Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Glitter Abs Filament (2026)

Filaments compared by glitter effect, material, temperature, speed and tolerance, with the plain ABS and the glitter PLA and PETG picks named plainly.

Best Glitter Abs Filament (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Stronghero3D PETGBest OverallStronghero3D PETG9.6/10View on Amazon
  2. 2SUNLU Galaxy PLABest Glitter PLASUNLU Galaxy PLA9.6/10View on Amazon
  3. 3Epelay Rainbow PLABest Rainbow GlitterEpelay Rainbow PLA9.5/10View on Amazon
  4. 4Polymaker ABS PurpleBest ABSPolymaker ABS Purple9.5/10View on Amazon

A print with glitter in the filament catches the light on every layer, and the sparkle runs through the whole part instead of sitting on the surface.

This guide compares the best glitter abs filament picks by what the listings state, and it starts with an honest note: none of the 5 listings is glitter ABS. The Stronghero3D is glitter PETG, the Polymaker is plain ABS with no glitter stated, and the rest are glitter PLA.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Stronghero3D PETG: Highest HQ Score here: galaxy glitter PETG, 220–240°C nozzle, 2-year warranty stated Check price on Amazon
  • Best Glitter PLA SUNLU Galaxy PLA: Color-shifting pearlescent glitter, 200–230°C nozzle, smooth extrusion, neatly wound Check price on Amazon
  • Best Rainbow Glitter Epelay Rainbow PLA: Rainbow glitter with color changing effect, ±0.02mm accuracy, 200–230°C nozzle Check price on Amazon
  • Best ABS Polymaker ABS Purple: The only ABS here: heat-resistant to a 104°C Vicat softening temperature, ±0.03mm accuracy Check price on Amazon

Machines on the list

PETG Filament 1.75mm,Emerald Crystal​,Green Blue

PETG Filament 1.75mm,Emerald Crystal​,Green Blue

Stronghero3D9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A galaxy glitter PETG filament, 1.75mm, translucent multi color gradient, with a 2-year warranty stated.

Pros

  • Galaxy glitter sparkling with a translucent multi color gradient
  • 2-year warranty stated, the only warranty here
  • Vacuum-sealed with a silica desiccant
  • Triple filament diameter feedback mechanism, per the listing

Cons

  • PETG, not ABS, per the listing
  • No tolerance figure is stated
  • The color shifts with angles, so the look varies by print
  • No drying guidance is stated in the listing
SUNLU Galaxy PLA Filament 1.75mm

SUNLU Galaxy PLA Filament 1.75mm

YOOPAI9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A galaxy PLA filament, 1.75mm, color-shifting pearlescent glitter, with a smooth gloss finish and neatly wound spool.

Pros

  • Color-shifting pearlescent glitter with a star-like shimmer
  • Ultra-fine particles under 200 μm for smooth extrusion
  • Neatly wound on a reusable spool
  • Nozzle 200–230°C and bed 50–70°C stated

Cons

  • PLA, not ABS, per the listing
  • No tolerance figure is stated
  • Title names SUNLU while the brand reads YOOPAI
Epelay Rainbow Glitter PLA 3D Printer Filament

Epelay Rainbow Glitter PLA 3D Printer Filament

Epelay9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A rainbow glitter PLA filament, 1.75mm, with a sparkling color effect and ±0.02mm accuracy.

Pros

  • Rainbow glitter with a color changing effect
  • ±0.02mm accuracy stated
  • Nozzle 200–230°C and bed 55–65°C stated
  • Pre-dried and vacuum-sealed, per the listing

Cons

  • PLA, not ABS, per the listing
  • No warranty term is stated
  • Pre-dry at 50°C for 6-8 hours is recommended, per the listing
  • No layer height is stated
Polymaker ABS Filament Purple 1KG 1.75mm

Polymaker ABS Filament Purple 1KG 1.75mm

Polymaker9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An ABS filament, 1.75mm, purple, heat-resistant with a 104°C Vicat softening temperature and ±0.03mm accuracy.

Pros

  • The only ABS here, heat-resistant to a 104°C Vicat softening temperature
  • ±0.03mm dimensional accuracy stated
  • Low odor, per the listing
  • Vacuum sealed with desiccant

Cons

  • No glitter is stated, plain purple only
  • No print speed is stated
  • No warranty term is stated
  • Enclosed chamber is recommended, per the listing
iSANMATE Clear PLA 3D Printer Filament

iSANMATE Clear PLA 3D Printer Filament

iSANMATE9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A clear PLA filament, transparent rainbow glitter, PLA+, with ±0.02mm tolerance and speeds up to 600mm/s.

Pros

  • Transparent rainbow glitter in on and off states, per the listing
  • ±0.02mm tolerance stated
  • Reaches up to 600mm/s, per the listing
  • Clear with light transmission, per the listing

Cons

  • PLA, not ABS, per the listing
  • No warranty term is stated
  • No nozzle temperature is stated

Other machines to compare

Specs compared

Model HQ Score Material Glitter Nozzle temp Accuracy Warranty
Stronghero3D PETG 9.6/10 PETG Galaxy glitter 220–240°C Not stated 2 years
SUNLU Galaxy PLA 9.6/10 PLA Pearlescent glitter 200–230°C Not stated Not stated
Epelay Rainbow PLA 9.5/10 PLA Rainbow glitter 200–230°C ±0.02mm Not stated
Polymaker ABS Purple 9.5/10 ABS Not stated 245–265°C ±0.03mm Not stated
iSANMATE Clear PLA 9.5/10 PLA Rainbow glitter Not stated ±0.02mm Not stated

Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026.

What the listings tell you, and what they leave out

None of the 5 listings is glitter ABS, so this guide ranks the closest matches and says plainly what each pick is. The Stronghero3D is glitter PETG with a 2-year warranty stated; the SUNLU, Epelay and iSANMATE are glitter PLA; the Polymaker is ABS with no glitter stated. Some listings contradict themselves: the SUNLU title names SUNLU while the brand reads YOOPAI, and its title says 1kg while the spec table lists 2.6 pounds; the iSANMATE title says 1KG/Spool while the spec table lists 1.1 pounds. Trust the title and bullets over the spec table.

Buying guide: choosing the best glitter abs filament

Glitter or ABS: which matters more

No listing here has glitter and ABS together, so choose by the feature that matters more. For glitter, the Stronghero3D, SUNLU, Epelay and iSANMATE all state a glitter or galaxy effect. For ABS, only the Polymaker states ABS, and it states no glitter. A maker who needs ABS for heat resistance should weigh the Polymaker; a maker who needs sparkle should weigh the glitter picks and print them as PLA or PETG.

Nozzle and bed temperatures

The SUNLU and Epelay print at a nozzle temperature of 200–230°C; the Stronghero3D PETG prints at 220–240°C; the Polymaker ABS prints at 245–265°C with a bed temperature of 90–100°C. The iSANMATE states no nozzle temperature. Match the temperature to the material before ordering.

Tolerance and clog-free printing

The Epelay and iSANMATE state ±0.02mm accuracy; the Polymaker states ±0.03mm dimensional accuracy. The SUNLU states ultra-fine pearlescent particles under 200 μm for smooth extrusion and clog-free printing. The Stronghero3D states a triple filament diameter feedback mechanism. Check the listing for the tolerance before ordering.

Speed

The iSANMATE reaches up to 600mm/s, per the listing. The SUNLU lists a speed of 50–250 mm/s. The Epelay lists a print speed of 50–150mm/s. The Stronghero3D lists a printing speed between 25-300mm/s. The Polymaker states no print speed.

Spool size and storage

The titles state a 1kg spool for every pick here. The Polymaker is vacuum sealed with desiccant; the Stronghero3D is vacuum-sealed with a silica desiccant; the Epelay is pre-dried and vacuum-sealed. Dry the Polymaker at 70°C for approximately 6 hours if it absorbs moisture, per the listing.

Project Match

  • Functional parts that need heat resistance: Polymaker ABS Purple, the only ABS here, with a 104°C Vicat softening temperature.
  • Galaxy and starry prints: Stronghero3D PETG, with a galaxy glitter formula and a translucent multi color gradient.
  • Color-shifting purple prints: SUNLU Galaxy PLA, with color-shifting pearlescent glitter.
  • Rainbow glitter prints: Epelay Rainbow PLA and iSANMATE Clear PLA, with a rainbow glitter effect.
  • Prints that need a stated warranty: Stronghero3D PETG, with a 2-year warranty stated.

How the scores add up

The HQ Score weighs performance (glitter effect, print settings and material fit), build quality (tolerance, spool and sealing), value (spool size and what the listing states), safety and warranty. No listing states a safety certification, so safety earns no points on any pick. A factor the listing does not state scores no points.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Stronghero3D PETG 9.6 27 20 19 n/a 3
SUNLU Galaxy PLA 9.6 28 21 19 n/a 0
Epelay Rainbow PLA 9.5 27 21 19 n/a 0
Polymaker ABS Purple 9.5 24 22 19 n/a 0
iSANMATE Clear PLA 9.5 26 20 18 n/a 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.

FAQ: lasers and CNC

Is there a glitter ABS filament here?

No: none of the 5 listings is glitter ABS. The Polymaker is ABS with no glitter stated, and the glitter picks are PLA or PETG. Check the material in the listing before ordering.

What temperature does glitter PLA print at?

The SUNLU and Epelay list a nozzle temperature of 200–230°C. The Stronghero3D PETG lists 220–240°C. The Polymaker ABS lists 245–265°C. The iSANMATE states no nozzle temperature.

Does glitter filament clog the nozzle?

The SUNLU states ultra-fine pearlescent particles under 200 μm for smooth extrusion and clog-free printing. The Epelay states a clog-free and bubble-free design. The Stronghero3D states the glitter particles are very tiny size without chance getting block, per the listing.

What tolerance do these filaments state?

The Epelay and iSANMATE state ±0.02mm accuracy; the Polymaker states ±0.03mm dimensional accuracy. The SUNLU and Stronghero3D state no tolerance figure.

Related: the 3d printers hub, best glitter 3d filament, best christmas glitter filament and best blue abs filament.

More buying guides

3D Printers ·

Best Glitter PLA Filament (2026)

Five glitter PLA spools compared by glitter effect, colour change, diameter accuracy, drying and warranty, for decorations, gifts and glowing lamps.

3D Printers ·

Best Glitter Filament Bundle (2026)

Multi-roll glitter PLA bundles, compared by rolls, colors, accuracy and settings, with the stated specs and who should skip each.

3D Printers ·

Best Christmas Glitter Filament (2026)

Glitter PLA for Christmas prints, compared by color, accuracy, nozzle and bed settings, with the stated specs and who should skip each.