Best Glow in the Dark Pla 3D Printing Filament (2026)
Five glow in the dark PLA filaments, from 250g four-color packs to 1kg spools, compared on glow effect, accuracy, print speed and the warranty each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallFLASHFORGE Rainbow9.7/10View on Amazon - 2
Best With WarrantyAMOLEN Glow Red9.6/10View on Amazon - 3
Best Multicolor PackFrucindra 4-Pack9.6/10View on Amazon - 4
Four-Color PackYOUSU 4-Pack9.5/10View on Amazon
A print that glows after the lights go out turns a plain model into a night display, a party piece or a Halloween decoration. The best glow in the dark pla 3d printing filament holds a bright charge from sunlight or a UV lamp and feeds smoothly at the settings the listing states. This guide compares five filaments on what each listing states: glow effect, accuracy, print speed, spool size and warranty, so you can match the filament to the models you print.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall FLASHFORGE Rainbow: 500mm/s rated speed, a 310% brightness claim over standard glow materials, glow for 5-100 minutes and +/- 0.02mm accuracy on a 1kg spool. Check price on Amazon
- Best With Warranty AMOLEN Glow Red: The only stated warranty here, 6 month, plus stated print and bed temperatures and a 1.75mm red spool at +/- 0.02mm. Check price on Amazon
- Best Multicolor Pack Frucindra 4-Pack: 4 spools of 250g in green, blue, blue-green and rainbow, PLA+ at 1.75mm and +/- 0.03mm, vacuum sealed with desiccant. Check price on Amazon
- Four-Color Pack YOUSU 4-Pack: 250g x 4 pack in green, blue, purple and rainbow at 1.75mm, vacuum packed with desiccant and 24-hour seller support. Check price on Amazon
Machines on the list

FLASHFORGE Rapid PLA Filament 1.75mm Glow Rainbow
A 1kg glow rainbow PLA spool rated up to 500mm/s, with +/- 0.02mm accuracy and a glow the maker rates at 5-100 minutes.
Pros
- Rated up to 500mm/s, the highest stated speed here
- Glow lasts 5-100 minutes, per the listing
- Maker claims a 310% brightness enhancement over standard glow materials
- 1.75mm diameter at +/- 0.02mm accuracy
Cons
- No warranty term in the listing
- No print or bed temperature in the listing
- Listing states the same figures as the Luminous Melody listing, so color is the only difference
- The 600+ mm/s note applies to many models at variable fill rates, not a rated speed for this spool

AMOLEN Glow in the Dark 3D Printer Filament
A 1kg red glow PLA spool at 1.75mm and +/- 0.02mm, with stated print and bed temperatures and the only stated warranty here.
Pros
- 6 month warranty, the only stated warranty in this guide
- Print temperature 200-220°C and bed temperature 50-60°C stated
- Print speed 50-100mm/s stated
- UV lamp charge for 30 minutes prolongs the glow, per the listing
Cons
- 50-100mm/s is the lowest stated speed here
- Single red color, no multicolor pack
- Glow needs a UV lamp for the strongest effect, per the listing
- No vacuum packaging or desiccant stated in the listing

FLASHFORGE Rapid PLA Filament 1.75mm Luminous
A 1kg luminous melody PLA spool with the same 500mm/s speed and 5-100 minute glow as the rainbow spool, in a different color.
Pros
- Rated up to 500mm/s, the highest stated speed here
- Glow lasts 5-100 minutes, per the listing
- Maker claims a 310% brightness enhancement over standard glow materials
- 1.75mm diameter at +/- 0.02mm accuracy
Cons
- No warranty term in the listing
- No print or bed temperature in the listing
- Listing states the same figures as the Glow Rainbow listing, so color is the only difference
- The 600+ mm/s note applies to many models at variable fill rates, not a rated speed for this spool

Frucindra Glow in The Dark PLA+3D Printer
A 4-spool PLA+ pack, 250g each in green, blue, blue-green and rainbow, at 1.75mm and +/- 0.03mm, vacuum sealed with desiccant.
Pros
- 4 colors in one pack: green, blue, blue-green and rainbow
- PLA+ at 1.75mm with +/- 0.03mm accuracy
- Each spool vacuum sealed with desiccant against moisture
- Green has the strongest luminous effect of the four, per the listing
Cons
- No warranty term in the listing
- No print speed or temperature in the listing
- Glow effect varies by color, with crystal rainbow last, per the listing
- No print speed stated, so high-speed printers have no rated figure to match

YOUSU 3D Printer Filament Bundle
A 250g x 4 pack in green, blue, purple and rainbow at 1.75mm, vacuum packed with desiccant and 24-hour seller support.
Pros
- 4 colors in one pack: green, blue, purple and rainbow
- Vacuum packed with desiccant to keep the filament dry
- Seller support is 24 hours online, per the listing
- No warping, no jamming, no blobs or layer delamination, per the listing
Cons
- Title states +/- 0.03 mm while the bullets state +/- 0.02 mm
- No warranty term in the listing
- No print speed or temperature in the listing
- 250g spools may need an adapter for some printers
Other machines to compare
3DHoJor PLA Glow in The Dark Filament 1.75mm 1KgCheck price on Amazon
Colourbing Glow in The Dark PLA+ 3D Printer FilamentCheck price on Amazon
Colourbing Glow in the Dark PLA+ Filament 1.75mmCheck price on Amazon
iSANMATE 3D Printer Filament Bundle for HalloweenCheck price on Amazon
Tecsonar 3D Printer Filament 1.75mm Glow in Dark ShinyCheck price on Amazon
Specs compared
| Model | HQ Score | Diameter | Spool | Accuracy | Print speed | Colors | Warranty |
|---|---|---|---|---|---|---|---|
| FLASHFORGE Rainbow | 9.7/10 | 1.75 mm | 1 kg | +/- 0.02 mm | Up to 500 mm/s | Glow Rainbow | Not stated |
| AMOLEN Glow Red | 9.6/10 | 1.75 mm | 1 kg | +/- 0.02 mm | 50-100 mm/s | Red | 6 month |
| FLASHFORGE Melody | 9.6/10 | 1.75 mm | 1 kg | +/- 0.02 mm | Up to 500 mm/s | Luminous Melody | Not stated |
| Frucindra 4-Pack | 9.6/10 | 1.75 mm | 4 x 250 g | +/- 0.03 mm | Not stated | Green, blue, blue-green, rainbow | Not stated |
| YOUSU 4-Pack | 9.5/10 | 1.75 mm | 4 x 250 g | +/- 0.03 mm | Not stated | Green, blue, purple, rainbow | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026. Accuracy is the diameter tolerance each listing states.
What the listings tell you, and what they leave out
Only 1 of the 5 listings here states a warranty term, the AMOLEN listing with 6 month. Only the AMOLEN listing states a print temperature and a bed temperature. The FLASHFORGE listings state the same figures for speed, glow and accuracy, and differ only in color and part number.
Treat the brightness claims as the maker claims. Both FLASHFORGE listings claim a 310% enhancement in brightness compared to standard glow-in-the-dark materials, and the Frucindra listing ranks its own colors, with green first and crystal rainbow last.
Buying guide: the best glow in the dark pla 3d printing filament for night prints
Charging the glow
Glow PLA charges under sunlight or a UV lamp. The AMOLEN, Frucindra and YOUSU listings all state 30 minutes of light for the strongest glow, and the AMOLEN listing recommends a UV lamp for the best charge. The FLASHFORGE listings state the glow lasts 5-100 minutes, while the Frucindra listing says the effect lasts for hours and fades over time.
Diameter accuracy
Every spool here is 1.75mm. The AMOLEN and FLASHFORGE listings state +/- 0.02mm accuracy, and the Frucindra listing states +/- 0.03mm. The YOUSU listing contradicts itself: the title states +/- 0.03 mm while the bullets state +/- 0.02 mm, so take the tolerance as unsettled until the maker clears it up.
Print speed and temperature
Only the AMOLEN listing states a full set of settings: a print temperature of 200-220°C, a bed temperature of 50-60°C and a print speed of 50-100mm/s. The FLASHFORGE listings rate speed up to 500mm/s and note that many models reach 600+ mm/s at variable fill rates. The Frucindra and YOUSU listings state no speed and no temperatures, so check the listing before you print.
Spool size and color choice
The AMOLEN and FLASHFORGE picks are 1kg spools in a single color: red for AMOLEN, Glow Rainbow and Luminous Melody for FLASHFORGE. The Frucindra and YOUSU picks are 4-spool packs of 250g each, 1000g in total, in green, blue and rainbow shades with a fourth color each: blue-green for Frucindra and purple for YOUSU. Small spools suit small models and color variety; a 1kg spool suits long single-color prints.
Warranty
Only the AMOLEN listing states a warranty term, 6 month. The other 4 listings state no warranty term, so their warranty score is zero and the ranking comes from performance, build and value.
Print in a ventilated space and keep the printer clear of clutter while it runs. Charge glow prints with sunlight or a UV lamp, and keep the lamp away from eyes and skin while it is on. Store opened spools dry, since moisture hurts print quality.
Project Match
- Night decor and hobby models: AMOLEN red, made for night decor and hobby models with a UV lamp charge.
- Halloween decorations, Christmas ornaments and party pieces: YOUSU 4-pack, listed for glow sticks, figurines, party decoration, Halloween decorations and Christmas ornaments.
- Crafts, art installations and holiday decorations: FLASHFORGE Rainbow and Melody, listed for crafts, art installations and holiday decorations.
- Small models and miniature models in several colors: Frucindra 4-pack, listed for small models and miniature models in a single print.
- Projects that need enhanced nighttime visibility: FLASHFORGE Rainbow and Melody, listed for creative projects that require enhanced nighttime visibility.
How the scores add up
Each filament is scored on performance, build, value, safety and warranty, with the weights published on the method page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| FLASHFORGE Rainbow | 9.7 | 32 | 21 | 21 | n/a | 0 |
| AMOLEN Glow Red | 9.6 | 27 | 20 | 20 | n/a | 2 |
| FLASHFORGE Melody | 9.6 | 30 | 21 | 20 | n/a | 0 |
| Frucindra 4-Pack | 9.6 | 28 | 20 | 20 | n/a | 0 |
| YOUSU 4-Pack | 9.5 | 27 | 19 | 20 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.
FAQ: lasers and CNC
How do I charge glow in the dark PLA?
Expose the filament or the finished print to sunlight or UV light. The AMOLEN, Frucindra and YOUSU listings all state 30 minutes of light for the strongest glow, and the AMOLEN listing recommends a UV lamp for the best charge. Brighter light gives a more vivid glow, per the Frucindra listing.
How long does the glow last?
The FLASHFORGE listings state the glow lasts for up to 5-100 minutes. The Frucindra listing says the luminous effect lasts for hours and fades over time, and that different light sources give different effects. Recharge the print under light when the glow fades.
What print settings should I use for glow PLA?
Use the settings the listing states. Only the AMOLEN listing states them: a print temperature of 200-220°C, a bed temperature of 50-60°C and a print speed of 50-100mm/s. The FLASHFORGE listings rate speed up to 500mm/s with no temperatures, and the Frucindra and YOUSU listings state no settings at all.
Can I print glow PLA on any FDM printer?
The Frucindra and YOUSU listings state compatibility with most FDM 3D printers. The YOUSU listing adds a warning to check whether your printer works with a small 250g spool, and notes that you can print a 250g spool adapter to work with a Bambu AMS printer. The AMOLEN and FLASHFORGE listings state no printer compatibility.
Why do the two FLASHFORGE filaments list the same specs?
Both FLASHFORGE listings state the same figures: 1.75mm diameter, +/- 0.02mm accuracy, a rated speed up to 500mm/s, a glow of 5-100 minutes and a 310% brightness claim over standard glow materials. They differ only in color, Glow Rainbow against Luminous Melody, and in part number, so pick the color you want.
Related: the 3D printers hub, best 3D PLA filament, glow in the dark PLA vs PLA, 3D printer filament types and best 3D printer filament for outdoor use.




