Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Matte PLA vs PLA Plus: Which One Should You Buy?

Two matte PLA spools and a PLA Plus spool from ELEGOO, compared on finish, toughness claims, accuracy, spool size and warranty.

Matte PLA vs PLA Plus: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ELEGOO PLA Plus 3D Printer Filament 1.75mm BlackELEGOO PLA Plus 3D Printer Filament 1.75mm Black9.6/10View on Amazon
  2. 2ELEGOO Matte PLA 3D Printer Filament Navy Blue 1KGELEGOO Matte PLA 3D Printer Filament Navy Blue 1KG9.5/10View on Amazon
  3. 3ELEGOO Matte PLA 3D Printer Filament Matte BlackELEGOO Matte PLA 3D Printer Filament Matte Black9.5/10View on Amazon

A print that will sit on a shelf asks for a different filament than a print that will take a knock in daily use. Matte PLA vs PLA Plus is the choice between a low-gloss finish with layer lines that fade from view and a tougher PLA that the maker pitches at functional parts.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Verdict: pick matte PLA when the look of the finished print matters most: the ELEGOO matte spools promise a low-gloss finish with nearly invisible layer lines. Pick PLA Plus when the print needs to hold up in use: its listing claims higher toughness and impact strength, with low warpage and shrinkage, plus a 30 day guarantee. The matte listings state no toughness figure and no warranty term.

Machines on the list

ELEGOO PLA Plus 3D Printer Filament 1.75mm Black

ELEGOO PLA Plus 3D Printer Filament 1.75mm Black

ELEGOO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A tougher PLA Plus 2 kg pack with a glossy surface, low warpage and shrinkage, and a 30 day guarantee for any quality reasons.

Pros

  • Maker claims enhanced toughness and impact strength, with low warpage and shrinkage
  • Glossy surface with strong layer bonding, per the listing
  • Neatly wound with full mechanical winding and strict manual inspection
  • 30 day guarantee for any quality reasons

Cons

  • No figure is stated for the toughness or warpage claims
  • No printing temperature figure is stated, only that it runs lower
  • Glossy surface, so prints will not have a matte look
  • The 30 day guarantee is a short window
ELEGOO Matte PLA 3D Printer Filament Navy Blue 1KG

ELEGOO Matte PLA 3D Printer Filament Navy Blue 1KG

ELEGOO9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A matte navy blue PLA spool with a low-gloss finish and nearly invisible layer lines, in a 1 kg cardboard spool.

Pros

  • Matte, low-gloss finish with nearly invisible layer lines
  • Neatly wound to prevent tangles and feeding issues
  • Vacuum-sealed packing, made in a dry and dust-free environment
  • Fits most FDM 3D printers, including Neptune, Ender, Kobra and A1 series

Cons

  • Title states +/- 0.02 mm accuracy while the bullets state +/- 0.2 mm
  • No warranty term is stated
  • No toughness or strength claim is stated
  • Enclosed printers need the door kept open, per the listing
ELEGOO Matte PLA 3D Printer Filament Matte Black

ELEGOO Matte PLA 3D Printer Filament Matte Black

ELEGOO9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A matte black PLA twin pack: 2 pcs of 1 kg cardboard spools with a low-gloss finish and nearly invisible layer lines.

Pros

  • Matte, low-gloss finish with nearly invisible layer lines
  • 2 kg of filament across 2 pcs of 1 kg spools
  • Neatly wound to prevent tangles and feeding issues
  • Fits most FDM 3D printers, including Neptune, Ender, Kobra and A1 series

Cons

  • Title states +/- 0.02 mm accuracy while the bullets state +/- 0.2 mm
  • No warranty term is stated
  • No toughness or strength claim is stated

Other machines to compare

Side by side

Spec ELEGOO PLA Plus Black ELEGOO Matte PLA Navy ELEGOO Matte PLA Black
HQ Score 64 55 54
Side PLA Plus Matte PLA Matte PLA
Filament diameter 1.75 mm 1.75 mm 1.75 mm
Accuracy stated +/- 0.02 mm +/- 0.02 mm in the title, +/- 0.2 mm in the bullets +/- 0.02 mm in the title, +/- 0.2 mm in the bullets
Finish Glossy surface Matte, low gloss Matte, low gloss
Spool 2 kg, 2 spools of 1 kg 1 kg spool, 2.2 lb 2 kg, 2 pcs of 1 kg spools
Strength claim Tougher and stronger, higher toughness and impact strength Not stated Not stated
Warpage Low warpage and shrinkage Not stated Not stated
Enclosed printer Not stated Keep the door open Keep the door open
Warranty 30 day guarantee for any quality reasons Not stated Not stated

Specs are what each manufacturer publishes as its rating on the listing, collected 5 November 2026.

Matte PLA vs PLA Plus: finish and strength

The clearest split between the sides is the finish. The matte listings promise a matte, low-gloss and smooth finish, with layer lines that stay nearly invisible on the finished print. The PLA Plus listing promises the opposite look: a glossy surface, with accurate deposition and strong layer bonding that bring a smoother finish without layer delamination issues.

Strength is where the PLA Plus listing makes its case. ELEGOO claims enhanced toughness and impact strength for PLA Plus, with low warpage and shrinkage, and pitches it at functional parts. The matte listings make no toughness claim at all, so the listings give no direct strength comparison.

Diameter and accuracy

All 3 listings run 1.75 mm filament, with neat winding and vacuum-sealed packing. The PLA Plus listing is consistent, stating +/- 0.02 mm in the title and the bullets. The matte listings are not: each title states +/- 0.02 mm while the bullets state +/- 0.2 mm, so the stated tolerance is unclear from the listing alone.

Spools and sizes

The matte navy listing is a 1 kg cardboard spool, listed at 2.2 lb. The matte black listing is a 2 kg pack of 2 pcs of 1 kg cardboard spools. The PLA Plus listing is a 2 kg pack of 2 spools of 1 kg. All 3 listings fit most FDM 3D printers, with the matte listings naming Neptune, Ender, Kobra and A1 series printers.

Enclosed printers and everyday printing

The matte listings carry one printing note the PLA Plus listing does not: when you print matte PLA in an enclosed printer, keep the door open. The PLA Plus listing states no enclosed-printer guidance, and it adds a claim of its own, that a lower printing temperature makes it very easy to print, without stating a temperature figure.

Support and warranty

The PLA Plus listing states a 30 day guarantee for any quality reasons. The matte listings state no warranty term: the word guarantee in their bullets covers diameter accuracy, not a warranty.

Choose matte PLA if

  • You want a low-gloss finish with nearly invisible layer lines.
  • The look of the finished surface matters more than a stated toughness figure.
  • You can keep the door open when printing in an enclosed printer.

Choose PLA Plus if

  • You print functional parts and want the tougher PLA claim.
  • You want a glossy surface with strong layer bonding.
  • A stated 30 day guarantee matters to you.

Project Match

  • Prints where a matte, low-gloss finish and nearly invisible layer lines matter: ELEGOO Matte PLA Navy or ELEGOO Matte PLA Black.
  • Functional parts, where the maker claims higher toughness and impact strength: ELEGOO PLA Plus Black.
  • Everyday prints on most FDM 3D printers: any of the 3 listings.
  • Prints in an enclosed printer: the matte listings state to keep the door open; the PLA Plus listing states no enclosed-printer guidance.

FAQ: lasers and CNC

Is matte PLA weaker than PLA Plus?

The listings do not answer that directly. The PLA Plus listing claims enhanced toughness and impact strength, while the matte listings state no toughness figure, so there is no shared figure to compare.

Can I print matte PLA in an enclosed printer?

Yes, with the door open: the matte listings state to keep the door open in an enclosed printer. The PLA Plus listing states no enclosed-printer guidance.

What diameter are these filaments?

All 3 listings state 1.75 mm filament for most FDM 3D printers.

Does PLA Plus have a warranty?

The PLA Plus listing states a 30 day guarantee for any quality reasons. The matte listings state no warranty term.

Which finish does each filament give?

The ELEGOO matte listings promise a matte, low-gloss and smooth finish with nearly invisible layer lines. The ELEGOO PLA Plus listing promises a glossy surface.

Related: Elegoo matte PLA vs Sunlu PLA matte, PETG vs PLA Plus, Bambu Lab PLA vs Elegoo PLA Plus and best PLA filament 1 kg.

More buying guides