Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Christmas Glitter Filament (2026)

Glitter PLA for Christmas prints, compared by color, accuracy, nozzle and bed settings, with the stated specs and who should skip each.

Best Christmas Glitter Filament (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1AMOLEN Triple ColorBest OverallAMOLEN Triple Color9.7/10View on Amazon
  2. 2iSANGHU Sky BlueBest for TreesiSANGHU Sky Blue9.6/10View on Amazon
  3. 3HP3DF Glitter WhiteBest WhiteHP3DF Glitter White9.6/10View on Amazon
  4. 4ZIRO Twinkling RedBest RedZIRO Twinkling Red9.6/10View on Amazon

A Christmas tree full of printed ornaments, a mantel lined with glitter stars, a gift box of sparkling snowflakes: glitter filament turns plain PLA prints into holiday pieces. The sparkle comes from glitter powder in the filament, and the color decides whether a print reads as Christmas or just shiny.

This guide covers the best christmas glitter filament, with 5 glitter PLA spools compared by color, accuracy, nozzle and bed settings, and the stated specs for each.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall AMOLEN Triple Color: Highest HQ Score here: triple-color glitter, made for Christmas decorations, ±0.02mm, 1KG Check price on Amazon
  • Best for Trees iSANGHU Sky Blue: Transparent glitter, ideal for Christmas trees per the listing, ±0.02mm, 1 kg, Bambu AMS Check price on Amazon
  • Best White HP3DF Glitter White: Glitter white, virgin PLA, ±0.02mm, vacuum sealed with desiccant, 1KG Check price on Amazon
  • Best Red ZIRO Twinkling Red: Twinkling red glitter, semi-transparent base, 1KG, with a reseal bag and cleaning filament Check price on Amazon

Machines on the list

AMOLEN 3D Printer Filament 1.75mm

AMOLEN 3D Printer Filament 1.75mm

AMOLEN9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Triple-color glitter PLA, black yellow green, 1.75mm, ±0.02mm, 1KG, made for Christmas decorations per the listing.

Pros

  • Made for Christmas decorations, per the listing
  • Triple color with shiny glitter in a spool
  • ±0.02mm accuracy on 1.75mm filament
  • Pre-dried for 24 hours and vacuum-sealed with desiccants

Cons

  • No nozzle or bed settings are stated
  • No print speed is stated
  • No spool dimensions are stated
  • No warranty term is stated
3D Printer Filament PLA HS Glitter Clear Sky Blue

3D Printer Filament PLA HS Glitter Clear Sky Blue

iSANGHU9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Transparent glitter PLA, clear sky blue, 1.75mm, ±0.02mm, 1 kg, for Bambu Lab AMS, ideal for Christmas trees per the listing.

Pros

  • Ideal for Christmas trees, per the listing
  • Transparent with high light transmittance
  • ±0.02mm accuracy on 1.75mm filament
  • Nozzle, bed and speed settings all stated

Cons

  • No warranty term is stated
  • No spool dimensions are stated
  • Blue is not a classic Christmas red or green
  • No nozzle wear guidance is stated
HP3DF Glitter PLA Filament

HP3DF Glitter PLA Filament

HP3DF9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Glitter white PLA, 1.75mm, ±0.02mm, 1KG, virgin PLA, vacuum sealed with desiccant.

Pros

  • 100% virgin PLA with no recycled or filled content
  • ±0.02mm accuracy on 1.75mm filament
  • Vacuum sealed with a desiccant pack
  • Precision winding to reduce tangles

Cons

  • No print speed is stated
  • No Christmas use is named in the listing
  • No warranty term is stated
  • No nozzle wear guidance is stated
ZIRO Glitter PLA Filament 1.75mm

ZIRO Glitter PLA Filament 1.75mm

ZIRO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Twinkling red glitter PLA, 1.75mm, 1KG, semi-transparent base, with a reseal bag and cleaning filament.

Pros

  • Twinkling red, the classic Christmas color
  • Semi-transparent base with bright glitter powder
  • Nozzle, bed and speed settings all stated
  • Includes a reseal bag, 5M cleaning filament and a 5M sample

Cons

  • Title says ±0.03mm while the bullets say ±0.05mm
  • No warranty term is stated
  • No nozzle wear guidance is stated
  • No material purity claim is stated
ZIRO Diamond Series Filament

ZIRO Diamond Series Filament

ZIRO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Diamond-emerald green glitter PLA, 1.75mm, 1KG, with finer and denser glitter powder per the listing.

Pros

  • Finer and denser glitter powder, per the listing
  • Nozzle, bed and speed settings all stated
  • Includes a reseal bag, 5M cleaning filament and a 5M sample
  • Tangle-free mechanical winding, per the listing

Cons

  • No Christmas use is named in the listing
  • No warranty term is stated
  • No nozzle wear guidance is stated
  • No material purity claim is stated

Other machines to compare

Specs compared

Model HQ Score Color Accuracy Nozzle Bed Spool
AMOLEN Triple Color 9.7/10 Black Yellow Green ±0.02mm Not stated Not stated 1KG
iSANGHU Sky Blue 9.6/10 Clear Sky Blue ±0.02mm 190-220°C 35-60°C 1 kg
HP3DF Glitter White 9.6/10 Glitter White ±0.02mm 190-220°C 50-60°C 1KG
ZIRO Twinkling Red 9.6/10 Twinkling Red ±0.03mm 190-220°C 50-60°C 1KG
ZIRO Diamond Green 9.6/10 Diamond-emerald Green ±0.03mm 190-220°C 50-60°C 1KG

Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026.

What the listings tell you, and what they leave out

The listings state diameter, accuracy, nozzle and bed settings, spool size and glitter type, but none states a warranty term, a safety certification or a nozzle wear figure. The AMOLEN listing names Christmas decorations as the use; the iSANGHU listing names Christmas trees. The ZIRO Twinkling Red title says ±0.03mm while its bullets say ±0.05mm, so the accuracy figure is in doubt on that spool.

Buying guide: the best christmas glitter filament

Color: red, green, white or blue

Christmas prints want red, green, white or gold. The ZIRO Twinkling Red is twinkling red, the ZIRO Diamond is diamond-emerald green, the HP3DF is glitter white and the iSANGHU is glitter clear sky blue. The AMOLEN is triple color black yellow green, with shiny black, shiny yellow and shiny green in a spool. See the best glitter 3d filament for more glitter PLA.

Accuracy: ±0.02mm or ±0.03mm

The HP3DF, iSANGHU and AMOLEN list ±0.02mm dimensional accuracy on 1.75mm filament. The ZIRO spools list ±0.03mm in the title, but the Twinkling Red bullets say ±0.05mm. A tighter accuracy figure means steadier feeding; check the listing for the figure before ordering.

Nozzle and bed settings

The HP3DF, iSANGHU and the ZIRO spools list a nozzle range of 190-220°C and a bed range of 50-60°C, except the iSANGHU bed at 35-60°C. The AMOLEN listing states no nozzle or bed settings. The iSANGHU also lists a print speed of 30-100 mm/s; the ZIRO spools list 30-90 mm/s. The AMOLEN listing recommends high strength toughened nozzles to avoid wear on brass nozzles.

Dry storage and vacuum sealing

Glitter PLA is sensitive to moisture. The HP3DF spool is dried before packaging and vacuum-sealed with a desiccant pack; the AMOLEN is pre-dried for 24 hours and vacuum-sealed with desiccants; the iSANGHU uses sealed vacuum bags with desiccant; the ZIRO spools are dried for 24 hours before vacuum sealing. Store the filament in the resealable bag after opening, per the listings. See the best silica gel desiccant packs for 3d printer filament for dry storage.

Nozzle wear from glitter

Glitter powder is abrasive. The AMOLEN listing recommends high strength toughened nozzles to avoid wear on brass nozzles. The other listings state no nozzle wear guidance. If the printer runs brass nozzles, a toughened nozzle is worth checking.

Project Match

  • Christmas tree ornaments: AMOLEN triple color, made for Christmas decorations per the listing.
  • Christmas trees and lampshades: iSANGHU clear sky blue, ideal for Christmas trees per the listing.
  • Snowflakes and white decor: HP3DF glitter white.
  • Red ornaments and gifts: ZIRO Twinkling Red.
  • Green wreaths and garlands: ZIRO Diamond Green.

How the scores add up

The HQ Score weighs performance (color, glitter and stated print settings), build quality (accuracy, winding and packaging), value (spool size and what the listing states) and warranty (years and coverage). No listing states a safety certification, so safety earns no points on any pick. A factor the listing does not state scores no points.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
AMOLEN Triple Color 9.7 32 21 21 n/a 0
iSANGHU Sky Blue 9.6 30 21 20 n/a 0
HP3DF Glitter White 9.6 29 21 20 n/a 0
ZIRO Twinkling Red 9.6 28 20 21 n/a 0
ZIRO Diamond Green 9.6 28 20 20 n/a 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.

FAQ: lasers and CNC

What is glitter filament?

Glitter filament is PLA with glitter powder mixed in, so prints sparkle. The picks here are 1.75mm glitter PLA in white, blue, triple color, green and red, with dimensional accuracy of ±0.02mm or ±0.03mm.

Does glitter filament work in most FDM printers?

Yes, per the listings: all 5 spools fit most FDM 3D printers that use 1.75mm filament. The iSANGHU also fits Bambu Lab AMS. The AMOLEN listing recommends high strength toughened nozzles to avoid wear on brass nozzles.

What nozzle temperature does glitter PLA need?

The HP3DF, iSANGHU and the ZIRO spools list a nozzle range of 190-220°C. The AMOLEN listing states no nozzle settings. The HP3DF also lists a bed range of 50-60°C.

Can I print Christmas ornaments with glitter filament?

Yes: the AMOLEN listing names Christmas decorations as the use, and the iSANGHU listing names Christmas trees. The ZIRO Twinkling Red and Diamond Green suit red and green ornaments. Store the filament dry after opening, per the listings.

How do I store glitter filament?

Keep it dry: the HP3DF, AMOLEN, iSANGHU and the ZIRO spools ship vacuum-sealed with desiccant, and the listings say to store the filament in the resealable bag after opening. The ZIRO spools include a free reseal bag.

Related: the best glitter 3d filament, the best silica gel desiccant packs for 3d printer filament, our best tools to clean up 3d prints and our 3d printers hub.

More buying guides

3D Printers ·

Best Glitter PLA Filament (2026)

Five glitter PLA spools compared by glitter effect, colour change, diameter accuracy, drying and warranty, for decorations, gifts and glowing lamps.