Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Petg Filament Glow in the Dark (2026): 4 Picks

Four glow in the dark PETG filaments, from a 1KG single-color spool to a 4kg four-color bundle, compared by colors, accuracy and print settings.

Best Petg Filament Glow in the Dark (2026): 4 Picks
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1SUNLU PETG Glow 4kgBest OverallSUNLU PETG Glow 4kg9.7/10View on Amazon
  2. 2ACESAY Glow PETG 6-PackBest Color ChoiceACESAY Glow PETG 6-Pack9.6/10View on Amazon
  3. 3AMOLEN PETG Glow GreenBest Single SpoolAMOLEN PETG Glow Green9.6/10View on Amazon
  4. 4Colourbing PETG 4-PackBest SamplerColourbing PETG 4-Pack9.5/10View on Amazon

Glow in the dark prints turn a plain part into something people notice after the lights go out: party decorations, night-visible markers, Halloween pieces and gifts that keep glowing on a shelf. PETG adds toughness to that glow, with better impact resistance and less brittleness than standard PLA, per the listings here. This guide compares the best petg filament glow in the dark options on the numbers each listing states: colors, spool size, dimensional accuracy and print settings.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall SUNLU PETG Glow 4kg: 4kg in 4 glow colors, +/- 0.02mm, with stated nozzle and bed temps Check price on Amazon
  • Best Color Choice ACESAY Glow PETG 6-Pack: 6 colors in 200g spools, 1200g total, with stated print temps Check price on Amazon
  • Best Single Spool AMOLEN PETG Glow Green: 1KG glow green spool at +/- 0.02mm, with a stated 30-minute UV charge Check price on Amazon
  • Best Sampler Colourbing PETG 4-Pack: 4 x 250g spools, pre-dried, moisture under 0.3% Check price on Amazon

Machines on the list

SUNLU PETG Glow in Dark Filament,4kg

SUNLU PETG Glow in Dark Filament,4kg

SUNLU9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4kg bundle of glow in the dark PETG in blue, green, red and yellow, 1.75mm at +/- 0.02mm.

Pros

  • 4kg bundle in four glow colors: blue, green, red and yellow
  • Stated nozzle 245-260°C and bed 70-80°C, with print speed 50-200mm/s
  • Dimensional accuracy of +/- 0.02mm stated
  • Larger inner spool diameter makes unwinding easier, per the listing

Cons

  • No warranty term is stated on the listing
  • Four 1kg spools is a lot of filament for a single small project
  • One bullet spells a heading 'Pecfect'
  • The listing states no moisture or drying guidance
ACESAY Glow in the Dark PETG Filament

ACESAY Glow in the Dark PETG Filament

ACESAY9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-pack of 200g glow PETG spools in 6 colors, 1.75mm at +/- 0.03mm.

Pros

  • 6 colors in 200g spools: blue, yellow, green, red, purple and rainbow
  • Stated nozzle 220-250°C and bed 60-100°C, with mild fan cooling
  • Each mini spool is pre-dried and vacuum-sealed with a desiccant pack
  • Glow green and glow blue lead in peak brightness, per the listing

Cons

  • No warranty term is stated on the listing
  • Accuracy of +/- 0.03mm is looser than the +/- 0.02mm stated on the SUNLU and AMOLEN listings
  • Compact 200g mini spools need an external spool holder or adapter on Bambu AMS systems
  • Glow varies by color: yellow, red and purple give warm ambient glows rather than peak brightness
AMOLEN PETG 3D Printer Filament 1.75mm Glow

AMOLEN PETG 3D Printer Filament 1.75mm Glow

AMOLEN9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1KG spool of glow green PETG, 1.75mm at +/- 0.02mm, for most FDM printers.

Pros

  • Dimensional accuracy of +/- 0.02mm stated
  • 1KG single-color spool for a green glow project
  • A 0.4-0.6 mm nozzle is recommended, per the listing
  • Charge guidance stated: about 30 minutes under a UV lamp or strong light

Cons

  • No nozzle or bed temperature is stated; start with the printer's PETG profile
  • Only one color in this listing: glow green
  • No warranty term is stated on the listing
  • Glow intensity and duration vary with light source, charging time, model thickness and conditions
Colourbing Pre-Dried PETG Glow in the Dark

Colourbing Pre-Dried PETG Glow in the Dark

Colourbing9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Four 250g spools of pre-dried glow PETG in green, blue, yellow and purple, 1KG total.

Pros

  • 4 x 250g spools in four colors, for sampling without full-size spools
  • Pre-dried before packaging, vacuum-sealed with desiccant
  • Moisture content under 0.3% stated
  • Mechanically wound and inspected, per the listing

Cons

  • No dimensional accuracy is stated on the listing
  • No nozzle or bed temperature is stated on the listing
  • No warranty term is stated on the listing

Other machines to compare

Specs compared

Model HQ Score Size Colors Accuracy Nozzle Bed Weight
SUNLU PETG Glow 4kg 9.7/10 4 kg, 4 x 1 kg Blue, Green, Red, Yellow +/- 0.02 mm 245-260°C 70-80°C 8.82 lb
ACESAY Glow PETG 6-Pack 9.6/10 1200 g, 6 x 200 g Blue, Yellow, Green, Red, Purple, Rainbow +/- 0.03 mm 220-250°C 60-100°C 2.65 lb
AMOLEN PETG Glow Green 9.6/10 1 kg Green +/- 0.02 mm Not stated Not stated 2.2 lb
Colourbing PETG 4-Pack 9.5/10 1 kg, 4 x 250 g Green, Blue, Yellow, Purple Not stated Not stated Not stated Not stated

We give each product’s specs as its manufacturer rates them; listings read 11 November 2026.

What the listings tell you, and what they leave out

SUNLU and ACESAY state nozzle and bed temperatures; AMOLEN tells the reader to start with the printer’s PETG profile, and Colourbing states no print temperatures at all. No listing here states a warranty term. The Colourbing spec table lists an item weight of 0.00220462262 pounds and dimensions of 0.39 inches on each side, which cannot describe a 1KG bundle of four 250g spools, so trust the title and bullets instead.

Buying guide: best petg filament glow in the dark

Glow color and brightness

SUNLU offers four glow colors, blue, green, red and yellow, while Colourbing offers green, blue, yellow and purple, AMOLEN offers glow green alone, and ACESAY offers 6 colors including rainbow. Glow brightness and duration vary with color, light exposure and printed wall thickness, per the Colourbing listing, and ACESAY says glow green and glow blue lead in peak brightness. Charge finished prints under sunlight or UV light before use for the best effect.

Print settings: nozzle and bed

SUNLU recommends a nozzle temperature of 245-260°C, a bed temperature of 70-80°C and a print speed of 50-200mm/s. ACESAY recommends a nozzle temperature of 220-250°C and a bed temperature of 60-100°C with mild fan cooling. AMOLEN recommends a 0.4-0.6 mm nozzle and says to start with the printer’s PETG profile, then fine-tune temperature, cooling and retraction. Colourbing states no temperatures, only that the filament suits most FDM printers at 1.75mm.

Spool size and sampling

SUNLU sells 4kg as four 1kg spools, ACESAY sells 1200g total as 6 200g spools, Colourbing sells 1KG total as four 250g spools, and AMOLEN sells a single 1KG spool. Small spools let a maker sample several glow colors without buying full 1kg rolls, as the ACESAY and Colourbing listings both note. A full 1kg spool suits a maker who already knows which color a project needs.

Keeping filament dry

Colourbing pre-dries each spool before packaging and vacuum-seals it with desiccant, and states moisture content under 0.3%. ACESAY pre-dries each mini spool and vacuum-seals it with a desiccant pack. AMOLEN says only to keep the filament dry before use. SUNLU states no drying guidance, but notes the larger inner diameter of the spool makes unwinding easier.

Accuracy and feeding

SUNLU and AMOLEN state dimensional accuracy of +/- 0.02mm, while ACESAY states +/- 0.03mm and Colourbing states no accuracy figure. SUNLU says its PETG offers excellent layer adhesion and less stringing, ACESAY says its filament is mechanically spooled for tangle-free feeding, and Colourbing says its filament is mechanically wound and inspected for neat placement on the spool.

Project Match

  • Party and festival decorations that glow at night: SUNLU, with blue, green, red and yellow in a 4kg bundle.
  • Luminous keychains, identification tags and organizers: Colourbing, with four 250g spools in green, blue, yellow and purple.
  • Functional prototypes, organizers and containers: AMOLEN glow green, with PETG toughness and a 1KG spool.
  • Night-visible fishing lures, illuminated tool handles and outdoor camping gear: ACESAY, with 6 colors and stated water resistance and heat resistance.
  • Halloween decorations and personalized gifts: Colourbing and ACESAY, per their listings.

How the scores add up

Each spool is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
SUNLU PETG Glow 4kg 9.7 32 21 21 n/a 0
ACESAY Glow PETG 6-Pack 9.6 30 21 21 n/a 0
AMOLEN PETG Glow Green 9.6 28 20 20 n/a 0
Colourbing PETG 4-Pack 9.5 27 19 20 n/a 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.

FAQ: lasers and CNC

How do you charge glow in the dark PETG?

Expose finished prints to light before display. SUNLU says the filament glows after absorbing light energy and glows better under UV light. AMOLEN says to charge prints under a UV lamp or strong light for about 30 minutes. Colourbing says to charge prints under sunlight or UV light before use.

What nozzle and bed temperatures for glow PETG?

SUNLU recommends 245-260°C at the nozzle and 70-80°C at the bed, with a print speed of 50-200mm/s. ACESAY recommends 220-250°C at the nozzle and 60-100°C at the bed with mild fan cooling. AMOLEN gives no temperatures and says to start with the printer’s PETG profile.

Does glow PETG print on most FDM printers?

Yes, per the listings. All four are 1.75mm filament for most FDM printers. ACESAY names Bambu Lab, Creality, Prusa and AnkerMake, and notes the compact 200g mini spools work best with an external spool holder or a printable spool adapter on Bambu AMS systems. AMOLEN recommends a 0.4-0.6 mm nozzle.

How much filament comes in each pack?

SUNLU sells 4kg as four 1kg spools, ACESAY sells 1200g total as 6 200g spools, Colourbing sells 1KG total as four 250g spools, and AMOLEN sells a single 1KG spool. The small spools suit sampling colors; the 4kg bundle suits a maker printing many glow parts.

Is glow PETG tougher than PLA?

Yes, per the listings. SUNLU says its PETG combines the advantages of PLA and ABS. Colourbing and AMOLEN say PETG offers greater toughness, impact resistance and flexibility than standard PLA, with less brittleness. ACESAY says its PETG has higher impact strength and flexible durability than standard PLA.

Related: the glow in the dark PLA guide, black PETG filament, matte finish PETG filament, eSUN PETG vs SUNLU PETG, silica gel desiccant packs for filament, 3D printing cleaning kit, tools to clean up 3D prints, glow in the dark PLA vs PLA and filament for Christmas ornaments.

More buying guides