Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Adhesive for PLA Filament (2026): 5 Picks Compared

Five adhesives for PLA filament, from a no-drip gel that bonds printed parts to bed glues that wash off with water, compared by use, temperature and cleanup.

Best Adhesive for PLA Filament (2026): 5 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1UniTak3D Bed AdhesiveBest OverallUniTak3D Bed Adhesive9.6/10View on Amazon
  2. 2DecorRom Bed SprayBest SprayDecorRom Bed Spray9.5/10View on Amazon
  3. 3LANDU Bed AdhesiveBest WarrantyLANDU Bed Adhesive9.4/10View on Amazon
  4. 4Anycubic Bed GlueBest Value PackAnycubic Bed Glue9.4/10View on Amazon
  5. 53D Super Glue GelBest Part Bond3D Super Glue Gel9.4/10View on Amazon

A printed part that will not stay on the bed ruins a print, and a joint that will not hold ruins a finished model. Adhesive solves these problems in different ways: a bed adhesive grips the print to the plate, while a glue for finished parts bonds printed pieces together. This guide compares the best adhesive for pla filament across the listings in this roundup, from bed glues that wash off with water to a no-drip gel for joining parts.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall UniTak3D Bed Adhesive: Two 70ml bottles with a spreader and a spare tip, for PLA, ABS, PETG and more. Check price on Amazon
  • Best Spray DecorRom Bed Spray: Spray-on bed adhesive, odorless and non-flammable, with PLA at 60-70℃ and ABS at 90-100℃. Check price on Amazon
  • Best Warranty LANDU Bed Adhesive: 150ml bed adhesive with a stated 1 Year warranty and water cleanup. Check price on Amazon
  • Best Value Pack Anycubic Bed Glue: Two 60ml bottles, up to 100 full-bed applications per bottle. Check price on Amazon
  • Best Part Bond 3D Super Glue Gel: No-drip gel for bonding PLA, ABS, PETG, TPU, ASA and nylon parts, to 110 °C. Check price on Amazon

Machines on the list

3D Printer Adhesive Glue 70ml

3D Printer Adhesive Glue 70ml

UniTak3D9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A two-bottle bed adhesive in 70ml bottles with a spreader and a spare tip, for PLA, ABS, PETG and more filaments.

Pros

  • Two 70ml bottles with a spreader and a spare applicator tip
  • Compatible with Bambu Lab, Flashforge, Creality, Anycubic and Elegoo printers
  • Works on glass, PEI, PEO, PET and aluminum build plates
  • Non-toxic raw materials with greatly reduced odor, per the listing

Cons

  • No warranty term is stated
  • No bed temperature is stated for any filament
  • No application count is stated per bottle
  • No item weight is stated in the listing
3D Printer Adhesive Glue

3D Printer Adhesive Glue

DecorRom9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A spray-on bed adhesive in a 200ml size for PLA, ABS, ASA, PETG, HIPS and TPU, with water cleanup.

Pros

  • Sprays on in 2 to 3 even layers from 20 to 30 cm away
  • States PLA at 60-70℃ and ABS at 90-100℃
  • Odorless and non-flammable formula, per the listing
  • Cleans up with water once prints cool

Cons

  • No warranty term is stated
  • No applicator or spreader is included
  • Each use needs 2 to 3 sprayed layers
LANDU 3D Printing Adhesive

LANDU 3D Printing Adhesive

LANDU9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 150ml bed adhesive for ABS, ASA, PLA and PETG, with a stated 1 Year warranty and water cleanup.

Pros

  • Stated 1 Year warranty in the spec table
  • Optimal at a heated bed of 60℃, per the listing
  • Releases prints once cooled and cleans up with water
  • 150ml bottle for ABS, ASA, PLA and PETG

Cons

  • No safety features are stated
  • No applicator, spreader or spare tip is listed
  • No application count is stated
  • No specific build plate types are named
Anycubic 2 Pcs 60ml 3D Printer Bed Adhesive Glue

Anycubic 2 Pcs 60ml 3D Printer Bed Adhesive Glue

ANYCUBIC9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Two 60ml bottles of bed adhesive for PLA, ABS, PETG and ASA, with up to 100 full-bed applications per bottle.

Pros

  • One 60ml bottle provides up to 100 full-bed applications, per the listing
  • Two bottles in the pack for PLA, ABS, PETG and ASA
  • Washes off with water or a wet rag, with no sticky residue
  • Press applicator head gives a uniform application, per the listing

Cons

  • No warranty term is stated
  • No safety features are stated
  • No bed temperature is stated for any filament
  • No spreader or spare tip is included
3D Printing Super Glue Gel 1.75 oz

3D Printing Super Glue Gel 1.75 oz

3D9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A no-drip CA gel in a 1.76 oz tube for bonding PLA, ABS, PETG, TPU, ASA and nylon parts, with an anti-clog cap.

Pros

  • Bonds PLA, ABS, PETG, TPU, ASA and nylon
  • No-drip gel stays in place on vertical seams and complex joints
  • Withstands temperatures up to 110 °C and humidity, per the listing
  • Up to 5 times more glue than standard bottles, per the listing

Cons

  • No warranty term is stated
  • Bonds parts only; it is not a bed adhesive
  • No setting time is stated in the listing

Other machines to compare

Specs compared

Model HQ Score Type Size PLA bed temp Cleanup Safety Warranty
UniTak3D Bed Adhesive 9.6/10 Bed adhesive 2 x 70ml Not stated Rinses with water Non-toxic, low odor Not stated
DecorRom Bed Spray 9.5/10 Bed adhesive spray 200ml 60-70℃ Water Odorless, non-flammable Not stated
LANDU Bed Adhesive 9.4/10 Bed adhesive 150ml 60℃ Water Not stated 1 Year
Anycubic Bed Glue 9.4/10 Bed adhesive 2 x 60ml Not stated Water Not stated Not stated
3D Super Glue Gel 9.4/10 Part bonding gel 1.76 oz Not stated Not stated Not stated Not stated

Size and performance figures are the brand’s ratings quoted from listings on 3 November 2026.

How the picks were scored

Each adhesive is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing, and a warranty scores only when the listing states a term.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
UniTak3D Bed Adhesive 9.6 30 21 21 3 0
DecorRom Bed Spray 9.5 28 19 20 4 0
LANDU Bed Adhesive 9.4 27 19 19 0 2
Anycubic Bed Glue 9.4 29 21 21 0 0
3D Super Glue Gel 9.4 28 20 18 0 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.

Best adhesive for pla filament: what the listings show

The LANDU, DecorRom, UniTak3D and Anycubic picks are bed adhesives, while the super glue gel bonds finished parts. Each bed adhesive cleans up with water, and each lists PLA among its filaments.

The LANDU listing states a heated bed of 60℃, and the DecorRom listing states PLA at 60-70℃ and ABS at 90-100℃. The UniTak3D and Anycubic listings state no bed temperature.

Bed adhesive sizes run from 60ml bottles to a 200ml container, while the gel comes in a 1.76 oz tube.

Buying guide: adhesive for PLA filament

Bed adhesive or part glue

Start from the job. A bed adhesive grips the print to the plate during printing and releases it once cooled. A part glue bonds printed pieces after printing. The gel is the only pick here for joining parts; the LANDU, DecorRom, UniTak3D and Anycubic picks are bed adhesives.

Match the bed temperature

PLA sticks at lower bed temperatures than ABS. The LANDU listing states a heated bed of 60℃, and the DecorRom listing states PLA at 60-70℃ and ABS at 90-100℃. The UniTak3D and Anycubic listings state no bed temperature, so a reader who wants a stated temperature should look at the LANDU or DecorRom pick.

Cleanup and release

Every bed adhesive here cleans up with water: the LANDU, DecorRom, UniTak3D and Anycubic listings each state water cleanup. The LANDU and DecorRom listings state prints release once cooled.

Spray adhesive needs a different habit: the DecorRom listing says to shake well before use and spray 2 to 3 even layers from 20 to 30 cm away, after cleaning the plate and letting it dry.

Bottle size and coverage

Coverage is stated for one pick only. The Anycubic listing states one 60ml bottle provides up to 100 full-bed applications. The DecorRom container holds 200 milliliters, the LANDU bottle holds 150ml, and the UniTak3D pack holds two 70ml bottles.

Safety

Keep adhesives away from children and avoid contact with mouth and eyes, per the DecorRom listing. Store spray adhesive in a cool, dark place away from fire.

Project Match

Pair the project with the pick whose listing names the materials and work the project needs.

  • Print farms and frequent repairs: the super glue gel, with up to 5 times more glue than standard bottles and a tube built for labs, print farms and high-volume prototyping.
  • Warp-prone PLA prints on a heated bed: the LANDU adhesive, with a heated bed of 60℃ and release once cooled.
  • Spray-on application with stated bed temperatures: the DecorRom spray, with PLA at 60-70℃ and ABS at 90-100℃.
  • Several printer brands in one workshop: the UniTak3D adhesive, compatible with Bambu Lab, Flashforge, Creality, Anycubic and Elegoo printers.
  • A stated application count: the Anycubic glue, with up to 100 full-bed applications per 60ml bottle.

FAQ: lasers and CNC

What is the difference between a bed adhesive and a glue for PLA parts?

A bed adhesive grips the print to the plate during printing and releases it once cooled, while a glue for parts bonds printed pieces after printing. The LANDU, DecorRom, UniTak3D and Anycubic picks are bed adhesives, and the super glue gel bonds finished parts.

What bed temperature works with PLA adhesive?

The LANDU listing states a heated bed of 60℃, and the DecorRom listing states PLA at 60-70℃. The UniTak3D and Anycubic listings state no bed temperature.

How does bed adhesive wash off?

With water. The LANDU, DecorRom, UniTak3D and Anycubic listings each state water cleanup, and the Anycubic listing adds that a wet rag works too.

How many applications come from one bottle?

The Anycubic listing states one 60ml bottle provides up to 100 full-bed applications. The other listings state no application count.

Can PLA adhesive be used with ABS and PETG?

Yes, on the picks whose listings state it. The gel, LANDU, DecorRom, UniTak3D and Anycubic listings each state ABS and PETG among their filaments.

Related: best pla plus filament, glue stick vs hairspray for 3d printing, super glue gel vs liquid for 3d printing, best spray paint for 3d prints and the 3d printers hub.

More buying guides