Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Anycubic PLA vs Elegoo PLA: Which One Should You Buy?

Anycubic PLA and Elegoo PLA+ compared on accuracy, toughness, spool design, feeding and printer compatibility for FDM printers.

Anycubic PLA vs Elegoo PLA: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ELEGOO PLA+ 3D Printer Filament 1.75mm White 1KGELEGOO PLA+ 3D Printer Filament 1.75mm White 1KG9.6/10View on Amazon
  2. 2ANYCUBIC PLA 3D Printer Filament 1.75mmANYCUBIC PLA 3D Printer Filament 1.75mm9.6/10View on Amazon
  3. 3ANYCUBIC PLA 3D Printer Filament 1.75mm, BlackANYCUBIC PLA 3D Printer Filament 1.75mm, Black9.6/10View on Amazon

For makers printing functional parts, prototypes and models, the choice between anycubic pla vs elegoo pla comes down to toughness, spool design and printer compatibility. This comparison puts the Anycubic PLA Grey and Black spools against the Elegoo PLA+ White spool, using what each listing states.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Verdict: the Elegoo PLA+ White is the stronger pick for tougher prints, with stated enhanced toughness and impact strength over standard PLA. The Anycubic Grey and Black spools are the pick for an ACE Pro workflow, with intelligent identification chips and a reusable spool. Each spool states 1.75mm with +/- 0.02mm accuracy, so choose by the print, not the diameter.

Machines on the list

ELEGOO PLA+ 3D Printer Filament 1.75mm White 1KG

ELEGOO PLA+ 3D Printer Filament 1.75mm White 1KG

ELEGOO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A PLA+ filament in white with stated enhanced toughness, 1.75mm diameter, +/- 0.02mm accuracy and a 1KG spool for most FDM printers.

Pros

  • PLA+ with stated enhanced toughness and impact strength over standard PLA
  • 1.75mm diameter with +/- 0.02mm accuracy stated
  • Neatly wound with full mechanical winding and manual inspection stated
  • Glossy surface with strong layer adhesion and low warp and shrinkage stated

Cons

  • No intelligent identification chip is stated
  • No reusable spool is stated
  • No warranty term is stated
  • No drying time is stated, only drying before packaging
ANYCUBIC PLA 3D Printer Filament 1.75mm

ANYCUBIC PLA 3D Printer Filament 1.75mm

ANYCUBIC9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A PLA filament in Texture Grey with intelligent identification chips, 1.75mm diameter, +/- 0.02mm accuracy and a reusable 1KG spool.

Pros

  • Intelligent identification chips for automatic identification with the ACE Pro
  • 1.75mm diameter with +/- 0.02mm accuracy stated
  • Reusable spool with neat winding and a larger spool inner diameter stated
  • Dried for 24 hours before packaging and vacuum sealed with desiccants

Cons

  • Pack count is unclear: a case of 10 packs is stated against a 1KG spool
  • Standard PLA with no enhanced toughness claim stated
  • No warranty term is stated
  • No printing temperature is stated
ANYCUBIC PLA 3D Printer Filament 1.75mm, Black

ANYCUBIC PLA 3D Printer Filament 1.75mm, Black

ANYCUBIC9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A PLA filament in Black with intelligent identification chips, 1.75mm diameter, +/- 0.02mm accuracy and a reusable 1KG spool.

Pros

  • Intelligent identification chips for automatic identification with the ACE Pro
  • 1.75mm diameter with +/- 0.02mm accuracy stated
  • Reusable spool with neat winding and a larger spool inner diameter stated
  • Dried for 24 hours before packaging and vacuum sealed with desiccants

Cons

  • Standard PLA with no enhanced toughness claim stated
  • No warranty term is stated
  • No printing temperature is stated

Other machines to compare

Anycubic PLA vs Elegoo PLA: side by side

Spec ELEGOO PLA+ White 1KG ANYCUBIC PLA Grey 1KG ANYCUBIC PLA Black 1KG
HQ Score 60 58 57
Filament PLA+ 1.75mm PLA 1.75mm PLA 1.75mm
Accuracy +/- 0.02mm +/- 0.02mm +/- 0.02mm
Spool 1KG (2.2lbs) 1KG, reusable spool 1KG, reusable spool
Color White Texture Grey Black
Toughness Enhanced toughness stated Not stated Not stated
Identification Not stated Intelligent chips for ACE Pro Intelligent chips for ACE Pro
Drying Dried before packaging, vacuum sealed Dried 24 hours, vacuum sealed with desiccants Dried 24 hours, vacuum sealed with desiccants
Compatibility Most FDM printers; Neptune, P1P, P1S, Ender, Kobra series Most FDM printers Most FDM printers
Warranty Not stated Not stated Not stated

These numbers come straight from each maker’s listing and are rated, not measured by us (5 November 2026).

Diameter and accuracy

Each spool states a 1.75mm diameter with +/- 0.02mm accuracy, so diameter does not separate them. The Anycubic listings add low shrinkage and stable printing dimensions, while the Elegoo listing states advanced measurement procedures during manufacturing for consistent and smooth feeding.

Strength and finish

The Elegoo PLA+ White is the only spool here that states enhanced toughness, with improved mechanical properties over standard PLA and increased impact strength for more robust prints. It also states a glossy surface with strong layer adhesion and low warp and shrinkage. The Anycubic spools state a glossy finish with good bridging and even layer fusion, but no toughness claim.

Spool and feeding

The Anycubic spools state a reusable spool with neat winding, no crossing turns and a larger spool inner diameter for smoother feeding. The Elegoo spool states full mechanical winding with strict manual inspection, neatly wound to reduce tangles, snap and line breakage. Each spool states clog-free printing with no clogging or bubbling.

Compatibility

Each spool states it fits most FDM printers. The Elegoo listing names the Neptune series, P1P, P1S, Ender series and Kobra series, and states a lower printing temperature that makes it easy to print and set up. The Anycubic listings state great compatibility with a wide range of temperatures and printing speeds, plus intelligent identification chips for the ACE Pro.

What the listings leave unclear

Some figures do not line up. The Anycubic Grey listing opens with a case of 10 packs while its title and spec table describe a 1KG spool, so the pack count is unclear. The Anycubic Black spec table lists 0.22 pounds, which does not match a 1KG spool. No listing states a warranty term.

Choose the ELEGOO PLA+ White if

  • You want stated enhanced toughness and impact strength for functional parts.
  • You want a glossy finish with strong layer adhesion and low warp.
  • You print on a Neptune, P1P, P1S, Ender or Kobra series printer.

Choose the ANYCUBIC PLA Grey or Black if

  • You run an ACE Pro and want automatic filament identification.
  • You want a reusable spool with neat winding and a larger inner diameter.
  • You want filament dried for 24 hours before packaging and vacuum sealed with desiccants.

For more PLA comparisons, see silk PLA vs wood PLA.

Safety

Keep filament dry and print in a ventilated space. Both listings dry the filament before packaging and vacuum seal it, and moisture can cause bubbling and poor adhesion. Store the spool sealed with desiccant between prints.

Project Match

  • Functional parts that take knocks: ELEGOO PLA+ White, for stated enhanced toughness and impact strength.
  • Glossy display models: ELEGOO PLA+ White, for its stated glossy surface.
  • ACE Pro workflow prints: ANYCUBIC PLA Grey or Black, for intelligent identification chips.
  • Everyday prototypes and models: any spool here, since each states 1.75mm with +/- 0.02mm accuracy.

FAQ: lasers and CNC

Is Elegoo PLA+ tougher than standard PLA?

Yes, per the listing: ELEGOO PLA Plus states improved mechanical properties over standard PLA, with increased impact strength and toughness.

Do both filaments fit most FDM printers?

Yes. Each spool states a 1.75mm diameter for most FDM printers, and the Elegoo listing names the Neptune, P1P, P1S, Ender and Kobra series.

What does the Anycubic identification chip do?

The Anycubic filaments feature intelligent identification chips that integrate with the ACE Pro for automatic identification.

Why does the Anycubic Black listing show a different weight?

Its spec table lists 0.22 pounds, which does not match a 1KG spool. Trust the title’s 1KG.

Related: matte PLA vs PLA Plus, Pla vs Pva Filament, best filament dryer cabinet.

More buying guides