Sunlu PLA vs eSun PLA Basic: Which One Should You Buy?
Two 1 kg PLA spools compared: SUNLU PLA states a +/-0.02mm tolerance and full print settings, while eSUN PLA Basic claims fast printing but states no speed figure.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
SUNLU PLA 3D Printer Filament, Brown, 1KG9.7/10View on Amazon - 2
SUNLU PLA 3D Printer Filament, Green, 1KG9.6/10View on Amazon - 3
eSUN PLA Basic Filament 1.75mm 3D Printer Filament9.5/10View on Amazon - 4
eSUN PLA Basic Filament 1.75mm9.5/10View on Amazon
A fresh spool, a print that has to come out clean, and a shelf of parts waiting to be made: that is the moment behind sunlu pla vs esun pla basic. Both are PLA filaments for FDM 3D printers that promise smooth, tangle-free printing. The difference is what each listing actually states: SUNLU PLA gives a diameter tolerance and full print settings, while eSUN PLA Basic claims fast printing without stating a speed figure. Pick SUNLU PLA for stated settings and a stated tolerance; pick eSUN PLA Basic for fast printing on the named high-speed printers.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: SUNLU PLA is the safer pick for a first spool: both SUNLU listings state a +/-0.02mm diameter accuracy and full print settings, and the brown spool adds a 1 year warranty. eSUN PLA Basic suits a named high-speed printer, with a fast-printing claim but no stated speed figure, temperatures or tolerance figure.
Machines on the list

SUNLU PLA 3D Printer Filament, Brown, 1KG
A 1 kg SUNLU PLA spool in brown with a stated +/-0.02mm tolerance, stated settings, vacuum packaging and a 1 year warranty.
Pros
- Stated +/-0.02mm diameter accuracy on 1.75mm filament
- Full print settings stated: 200-230°C, 50-65°C, 50-100mm/s
- Vacuum packaging and a 1 year warranty stated
- 100% neat rate, no clogs, no bubbles, no tangle
Cons
- No printer models named; compatibility stated as 99%
- Warranty appears only in the spec table, not in the bullets
- No desiccant stated in the vacuum packaging
- Spool size stated in metric only

SUNLU PLA 3D Printer Filament, Green, 1KG
A 1 kg SUNLU PLA spool in green with a stated +/-0.02mm tolerance and stated print settings.
Pros
- Stated +/-0.02mm diameter accuracy on 1.75mm filament
- Full print settings stated: 200-230°C, 50-65°C, 50-100mm/s
- 100% neat rate, no clogs, no bubbles, no tangle
- Spool size stated: 8.00 in diameter, 2.50 in wide
Cons
- No warranty term stated in the listing
- No vacuum packaging stated in the listing
- No printer models named, only almost all 1.75mm FDM printers
- Spool size stated in inches only

eSUN PLA Basic Filament 1.75mm 3D Printer Filament
A 1 kg eSUN PLA Basic spool in white, positioned for fast printing with better fluidity than ordinary PLA.
Pros
- Positioned for fast printing, with better fluidity than ordinary PLA
- Many printers named, including Bambu Lab, K1 and Prusa
- Vacuum-sealed bag with a desiccant bag included
- Low odor, no warping, low shrinkage, no cracking
Cons
- No print speed figure stated, despite the fast-printing claim
- No nozzle or bed temperature stated
- No diameter tolerance figure stated
- No warranty term stated in the listing

eSUN PLA Basic Filament 1.75mm
A 1 kg eSUN PLA Basic spool in blue, the same fast-printing PLA as the white spool.
Pros
- Positioned for fast printing, with better fluidity than ordinary PLA
- Many printers named, including Bambu Lab, Creality K1 and Prusa
- Vacuum-sealed bag with a desiccant bag included
- No bubbles, less stringing, low odor, no warping
Cons
- No print speed figure stated, despite the fast-printing claim
- No nozzle or bed temperature stated
- No diameter tolerance figure stated
- No warranty term stated in the listing
Other machines to compare
SUNLU PLA 3D Printer FilamentCheck price on Amazon
SUNLU PLA+2.0 3D Printer FilamentCheck price on Amazon
SUNLU PLA Plus Filament 1.75mm White 1KGCheck price on Amazon
eSUN PLA Basic Filament 1.75mmCheck price on Amazon
SUNLU 4KG Bundle PLA Matte 1.75mmCheck price on Amazon
SUNLU 1KG PLA Matte 3D Printer Filament 1.75mmCheck price on Amazon
Side by side
| Spec | SUNLU PLA Brown 1KG | SUNLU PLA Green 1KG | eSUN PLA Basic White | eSUN PLA Basic Blue |
|---|---|---|---|---|
| HQ Score | 67 | 60 | 55 | 55 |
| Diameter | 1.75mm, +/-0.02mm | 1.75mm, +/-0.02mm | 1.75mm, no figure stated | 1.75mm, no figure stated |
| Print settings | 200-230°C nozzle, 50-65°C bed, 50-100mm/s | 200-230°C nozzle, 50-65°C bed, 50-100mm/s | Not stated | Not stated |
| Spool | 1 kg, 195mm diameter | 1 kg, 8.00 in diameter | 1 kg spool | 1 kg spool |
| Packaging | Vacuum packaging | Not stated | Vacuum-sealed bag with desiccant | Vacuum-sealed bag with desiccant |
| Warranty | 1 year manufacturer | Not stated | Not stated | Not stated |
| Compatibility | 99% of 3D printers | Almost all 1.75mm FDM 3D printers | Most FDM and high speed printers | Most FDM and high speed printers |
We give each product’s specs as its manufacturer rates them; listings read 6 November 2026.
Sunlu PLA vs eSun PLA Basic: diameter and tolerance
Diameter is where the two sides split. Both SUNLU listings state 1.75mm filament with a +/-0.02mm diameter accuracy. Both eSUN listings state 1.75mm filament with a very tight diameter tolerance, but neither states a figure, so the two sides cannot be compared on tolerance numbers.
Print settings and speed
Both SUNLU listings recommend a nozzle temperature of 200-230°C, a bed temperature of 50-65°C and a printing speed of 50-100mm/s. Neither eSUN listing states a nozzle temperature, a bed temperature or a print speed, though both call the filament a high speed PLA for fast printing. That leaves the speed comparison unclear: the listings give no shared figure.
Spool size and packaging
All four listings are 1 kg spools. The green SUNLU listing states an 8.00 in spool diameter, a 2.50 in width and a 2.20 in hub hole. The brown SUNLU listing states a 195mm spool diameter, a 59mm width and a 63mm hub hole. Neither eSUN listing states spool dimensions. The brown SUNLU listing states vacuum packaging, and both eSUN listings state a sealed vacuum bag with a desiccant bag.
Compatibility
Both sides claim wide compatibility, in different ways. The green SUNLU listing says the filament suits almost all 1.75mm FDM 3D printers, and the brown one states compatibility with 99% of 3D printers. Both eSUN listings name printers, including Bambu Lab, AnkerMake M5, K1 and K1 Max, Voron 2.4, FLSUN V400, Prusa, Ender 3, MakerBot, Flashforge and Raise3D, plus most FDM 3D printers and high speed printers. A named list lets you check a specific model; a percentage does not.
Warranty and support
Only one listing states a warranty: the brown SUNLU listing states a 1 year manufacturer warranty in its spec table; the other three state no warranty term.
Choose SUNLU PLA if
- You want stated print settings: 200-230°C nozzle, 50-65°C bed, 50-100mm/s.
- You want a stated diameter tolerance, +/-0.02mm.
- You want the only stated warranty: 1 year, on the brown spool.
Choose eSUN PLA Basic if
- You print on a named high-speed printer, such as a Bambu Lab, Creality K1 or Voron 2.4.
- You want fast printing with better fluidity than ordinary PLA.
- You want a vacuum-sealed bag with a desiccant bag in the box.
The brown SUNLU listing states vacuum packaging that keeps the filament moisture-free, and both eSUN listings state a sealed vacuum bag with a desiccant bag.
Project Match
- Cultural creativity, animation, and film and television props: eSUN PLA Basic, named for those fields in its listing.
- A first spool with stated settings: SUNLU PLA states a 200-230°C nozzle, a 50-65°C bed and 50-100mm/s.
- Prints where a stated tolerance matters: SUNLU PLA, the only side that states a +/-0.02mm figure.
FAQ: lasers and CNC
Is SUNLU PLA or eSUN PLA Basic better for fast printing?
The listings leave that unclear: eSUN PLA Basic is positioned for fast printing, but neither eSUN listing states a print speed figure, while SUNLU PLA states 50-100mm/s.
What print settings does SUNLU PLA use?
Both SUNLU listings recommend a nozzle temperature of 200-230°C, a bed temperature of 50-65°C and a printing speed of 50-100mm/s.
What diameter tolerance does each filament state?
SUNLU PLA states a +/-0.02mm diameter accuracy on 1.75mm filament. eSUN PLA Basic states a very tight diameter tolerance with no figure.
Which of these filaments states a warranty?
Only the brown SUNLU PLA listing, which states a 1 year manufacturer warranty in its spec table.
Related: Bambu Lab PLA vs SUNLU PLA, Anycubic PLA vs Elegoo PLA, best filament dryer cabinet and the 3D printers hub.




