Best Glitter 3D Filament (2026): 5 Sparkling Picks
5 glitter PLA filaments for 3D printing, compared by diameter accuracy, nozzle size, pack size and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSUNLU Twinkling Blue9.7/10View on Amazon - 2
Best Matte GalaxyFLASHFORGE Galaxy9.7/10View on Amazon - 3
Best BundleELEGOO Sparkle Bundle9.6/10View on Amazon - 4
Best for Print SettingsHP3DF Glitter Purple9.6/10View on Amazon - 5
Best Multi-Color SampleYOUSU Galaxy 4-Pack9.5/10View on Amazon
A plain PLA print can look flat on a shelf, even when the shape is right. Glitter filament changes that: tiny particles in the plastic catch the light as the print turns, so decorations, gifts and display models carry a sparkle that paint cannot match. The best glitter 3d filament adds that twinkle without clogging the nozzle, and this guide compares glitter PLA filaments by diameter accuracy, nozzle size, pack size and what each listing states about warranty, so the pick fits the printer and the project.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall SUNLU Twinkling Blue: Plus or minus 0.02 mm tolerance, 0.4 mm nozzle printing, drying for 24 hours with desiccant, and a 1 year warranty. Check price on Amazon
- Best Matte Galaxy FLASHFORGE Galaxy: Galaxy Matte Black with silver glitter, 99% diameter consistency, low odor and a 1 year warranty. Check price on Amazon
- Best Bundle ELEGOO Sparkle Bundle: 4 kg across 4 spools in 4 colors, plus or minus 0.02 mm tolerance, vacuum-sealed, for 0.4 mm nozzles and up. Check price on Amazon
- Best for Print Settings HP3DF Glitter Purple: Virgin PLA with stated nozzle and bed temperatures, precision winding and a vacuum-sealed spool with desiccant. Check price on Amazon
- Best Multi-Color Sample YOUSU Galaxy 4-Pack: 4 colors in 250 g spools, including a glow-in-dark green, with stated print settings for 0.6 mm nozzles. Check price on Amazon
Machines on the list

SUNLU Shiny Sparkle PLA Filament 1.75mm
A 1 kg spool of twinkling blue sparkle PLA at 1.75 mm with plus or minus 0.02 mm tolerance, dried for 24 hours and vacuum-sealed with desiccant.
Pros
- Plus or minus 0.02 mm tolerance with CCD diameter measurement
- Glitter particles small enough to flow through 0.4 mm nozzles
- Dried for 24 hours and vacuum-sealed with a high-capacity desiccant
- 1 year warranty stated
Cons
- Only one color in this listing, Twinkling Blue
- No nozzle or bed temperature is stated
- Compatibility is stated as 99% of FDM printers, a maker claim with no printer list
- No print speed is stated

FLASHFORGE PLA Filament 1.75mm Galaxy Matte Black
A 1 kg spool of Galaxy Matte Black PLA with silver glitter at 1.75 mm, plus or minus 0.02 mm tolerance, dried for 24 hours and vacuum-sealed.
Pros
- 99% of the filament measures 1.75 mm plus or minus 0.02 mm, per the listing
- Low odor for home or office printing, as the maker states
- Melting point of 170°C to 180°C for easy handling
- 1 year warranty stated
Cons
- Needs a nozzle of 0.6 mm or larger for the best results
- Only one color in this listing, Galaxy Matte Black
- No print temperature is stated
- No print speed is stated

ELEGOO Sparkle PLA 3D Printer Filament 1.75mm
A 4 kg bundle of sparkle PLA in 4 colors, 4 spools of 1 kg each at 1.75 mm with plus or minus 0.02 mm tolerance, vacuum-sealed.
Pros
- 4 colors in this bundle: Sparkle Black, Red, Green and Gold
- Plus or minus 0.02 mm tolerance for consistent extrusion
- Vacuum-sealed spools to prevent moisture absorption
- Works with a 0.4 mm nozzle or larger
Cons
- No warranty term is stated
- No drying time or desiccant is stated
- Bundle only: no single-spool option in this listing
- No print temperature or print speed is stated

HP3DF Glitter PLA Filament
A 1 kg spool of Glitter Purple PLA at 1.75 mm with plus or minus 0.02 mm tolerance, made from virgin PLA with stated nozzle and bed temperatures.
Pros
- 100% virgin PLA with no recycled or filled content, as the listing states
- Stated print settings: nozzle 190 to 220°C, bed 50 to 60°C
- Precision winding with manual inspection to reduce tangles
- Vacuum-sealed with a desiccant pack, ready to print
Cons
- No warranty term is stated
- Only one color in this listing, Glitter Purple
- No nozzle size is stated
- No print speed is stated

YOUSU 3D Printer Filament Galaxy PLA Filament
A 4-color glitter PLA bundle of 250 g spools, including a glow-in-dark green, at 1.75 mm with stated print settings for 0.6 mm nozzles.
Pros
- 4 colors in this pack, including a glow-in-dark green
- Stated print settings: nozzle 180 to 220°C, bed 40 to 60°C, speed 40 to 100 mm/s
- Maker states no warping, jamming, blobs or layer delamination, with good bed adhesion
- Mechanical winding with manual inspection, no tangling or clogging stated
Cons
- No warranty term is stated
- No diameter tolerance figure is stated
- 250 g spools need an adapter for Bambu Lab AMS printers
- Maker recommends a 0.6 mm nozzle and layer thickness above 0.2 mm, with retraction care to avoid stringing
Other machines to compare
ELEGOO PLA 3D Printer Filament 1.75mm 2KG Sparkle Red/GreenCheck price on Amazon
ELEGOO PLA 3D Printer Filament 1.75mm Sparkle Black 1KGCheck price on Amazon
HP3DF Glitter PLA FilamentCheck price on Amazon
ZIRO Glitter PLA Filament 1.75mmCheck price on Amazon
IEMAI 3D Printer Filament 1.75mmCheck price on Amazon
Specs compared
| Model | HQ Score | Diameter | Tolerance | Pack | Nozzle | Warranty |
|---|---|---|---|---|---|---|
| SUNLU Twinkling Blue | 9.7/10 | 1.75 mm | +/- 0.02 mm | 1 kg spool | 0.4 mm | 1 year |
| FLASHFORGE Galaxy | 9.7/10 | 1.75 mm | +/- 0.02 mm | 1 kg spool | 0.6 mm or larger | 1 year |
| ELEGOO Sparkle Bundle | 9.6/10 | 1.75 mm | +/- 0.02 mm | 4 x 1 kg | 0.4 mm or larger | Not stated |
| HP3DF Glitter Purple | 9.6/10 | 1.75 mm | +/- 0.02 mm | 1 kg spool | Not stated | Not stated |
| YOUSU Galaxy 4-Pack | 9.5/10 | 1.75 mm | Not stated | 4 x 250 g | 0.6 mm | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026. Diameter is 1.75 mm on every pick, and tolerance is plus or minus 0.02 mm where the listing states a figure.
What the listings tell you, and what they leave out
2 of the 5 listings state a 1 year warranty, the SUNLU and the FLASHFORGE, and no listing states a safety certification, so safety scores zero across the picks. Every pick states a 1.75 mm diameter, and 4 of the 5 state a plus or minus 0.02 mm tolerance; the YOUSU states dimensional accuracy with no figure. Drying is the best-documented step: 4 of the 5 listings state vacuum-sealed spools, and the SUNLU and the FLASHFORGE state drying for 24 hours before sealing.
Print settings are uneven. The HP3DF and the YOUSU state nozzle and bed temperatures, the FLASHFORGE states a melting point of 170°C to 180°C, and the ELEGOO and the SUNLU state no temperatures at all. Only the YOUSU states a print speed, 40 to 100 mm/s.
Buying guide: the best glitter 3d filament for your printer
Glitter PLA prints like plain PLA with a single extra demand: the particles have to pass the nozzle without clogging it. Match the nozzle, the diameter accuracy and the pack to the project, then check the drying and the warranty.
Nozzle size and glitter
The SUNLU and the ELEGOO list 0.4 mm nozzles, the SUNLU stating its glitter particles are small enough to flow through a 0.4 mm nozzle and the ELEGOO recommending a nozzle no smaller than 0.4 mm. The FLASHFORGE and the YOUSU recommend a 0.6 mm nozzle, the FLASHFORGE for the best results and the YOUSU with a layer thickness above 0.2 mm. The HP3DF states no nozzle size, so check the nozzle before the first print.
Diameter accuracy
4 of the picks state a plus or minus 0.02 mm tolerance on a 1.75 mm diameter, and the FLASHFORGE adds that 99% of its filament holds that diameter, measured with CCD diameter measurement and self-adaptive control. The YOUSU states dimensional accuracy with no figure, so its consistency is the least documented here. A tight tolerance keeps extrusion steady, which matters more with glitter in the mix.
Pack size and colors
The ELEGOO bundle holds 4 spools of 1 kg each in Sparkle Black, Red, Green and Gold, and the YOUSU pack holds 4 spools of 250 g each in Galaxy Black, Chameleon Blue, Glow in the Dark Green Starry and Glitter Gold. The remaining picks are single 1 kg spools: Twinkling Blue from SUNLU, Galaxy Matte Black from FLASHFORGE and Glitter Purple from HP3DF. A bundle suits a maker who wants several colors in a single order; a spool suits a project in a single color.
Drying and storage
Moisture causes bubbling and popping in PLA, and the listings answer it with sealing. The ELEGOO, FLASHFORGE, SUNLU and HP3DF spools arrive vacuum-sealed, the SUNLU and the HP3DF with desiccant, and the FLASHFORGE and the SUNLU state drying for 24 hours before sealing. The YOUSU states no sealing or drying, so store it dry and check the first layers for popping.
Print settings
The HP3DF states a nozzle temperature of 190 to 220°C with a bed at 50 to 60°C, and the YOUSU states a nozzle of 180 to 220°C with a bed at 40 to 60°C and a speed of 40 to 100 mm/s. The FLASHFORGE states a melting point of 170°C to 180°C, which is not a print temperature. The ELEGOO and the SUNLU state no temperatures, so start from the printer’s PLA profile and watch the first layer.
Project Match
- Decorations and gifts in several colors: the ELEGOO bundle, with 4 colors across 4 spools of 1 kg each.
- Display models with a matte shimmer: the FLASHFORGE Galaxy Matte Black, with silver glitter and low odor stated for home printing.
- Single-color prints that hide layer lines: the SUNLU Twinkling Blue, whose shimmer the maker states masks layer lines.
- Models and functional parts with stated settings: the HP3DF Glitter Purple, with nozzle and bed temperatures stated.
- Sampling 4 colors, including glow-in-dark: the YOUSU pack, with 250 g spools and a printed adapter for Bambu Lab AMS printers.
How the scores add up
Each filament is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SUNLU Twinkling Blue | 9.7 | 32 | 21 | 21 | n/a | 2 |
| FLASHFORGE Galaxy | 9.7 | 30 | 21 | 20 | n/a | 2 |
| ELEGOO Sparkle Bundle | 9.6 | 30 | 21 | 21 | n/a | 0 |
| HP3DF Glitter Purple | 9.6 | 29 | 21 | 20 | n/a | 0 |
| YOUSU Galaxy 4-Pack | 9.5 | 27 | 19 | 20 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What nozzle size does glitter filament need?
The SUNLU and the ELEGOO list 0.4 mm nozzles, while the FLASHFORGE and the YOUSU recommend a 0.6 mm nozzle. The HP3DF states no nozzle size. When a listing recommends 0.6 mm, a 0.4 mm nozzle risks clogging on the glitter particles.
Does glitter filament clog the nozzle?
These listings state clog-free designs: the SUNLU states glitter particles small enough for 0.4 mm nozzles, the ELEGOO states no clogging and no bubbling, and the FLASHFORGE states a clog-free design with each spool dried for 24 hours and vacuum-sealed. Match the nozzle size the listing recommends and keep the filament dry.
What temperatures does glitter PLA print at?
The HP3DF states a nozzle of 190 to 220°C with a bed at 50 to 60°C, and the YOUSU states a nozzle of 180 to 220°C with a bed at 40 to 60°C. The FLASHFORGE states a melting point of 170°C to 180°C, which is not a print temperature, and the ELEGOO and the SUNLU state no temperatures.
How much filament comes in a bundle?
The ELEGOO bundle holds 4 spools of 1 kg each, and the YOUSU pack holds 4 spools of 250 g each. The SUNLU, FLASHFORGE and HP3DF picks are single 1 kg spools.
Does glitter PLA hide layer lines?
The SUNLU listing states its shimmering texture masks layer lines for a stone or metallic look with no sanding or painting. The other listings make no such claim, so expect normal PLA layer lines on the other picks.
Related: the 3D printers hub, tools to clean up 3D prints and silica gel desiccant packs for filament.




