Best Glitter Filament for 3d Printing (2026)
Five glitter PLA spools compared by glitter size, print settings, color and finish, and what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallANYCUBIC Galaxy PLA9.7/10View on Amazon - 2
Best for DetailZIRO Diamond PLA9.7/10View on Amazon - 3
Best GlowMEUYMEU Firefly PLA+9.6/10View on Amazon - 4
Best WarrantySUNLU Galaxy PLA9.5/10View on Amazon
A plain print in matte gray disappears on a shelf. A glitter print catches the light from across the room, and that is the whole point of glitter filament: color and sparkle that a plain spool cannot give. This guide compares the best glitter filament for 3d printing, five glitter PLA spools, by the glitter each listing describes, the print settings each listing states, and what each listing leaves out.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall ANYCUBIC Galaxy PLA: A chameleon color-changing glitter PLA with full print settings, a reusable spool and identification chips for the ACE Pro. Check price on Amazon
- Best for Detail ZIRO Diamond PLA: Finer and denser glitter powder, +/- 0.05mm accuracy, clog-free printing and a cleaning filament sample in the box. Check price on Amazon
- Best Glow MEUYMEU Firefly PLA+: Glitter Firefly Blue that glows in the dark after charging in daylight or UV light, at +/- 0.03mm accuracy. Check price on Amazon
- Best Warranty SUNLU Galaxy PLA: The smallest stated tolerance at +/- 0.02mm and the only warranty term here, 1 year. Check price on Amazon
Machines on the list

ANYCUBIC Galaxy PLA 3D Printer Filament, 1KG
A 1KG spool of Galaxy Blue PLA, 1.75mm, with a chameleon color that changes with every turn and micro-sparkle powder for a starry finish, printing on standard PLA settings.
Pros
- Chameleon color-changing finish that reveals new colors with every turn
- Micro-sparkle powder for a starry finish that conceals layer lines, per the listing
- Nozzle 200-230°C, bed 60-65°C and speed 40-260mm/s, all stated in the listing
- Reusable spool with a threaded connection, plus intelligent identification chips for the ACE Pro
Cons
- No warranty term is stated
- No dimensional accuracy figure is stated
- No safety certification is stated
- Intelligent identification chips work with the ACE Pro only, per the listing

ZIRO Diamond Series Filament
A 1KG spool of Diamond Series purple PLA, 1.75mm, with finer and denser glitter powder, dried for 24 hours before vacuum sealing, and a stated accuracy of +/- 0.05mm.
Pros
- Finer and denser glitter powder than others, per the listing, with a stated accuracy of +/- 0.05mm
- Nozzle 190-220°C, bed 50-60°C and speed 30-90 mm/s, all stated in the listing
- Dried for 24 hours before vacuum sealing, and neatly wound to avoid tangles
- Includes a free reseal bag, 5M of cleaning filament and a 5M random filament sample
Cons
- No warranty term is stated
- No safety certification is stated
- Purple is the only color in this listing
- States no glitter particle size

MEUYMEU 1KG Glitter Firefly Blue in the Dark PLA
A 1KG spool of Glitter Firefly Blue PLA+, 1.75mm, that glows in the dark after absorbing light, with a stated accuracy of +/- 0.03mm and a neatly wound spool.
Pros
- Glitter Firefly Blue that glows in the dark after absorbing sunlight or UV light
- Stated accuracy of +/- 0.03mm on a standard 1.75mm diameter
- Nozzle 200-220°C, speed 0-300mm/s and bed 0-60°C, all stated in the listing
- Vacuum-sealed with desiccant, and neatly wound to reduce tangling
Cons
- No warranty term is stated
- No safety certification is stated
- Glow needs about 30 minutes of bright daylight or UV light to charge, per the listing
- Glow varies with light intensity, exposure time, wall thickness and model structure, per the listing

LOVOON 3D Printing PLA Filament 1.75mm Sparkle
A 1KG spool of Galaxy Green PLA, 1.75mm, with 20um-25um glitter that is subtler than normal 50um-60um glitter, for printing with a 0.4 mm nozzle or bigger.
Pros
- Glitter sized 20um-25um, subtler than normal 50um-60um glitter, per the listing
- No jamming and no bubbles, per the listing
- Nozzle 190-230°C, bed 60°C and speed 30-200mm/s, all stated in the listing
- Vacuum-sealed with desiccants, and compatible with Bambu Lab printers without an AMS unit
Cons
- No warranty term is stated
- No safety certification is stated
- No dimensional accuracy figure is stated

SUNLU Galaxy PLA Filament 1.75mm
A 1KG spool of Galaxy Star Brown PLA, 1.75mm, with a color-shifting pearlescent glitter finish and a stated accuracy of +/- 0.02mm, covered by a 1 year warranty.
Pros
- Color-shifting, pearlescent glitter finish
- Stated accuracy of +/- 0.02mm, the smallest tolerance in this guide
- 1 year warranty, the only warranty term stated in this guide
- Neatly wound 1KG spool for most FDM 3D printers
Cons
- No print settings are stated: no nozzle, bed or speed figures
- No safety certification is stated
- The listing is a single bullet, with no spool dimensions and no extras
- No glitter particle size is stated
Other machines to compare
RepRapper PLA FilamentCheck price on Amazon
EONO3D Glitter FilamentCheck price on Amazon
iSANMATE 3D Printer Filament Clear PLACheck price on Amazon
IEMAI 3D PLA Filament 1.75mmCheck price on Amazon
IEMAI 3D Printer Filament 1.75mmCheck price on Amazon
Specs compared
| Model | HQ Score | Filament | Diameter | Accuracy | Nozzle | Warranty |
|---|---|---|---|---|---|---|
| ANYCUBIC Galaxy PLA | 9.7/10 | Galaxy PLA, Galaxy Blue | 1.75mm | Not stated | 200-230°C | Not stated |
| ZIRO Diamond PLA | 9.7/10 | Diamond PLA, Purple | 1.75mm | +/- 0.05mm | 190-220°C | Not stated |
| MEUYMEU Firefly PLA+ | 9.6/10 | PLA+, Glitter Firefly Blue | 1.75mm | +/- 0.03mm | 200-220°C | Not stated |
| LOVOON Galaxy PLA | 9.6/10 | Galaxy PLA, Glitter Green | 1.75mm | Not stated | 190-230°C | Not stated |
| SUNLU Galaxy PLA | 9.5/10 | Galaxy PLA, Star Brown | 1.75mm | +/- 0.02mm | Not stated | 1 year |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026.
What the glitter filament listings tell you
We read the glitter filament listings for this guide. Only one states a warranty term, and none states a safety certification. One listing states a glitter particle size, and four state full print settings. One listing is a single bullet with no settings at all, and one disagrees with itself on weight. Read the settings, not just the color name.
Buying guide: best glitter filament for 3d printing
Glitter size and clogging
Glitter is a particle in the plastic, and the listings that name a size show how fine it runs. The LOVOON listing states glitter of 20um-25um, subtler than normal 50um-60um glitter, and promises no jamming and no bubbles. The ZIRO listing calls its glitter powder finer and denser than others and calls the filament clog-free, but states no particle size. The other listings name no glitter size at all. A finer glitter is the listing’s answer to clogging; the listings do not name a nozzle material, so check the listing if the nozzle matters to the print.
Print settings
Four listings state nozzle, bed and speed. Nozzle temperatures run 190-230°C across the four, beds run 0-65°C, and speeds run 30-300mm/s. The ANYCUBIC listing adds that it uses standard PLA print settings. The SUNLU listing states no settings at all, so its spool needs the printer’s own PLA profile. Start with the listing’s stated settings and adjust for the printer.
Color and finish
Every spool here is a glitter PLA, but the finishes differ. The ANYCUBIC Galaxy Blue is chameleon: the color changes with every turn, and the micro-sparkle gives a starry finish that the listing says conceals layer lines. The SUNLU Star Brown is color-shifting and pearlescent. The LOVOON Galaxy Green changes subtly in sunlight. The ZIRO purple is a shiny sparkle, and the MEUYMEU Firefly Blue adds a glow in the dark after charging in daylight or UV light. Pick the finish by the piece: a starry print for display, a glow print for night pieces.
Spool and extras
Every spool here is 1KG of 1.75mm filament. The ANYCUBIC spool is reusable with a threaded connection, made for spool-free refills, and the filament carries identification chips for the ACE Pro. The ZIRO box adds a free reseal bag, 5M of cleaning filament and a 5M random filament sample. The MEUYMEU and LOVOON spools arrive vacuum-sealed with desiccant. The SUNLU spool is neatly wound, and the listing states nothing else about it.
Glitter filament prints like PLA: print in a ventilated space, keep the nozzle and bed clear of clutter, and follow the printer manual for temperatures and speeds.
Project Match
Pair the project with the pick:
- Display pieces that catch the light: the ANYCUBIC Galaxy Blue, with its chameleon color and starry finish.
- Detailed models: the ZIRO Diamond purple, with finer and denser glitter and +/- 0.05mm accuracy.
- Night pieces, masks and fantasy props: the MEUYMEU Firefly Blue, with glitter and a glow in the dark.
- Fine glitter with a stated size: the LOVOON Galaxy Green, with 20um-25um glitter.
How the scores add up
Each filament is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. For filament, safety points come from named safety features or certifications, and none of the listings here names one, so every safety score here is zero. Only one listing states a warranty term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ANYCUBIC Galaxy PLA | 9.7 | 32 | 22 | 21 | n/a | 0 |
| ZIRO Diamond PLA | 9.7 | 30 | 22 | 21 | n/a | 0 |
| MEUYMEU Firefly PLA+ | 9.6 | 30 | 21 | 21 | n/a | 0 |
| LOVOON Galaxy PLA | 9.6 | 29 | 20 | 20 | n/a | 0 |
| SUNLU Galaxy PLA | 9.5 | 26 | 20 | 16 | n/a | 2 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
Is glitter filament abrasive?
The listings do not use the word abrasive. The LOVOON listing states glitter of 20um-25um, subtler than normal 50um-60um glitter, and promises no jamming. The ZIRO listing calls its glitter powder finer and denser than others and calls the filament clog-free. No listing here names a nozzle material.
What print settings do glitter PLA filaments use?
Four listings state nozzle, bed and speed: nozzle 190-230°C, beds 0-65°C and speeds 30-300mm/s across the four. The ANYCUBIC listing adds that it uses standard PLA print settings. The SUNLU listing states no settings at all.
Does glitter filament hide layer lines?
The ANYCUBIC listing says its formula conceals layer lines for a flawless, metallic shine. The other listings make no such claim.
Which glitter filament glows in the dark?
The MEUYMEU Glitter Firefly Blue: it absorbs sunlight or UV light, then releases the stored light in darker surroundings. About 30 minutes of bright daylight or UV light charges the glow, per the listing.
Do any of these filaments state a warranty?
Yes, one: the SUNLU listing states a 1 year warranty. The other four listings state no warranty term.
Related: best glitter PLA filament, best glow in the dark PLA filament, the 3D printers hub and the best PETG glow in the dark filament. Also see our silica gel desiccant packs for filament. Also see our smooth build plate for 3D printer. Also see our tools to clean up 3D prints. Also see our filament cutter knife set. Also see our 3D printing cleaning kit. Also see our best glitter 3D filament. Also see our best black glitter filament.




