Best Glitter PLA Filament (2026)
Five glitter PLA spools compared by glitter effect, colour change, diameter accuracy, drying and warranty, for decorations, gifts and glowing lamps.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallFLASHFORGE Mermaid9.6/10View on Amazon - 2
Best Multi-ColourFLASHFORGE Rainbow9.6/10View on Amazon - 3
Best Two-SpoolELEGOO Sparkle 2KG9.6/10View on Amazon - 4
Best DocumentedHP3DF Glitter Pink9.6/10View on Amazon
A plain print in matte black disappears on the shelf. A glitter print catches the light, and the sparkle is what turns a simple model into a gift or a display piece. The best glitter pla filament covers the sparkle spools makers use for decorations, gifts and glowing lamps, and the picks here show the range: single-colour sparkle, two-spool sets and translucent gradients that change colour. Each listing states its colour, diameter, drying and warranty, so the choice comes down to glitter effect, colour change and fit.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall FLASHFORGE Mermaid: Translucent glitter PLA with a Pale Blue to Light Blue colour change, adjustable transparency, vacuum-sealed with desiccants. Check price on Amazon
- Best Multi-Colour FLASHFORGE Rainbow: Translucent glitter PLA with a Yellow Pink Blue Green colour change, adjustable transparency, vacuum-sealed with desiccants. Check price on Amazon
- Best Two-Spool ELEGOO Sparkle 2KG: 2 spools of 1 kg in Sparkle Red and Sparkle Green, 1.75 mm at plus or minus 0.02 mm, vacuum-sealed. Check price on Amazon
- Best Documented HP3DF Glitter Pink: Glitter Pink PLA, 1.75 mm at plus or minus 0.02 mm, with nozzle and bed temperatures stated and vacuum sealing with desiccant. Check price on Amazon
Machines on the list

FLASHFORGE Translucent Glitter PLA Mermaid Tears
A translucent glitter PLA spool with a Pale Blue to Light Blue colour change, adjustable transparency, precision drying and vacuum sealing with desiccants.
Pros
- Fast colour change between Pale Blue and Light Blue, per the title
- Translucent glitter PLA with adjustable transparency
- Ultra-fine glitter for a cosmic shimmer, per the listing
- Precision-dried and vacuum-sealed with desiccants, per the listing
Cons
- No plus or minus accuracy figure is stated
- No nozzle size is stated
- No bed temperature is stated

ELEGOO PLA 3D Printer Filament 1.75mm 2KG Sparkle
Two 1 kg spools of sparkle PLA in Red and Green, 1.75 mm at plus or minus 0.02 mm, vacuum-sealed, for most FDM 3D printers.
Pros
- 2 spools of 1 kg, in Sparkle Red and Sparkle Green
- Glitter particles for a twinkling effect, per the listing
- 1.75 mm diameter at plus or minus 0.02 mm
- Vacuum-sealed to prevent moisture absorption, per the listing
Cons
- No warranty term is stated
- No safety certification is stated
- No nozzle temperature is stated
- No bed temperature is stated

FLASHFORGE Translucent Glitter PLA Crystal Rainbow
A translucent glitter PLA spool with a Yellow Pink Blue Green colour change, adjustable transparency, precision drying and vacuum sealing with desiccants.
Pros
- Fast colour change between Yellow Pink Blue Green, per the title
- Translucent glitter PLA with adjustable transparency
- Ultra-fine glitter for a cosmic shimmer, per the listing
- Precision-dried and vacuum-sealed with desiccants, per the listing
Cons
- No plus or minus accuracy figure is stated
- No nozzle size is stated

HP3DF Glitter PLA Filament
A glitter pink PLA spool, 1.75 mm at plus or minus 0.02 mm, made from 100% virgin PLA, precision wound and vacuum-sealed with a desiccant pack.
Pros
- 100% virgin PLA with no recycled or filled content, per the listing
- Recommended nozzle temperature 190 to 220 and bed temperature 50 to 60 stated
- Precision winding with manual inspection, per the listing
- Dried before packaging, vacuum-sealed with a desiccant pack, per the listing
Cons
- No warranty term is stated
- No safety certification is stated
- No nozzle size is stated
- Glitter Pink is the only colour in this listing

ELEGOO PLA 3D Printer Filament 1.75mm Sparkle
A sparkle green PLA spool, 1 kg, 1.75 mm at plus or minus 0.02 mm, vacuum-sealed, for most FDM 3D printers.
Pros
- Glitter particles for a twinkling effect, per the listing
- 1.75 mm diameter at plus or minus 0.02 mm
- Vacuum-sealed to prevent moisture absorption, per the listing
- Nozzle no smaller than 0.4 mm recommended, per the listing
Cons
- No warranty term is stated
- No safety certification is stated
- No nozzle temperature is stated
- Sparkle Green is the only colour in this listing
Other machines to compare
AMOLEN Shiny 3D Printer PLA FilamentCheck price on Amazon
ZIRO Diamond Series FilamentCheck price on Amazon
PLA Filament 1.75mmCheck price on Amazon
IEMAI 3D PLA Filament 1.75mmCheck price on Amazon
Glitter PLA Filament 1.75mmCheck price on Amazon
Specs compared
| Model | HQ Score | Colour | Diameter | Drying | Warranty |
|---|---|---|---|---|---|
| FLASHFORGE Mermaid | 9.6/10 | Pale Blue to Light Blue | 1.75 mm | Precision-dried, vacuum-sealed | Not stated |
| ELEGOO Sparkle 2KG | 9.6/10 | Sparkle Red and Green | 1.75 mm | Vacuum-sealed | Not stated |
| FLASHFORGE Rainbow | 9.6/10 | Yellow Pink Blue Green | 1.75 mm | Precision-dried, vacuum-sealed | Not stated |
| HP3DF Glitter Pink | 9.6/10 | Glitter Pink | 1.75 mm | Dried, vacuum-sealed with desiccant | Not stated |
| ELEGOO Sparkle Green | 9.6/10 | Sparkle Green | 1.75 mm | Vacuum-sealed | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026. Where a listing contradicts itself, both figures are shown.
What the listings tell you
We read 5 glitter PLA listings for this guide. Two of the listings state a two-month warranty in the bullets and a 1 year term in the spec table, and the other listings state no warranty term. One listing lists 10 items in the spec table while the bullets describe a single spool. Read the warranty and pack-size lines, not just the title.
Buying guide: best glitter pla filament
Glitter effect
The ELEGOO spools infuse glitter particles for a twinkling effect, per the listing. The FLASHFORGE spools use ultra-fine glitter for a cosmic shimmer, per the listing. The HP3DF spool is a twinkling glitter pink, per the title. The effect is the whole point of glitter PLA, so pick the sparkle you want to see on the shelf.
Diameter and accuracy
Every spool here is 1.75 mm. ELEGOO and HP3DF list dimensional accuracy of plus or minus 0.02 mm; the FLASHFORGE listings state 1.75 mm PLA with dimensional accuracy but no plus or minus figure. A steady diameter matters most when the glitter has to feed evenly, and the listings that state a tolerance figure make that check easy. See our 3D printer filament types guide for how PLA compares with other materials.
Nozzle size
ELEGOO recommends a nozzle no smaller than 0.4 mm for its sparkle filament. The other listings state no nozzle size. Glitter particles pass through the nozzle with the plastic, so follow the nozzle size the listing states where one is given.
Drying and storage
ELEGOO vacuum-seals its spools to prevent moisture absorption. FLASHFORGE precision-dries and vacuum-seals with desiccants. HP3DF dries each spool before packaging and vacuum-seals with a desiccant pack. Keep spools sealed and dry between prints.
Warranty
The FLASHFORGE listings state a two-month warranty in the bullets and a 1 year term in the spec table, plus a 30-day money-back. The other listings state no warranty term. Read both lines before ordering, and keep the warranty line in mind when the two figures disagree.
Print in a ventilated room and follow your printer maker’s guidance on temperatures and enclosures. Keep filament sealed and dry, and keep spools away from children.
Project Match
- Glowing lamps and translucent décor: FLASHFORGE Mermaid, a translucent glitter PLA with adjustable transparency.
- Multi-colour sparkle prints: FLASHFORGE Rainbow, with a Yellow Pink Blue Green colour change.
- Artistic designs, decorations and gift items: ELEGOO Sparkle Green and ELEGOO Sparkle 2KG, with a twinkling glitter effect.
- Functional parts and everyday projects: HP3DF Glitter Pink, made from 100% virgin PLA with low warping and low shrinkage.
How the scores add up
The HQ Score weighs performance, build, value, safety where it applies, and warranty. Performance weighs the most, because the glitter effect and colour change decide how the print looks. Safety points come from named certifications or safety features, and none of these listings names any. Scores come from the listing text, and the winners were chosen by score and by fit.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| FLASHFORGE Mermaid | 9.6 | 32 | 21 | 20 | n/a | 0 |
| ELEGOO Sparkle 2KG | 9.6 | 30 | 21 | 21 | n/a | 0 |
| FLASHFORGE Rainbow | 9.6 | 32 | 21 | 19 | n/a | 0 |
| HP3DF Glitter Pink | 9.6 | 30 | 21 | 20 | n/a | 0 |
| ELEGOO Sparkle Green | 9.6 | 29 | 21 | 20 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What is glitter PLA filament?
Glitter PLA is PLA filament infused with glitter particles for a twinkling, eye-catching effect, per the ELEGOO listing. The FLASHFORGE spools use ultra-fine glitter for a cosmic shimmer, and the HP3DF spool is a twinkling glitter pink.
What diameter is glitter PLA filament?
Every spool here is 1.75 mm. ELEGOO and HP3DF list dimensional accuracy of plus or minus 0.02 mm; the FLASHFORGE listings state 1.75 mm PLA with dimensional accuracy but no plus or minus figure.
What nozzle size does glitter PLA need?
ELEGOO recommends a nozzle no smaller than 0.4 mm for its sparkle filament. The other listings state no nozzle size.
Does glitter PLA need drying?
ELEGOO vacuum-seals its spools, FLASHFORGE precision-dries and vacuum-seals with desiccants, and HP3DF dries before packaging and vacuum-seals with a desiccant pack. Keep spools sealed and dry between prints.
Which glitter PLA has a warranty?
The FLASHFORGE listings state a two-month warranty in the bullets and a 1 year term in the spec table, plus a 30-day money-back. The other listings state no warranty term.
Related: the 3D printer hub, best 3D PLA filament, 3D printer filament types, best black glitter filament, best glitter 3D filament, best glitter filament bundle, best basic PLA filament with spool and best adhesive for PLA filament.




