll bundle of SUNLU PLA+ 2.0 in Bone White, Olive Green, Chocolate Brown and Oak Brown, with 1.75mm ±0.02mm diameter and stated AMS fit.
Pros
- 4 colors in 1 bundle: Bone White, Olive Green, Chocolate Brown and Oak Brown
- 1.75mm ±0.02mm diameter for steady extrusion
- Works with Bambu Lab AMS and AMS Lite, per the listing
- Upgraded toughness with reduced brittleness, per the listing
Cons
- No print speed range is stated
- No warranty term is stated
- The listing title says SUNLU while the brand field lists YOOPAI
- No stated drying guidance

Bambu Lab PLA 3D Printer Filament
A 1kg spool of Bambu Lab matte PLA in Cyan, 1.75mm filament for FDM 3D printers, with high tenacity stated in the title.
Pros
- Matte PLA finish, per the title
- High tenacity stated in the title
- Eco friendly stated in the title
- 1.75mm filament on a 1kg spool for FDM 3D printers
Cons
- No diameter tolerance is stated
- No print speed range is stated
- No warranty term is stated
- No stated project types beyond FDM 3D printers

Bambu Lab PLA 3D Printer Filament
A 1kg spool of Bambu Lab matte PLA in Pumpkin Orange, 1.75mm filament for FDM 3D printers, with high tenacity stated in the title.
Pros
- Matte PLA finish, per the title
- High tenacity stated in the title
- Eco friendly stated in the title
- 1.75mm filament on a 1kg spool for FDM 3D printers
Cons
- No diameter tolerance is stated
- No print speed range is stated
- No warranty term is stated
- No stated project types beyond FDM 3D printers
Other machines to compare
Bambu Lab PLA 3D Printer FilamentCheck price on Amazon
SUNLU Silk PLA+ Filament Bundle 1.75mm Multicolor 250gx8Check price on Amazon
SUNLU Filament Refill 1.75mmCheck price on Amazon
Bambu Lab PLA Matte 3D Printer Filament 1.75mm RFID 1kg withCheck price on Amazon
SUNLU 250g PLA Filament Bundle 1.75mmCheck price on Amazon
Bambu Lab PLA Matte Filament 1.75mm 1kg SpoolCheck price on Amazon
Side by side
| Spec | SUNLU PLA+ 2.0 4KG | SUNLU PLA+ 2.0 Bundle | Bambu Lab PLA Cyan | Bambu Lab PLA Orange |
|---|---|---|---|---|
| HQ Score | 70 | 59 | 56 | 56 |
| Filament | PLA+ 2.0, 1.75mm | PLA+ 2.0, 1.75mm | Matte PLA, 1.75mm | Matte PLA, 1.75mm |
| Diameter tolerance | 1.75mm ±0.02mm | 1.75mm ±0.02mm | Not stated | Not stated |
| Print speed | 50-600mm/s | Not stated | Not stated | Not stated |
| Pack | 4 packs, 1KG per spool | 4 rolls, 1KG each | 1 spool, 1kg | 1 spool, 1kg |
| Colors | Black, White, Blue, Red | Bone White, Olive Green, Chocolate Brown, Oak Brown | Cyan (10603) | Pumpkin Orange (10301) |
| AMS fit | Removable core, Bambu-compatible spool | Works with Bambu Lab AMS and AMS Lite | Not stated | Not stated |
| Warranty | 1 year | Not stated | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 5 November 2026.
Bambu Lab Pla vs Sunlu Pla: What Separates the Sides
The split is simple. Bambu Lab sells matte PLA by the 1kg spool, in Cyan and Pumpkin Orange, with high tenacity stated in the title and little else stated. SUNLU sells PLA+ 2.0 in bundles of 4 1KG spools, with upgraded toughness and a 1.75mm ±0.02mm diameter.
Filament and diameter
Both sides print at 1.75mm. The SUNLU bundles state a 1.75mm ±0.02mm diameter; the 4-roll bundle links it to stable flow and clean detail. The Bambu Lab listings state 1.75mm with no tolerance figure. For more on PLA types, see matte PLA vs PLA Plus.
Toughness and print speed
Toughness is where the SUNLU side makes its case. The 4KG bundle claims 12x higher toughness than standard PLA, and the 4-roll bundle claims improved toughness with reduced brittleness. The Bambu Lab titles claim high tenacity with no figure attached, so the listings do not support a direct toughness ranking. Speed is stated only on the SUNLU 4KG bundle, at 50-600mm/s.
Spools, colors and pack size
Bambu Lab sells 1 spool at a time: a 1kg spool in Cyan (10603) or Pumpkin Orange (10301), at 2.2 pounds in each spec table. SUNLU sells bundles: the 4-roll bundle holds Bone White, Olive Green, Chocolate Brown and Oak Brown at 10.4 pounds, and the 4KG bundle holds Black, White, Blue and Red at 8.82 pounds.
AMS fit and spool design
The 4-roll SUNLU bundle states it works with Bambu Lab AMS and AMS Lite, and fits FDM printers using 1.75mm filament, including enclosed spool setups. The 4KG bundle states a Bambu-compatible spool with a removable inner core, and each spool arrives vacuum-sealed with a desiccant pack. Neither Bambu Lab listing states AMS fit or spool features.
Warranty and support
Only 1 listing states a warranty: the SUNLU 4KG bundle, with 1 year in the spec table. The 4-roll SUNLU bundle and both Bambu Lab spools state no warranty term.
Choose the SUNLU PLA+ 2.0 4KG bundle if
- You print at high speed and want the stated 50-600mm/s range.
- You want 4 colors at once: Black, White, Blue and Red.
- A stated 1 year warranty matters to you.
Choose a Bambu Lab PLA spool if
- You want 1 color, Cyan or Pumpkin Orange, with a matte finish.
- You want a 1kg spool rather than a bundle of 4.
- You want the plainest listing of the 4.
Keep PLA dry between prints. The SUNLU 4KG bundle arrives vacuum-sealed with a desiccant pack; the other listings state no drying guidance.
Project Match
- Functional models, toys and prototypes: SUNLU PLA+ 2.0 Bundle.
- Frequently used prints: SUNLU PLA+ 2.0 Bundle, for prints that get handled often.
- High speed prints: SUNLU PLA+ 2.0 4KG, with its stated 50-600mm/s range.
- Matte finish prints in a named color: Bambu Lab PLA Cyan or Bambu Lab PLA Orange.
- Project types for the Bambu Lab spools: Not stated.
FAQ: lasers and CNC
Is SUNLU PLA+ 2.0 tougher than standard PLA?
Yes in claimed terms: the 4KG bundle claims 12x higher toughness than standard PLA, and the 4-roll bundle claims improved toughness with reduced brittleness. The Bambu Lab titles claim high tenacity with no figure.
Does SUNLU PLA+ 2.0 work with Bambu Lab AMS?
The 4-roll bundle states it works with Bambu Lab AMS and AMS Lite, and the 4KG bundle states a Bambu-compatible spool with a removable inner core. Neither Bambu Lab listing states AMS fit.
What diameter are these PLA filaments?
Both sides are 1.75mm. The SUNLU bundles state 1.75mm ±0.02mm; the Bambu Lab listings state 1.75mm with no tolerance figure.
How fast can SUNLU PLA+ 2.0 print?
The 4KG bundle states a 50-600mm/s range and printing at speeds up to 600mm/s. No other listing states a print speed.
Which PLA fits functional models?
The 4-roll SUNLU bundle names functional models, toys and prototypes in its listing, so it is the pick with stated project fit.
Related: matte PLA vs PLA Plus, Bambu Lab PLA vs Elegoo PLA Plus, best PLA filament 1 kg and best filament dry box.




