Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Silk PLA vs Wood PLA: Which One Should You Buy?

The 4 silk PLA spools in this guide state glossy finishes and 1.75mm diameters, while wood PLA has no listing here, so its details are Not stated.

Silk PLA vs Wood PLA: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1OVERTURE Silk PLA Filament 1.75mmOVERTURE Silk PLA Filament 1.75mm9.7/10View on Amazon
  2. 2ELEGOO PLA 3D Printer Filament 1.75mm 4KG Brown/Beige/WoodELEGOO PLA 3D Printer Filament 1.75mm 4KG Brown/Beige/Wood9.6/10View on Amazon
  3. 3SUNLU Silk PLA+ Filament 1.75mmSUNLU Silk PLA+ Filament 1.75mm9.7/10View on Amazon
  4. 4SUNLU Silk PLA+ Filament 1.75mmSUNLU Silk PLA+ Filament 1.75mmView on Amazon
  5. 5SUNLU 4KG Quadruple Color Silk FilamentSUNLU 4KG Quadruple Color Silk FilamentView on Amazon
  6. 6SUNLU Silk Rainbow PLA FilamentSUNLU Silk Rainbow PLA FilamentView on Amazon
  7. 7SUNLU Silk Triple Color Pla FilamentSUNLU Silk Triple Color Pla FilamentView on Amazon
  8. 8SUNLU 3D Printer Silk FilamentSUNLU 3D Printer Silk FilamentView on Amazon
  9. 9ELEGOO Silk PLA 3D Printer Filament 1.75mm Dual Color BlueELEGOO Silk PLA 3D Printer Filament 1.75mm Dual Color BlueView on Amazon

Silk pla vs wood pla is a choice between two looks for decorative prints. Silk PLA is the glossy side of this comparison: the listings in this guide state glossy finishes, and the SUNLU Silk PLA+ listing names a chrome-like gloss. Wood PLA is the wood-look side of the comparison, but no wood PLA listing is in the data for this article, so its finish, diameter and print settings are Not stated here. The silk side is covered by the 4 silk PLA listings in this guide: they state the finish and the diameter, and two of them state print settings.

Other machines to compare

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Silk PLA vs Wood PLA: the short answer

Pick silk PLA when shine is the point of the print. The SUNLU Silk PLA+ listing describes a glossy, satin-like surface straight from the printer, with no post-processing needed, and the other silk listings describe glossy finishes too. Pick wood PLA when a wood look is the point of the print. No wood PLA listing is in the data for this article, so the table below states the wood PLA side as Not stated wherever a listing would be needed to back a claim.

Detail Silk PLA Wood PLA
Finish Glossy finish stated in the listings Not stated
Diameter 1.75mm stated in the listings Not stated
Print settings Stated in 2 of the 4 listings below Not stated
Spools in this guide 4 silk spools No wood PLA spool in this guide

What silk PLA does well

The silk listings describe glossy finishes for decorative pieces. The SUNLU Silk PLA+ listing describes a natural glossy, satin-like finish straight from the printer, and the ELEGOO listing describes a shiny, glossy finish with dual colors that catch the eye. The SUNLU Silk Rainbow listing adds fast color change, with a new color every 8 meters and 330 meters of filament per spool, so multicolor prints shift hue as they grow.

The silk listings also state practical details. Tolerance is ±0.02mm on the SUNLU spools, the listings state mechanically or neatly wound spools to reduce tangling, and three of the four listings state vacuum-sealed packaging to keep moisture out. The SUNLU Silk PLA+ listing states a reusable spool and compatibility with Bambu Lab, ELEGOO and MarsWork refill filament. The SUNLU Silk Rainbow listing gives spool dimensions: 195mm (7.68 inches) diameter, 57mm (2.24 inches) wide, with a 63mm (2.48 inches) hub hole.

What wood PLA does well

Wood PLA is the wood-look side of this comparison, the alternative to silk PLA’s shine. That contrast is the whole point of this comparison. What this guide cannot do is quote wood PLA settings or spool details, because no wood PLA listing is in the data for this article. Diameter, nozzle temperature, bed temperature and print speed for wood PLA are all Not stated here, so check the wood PLA listing you plan to buy before you print.

The 4 silk PLA spools in this guide

Each entry below states what its listing says, and notes where the listing disagrees with itself.

SUNLU Silk PLA+ Gold. This spool states a 1.75mm diameter, ±0.02mm tolerance and 1kg (2.2lbs) of filament, with a chrome-like gloss finish and a smooth silk texture. Its listing states nozzle temperature 205–215°C, bed temperature 60–80°C and print speed 30–60mm/s, and adds that slower speeds enhance the silky finish. The spool is mechanically wound, vacuum sealed with desiccant and reusable. One detail disagrees with the rest of the listing: the title states 1kg (2.2lbs) while the spec table lists Item Weight 2.6 pounds. The title and bullets win here, so read the spool as a 1kg spool.

SUNLU Silk Rainbow Lilac-Violet. This spool changes color every 8 meters and holds 330 meters of multicolor silk filament at 1.75mm and ±0.02mm tolerance, in a 1kg/2.2lbs spool. Its listing states nozzle temperature 205-235°C, bed temperature 50-60°C and print speed 50-200mm/s, with a glossier-finish tip of nozzle temperature 230°C, outer wall speed 60 mm/s and maximum volumetric speed 8 mm³/s. Its spec table lists a 30-Day warranty description, the only warranty term stated in this guide. Two small notes: the listing warns that colors may change with each roll, so the initial color of each roll may differ from the image; and the title names the color Lilac-Violet while the spec table lists Color as Silk Rainbow 03.

ELEGOO Silk PLA Dual Color Blue Green. This spool states a 1.75mm diameter and 1KG of dual-color filament with a shiny, glossy finish, dried before packaging and sealed in a vacuum bag to keep moisture out. Its listing claims excellent flow, low shrinkage and minimal warping, with no unpleasant odors. One figure disagrees with itself: the title states +/-0.02mm accuracy while the bullets state a tolerance of +/- 0.05 mm. Both figures come from the same listing, so treat the tolerance as unsettled and check the listing again before you buy. No print settings and no warranty term are stated for this spool.

ANYCUBIC Christmas Silk PLA Bundle 4KG. This bundle holds 4 colors, Christmas Green, White, Gold and Red, with 1KG on each reusable spool and a 1.75mm diameter, packed in a gift-ready Christmas box. Its listing names Christmas uses for each color: stockings, candy canes and berry decorations in red; tree ornaments, wreath components and holly leaves in green; star tree toppers, bells and gift bows in gold; snowflakes, snowman bodies and card patterns in white. One figure disagrees with the rest of the listing: the title states a 4KG bundle while the spec table lists Item Weight 0.22 Pounds. The title wins here. No print settings and no warranty term are stated for this bundle.

Settings that differ

The two SUNLU listings tip slower speeds for a glossier finish, but their stated speed ranges differ. The SUNLU Silk PLA+ listing states print speed 30–60mm/s and adds that slower speeds enhance the silky finish; the SUNLU Silk Rainbow listing states print speed 50-200mm/s and gives a glossier-finish tip of nozzle temperature 230°C with outer wall speed 60 mm/s. Nozzle temperature ranges differ too: 205–215°C for the SUNLU Silk PLA+ spool and 205-235°C for the SUNLU Silk Rainbow spool. Bed temperature is 60–80°C on the SUNLU Silk PLA+ listing and 50-60°C on the SUNLU Silk Rainbow listing. The ELEGOO and ANYCUBIC listings state no settings at all, and wood PLA settings are Not stated anywhere in this guide.

Which filament fits your project

  • Artistic models and decorative pieces: SUNLU Silk PLA+ Gold, whose listing names artistic models and decorative pieces and states a glossy, satin-like finish.
  • Multicolor prints that shift hue: SUNLU Silk Rainbow Lilac-Violet, which changes color every 8 meters.
  • Dual-color decorative prints: ELEGOO Silk PLA Dual Color Blue Green, whose listing describes a shiny dual-color finish.
  • Christmas decorations: ANYCUBIC Christmas Silk PLA Bundle 4KG, with 4 colors made for Christmas scenes.
  • Rustic, wood-look prints: wood PLA, which has no spool in this guide, so check a wood PLA listing for its settings before you buy.

Common mistakes to avoid

  • Buying silk PLA when you want a wood look, then finding the shine wrong for the piece.
  • Trusting the ANYCUBIC spec table weight over the title: the title states a 4KG bundle.
  • Trusting the ELEGOO tolerance at face value: the title and the bullets state different figures.
  • Printing the SUNLU Silk PLA+ spool fast when its listing says slower speeds enhance the silky finish.
  • Skipping dry storage: three of the four silk listings state vacuum-sealed packaging with desiccant or dried spools, so keep filament dry between prints.

FAQ: lasers and CNC

Can silk PLA and wood PLA print on the same FDM printer?

The silk listings in this guide state a 1.75mm diameter. The SUNLU Silk Rainbow and ELEGOO listings state compatibility with 1.75mm FDM printers, the SUNLU Silk PLA+ listing names Bambu Lab, ELEGOO and MarsWork refill filament compatibility, and the ANYCUBIC listing states no printer compatibility. Wood PLA has no listing in this guide, so its diameter is Not stated: check the wood PLA listing for its diameter before you buy.

What nozzle temperature do the silk PLA listings state?

The SUNLU Silk PLA+ listing states nozzle temperature 205–215°C and the SUNLU Silk Rainbow listing states 205-235°C. The ELEGOO and ANYCUBIC listings state no nozzle temperature. Wood PLA nozzle temperature is Not stated in this guide.

Does any silk PLA listing in this guide state a warranty?

Yes, one does. The SUNLU Silk Rainbow spec table lists a 30-Day warranty description. The other silk listings in this guide state no warranty term.

Which silk PLA spool changes color as it prints?

The SUNLU Silk Rainbow Lilac-Violet changes color every 8 meters, so a print shifts hue as it grows. The ELEGOO spool is dual color instead: two colors in one spool, with a shiny, glossy finish. The SUNLU Silk PLA+ Gold and the ANYCUBIC bundle state no color change.

Is there a wood PLA spool in this guide?

No. The 4 spools in this guide are all silk PLA, and wood PLA appears only as the comparison side. For wood PLA picks, check a wood PLA listing and compare its stated diameter and settings with the silk figures above.

Related: the matte PLA vs PLA Plus guide, PLA vs wood filament and wood PLA vs marble PLA.

More buying guides