Best Fep Film Under $25 (2026): 5 Films Compared
Five FEP films for resin printers, compared by size, thickness, transmittance, printer fit and pack size.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallComgrow FEP Film 6PCS9.6/10View on Amazon - 2
Best 6-PackKOYOFEI FEP Film 6PCS9.6/10View on Amazon - 3
Best NFEPSiraya Tech NFEP Film9.5/10View on Amazon - 4
Best 5-PackANYCUBIC FEP Film 5PCS9.5/10View on Amazon - 5
Best for Mono 4ANYCUBIC FEP Film 2PCS9.5/10View on Amazon
A resin print that sticks to the film instead of the build plate wastes an afternoon and a vat of resin, and a cloudy or torn film turns the next print into a failed layer. The film at the bottom of the vat is the part that lets each layer release cleanly, and the best fep film under $25 is the one that fits the printer, lets the light through and releases the print. This guide compares the films below by size, thickness, transmittance and printer fit.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Comgrow FEP Film 6PCS: 6 films at 260 x 200 x 0.15 mm, over 95% transmittance and a 205°C working temperature. Check price on Amazon
- Best 6-Pack KOYOFEI FEP Film 6PCS: 6 films at 210 x 150 x 0.15 mm with 95% light transmission for Mars and Mono printers. Check price on Amazon
- Best NFEP Siraya Tech NFEP Film: A4 NFEP film with fewer layer lines and faster printing for LCD and DLP printers. Check price on Amazon
- Best 5-Pack ANYCUBIC FEP Film 5PCS: 5 films with an integrated ring for Photon Mono 2, installed in 3 minutes. Check price on Amazon
- Best for Mono 4 ANYCUBIC FEP Film 2PCS: 2 films with an integrated ring for Photon Mono 2, Mono 4 and Mono 4 Ultra. Check price on Amazon
Machines on the list

6PCS Creality FEP Film Release Films 260 x 200 x
A 6-pack of FEP film, 260 x 200 x 0.15 mm with over 95% transmittance, for Saturn, Mars 3 Pro and Photon Mono X printers.
Pros
- 260 x 200 x 0.15 mm, the largest size here
- Over 95% transmittance
- Long-term working temperature of 205°C, melting point 260°C
- Wide fit: Saturn, Mars 3 Pro, Photon Mono X and Phrozen printers
Cons
- No warranty term stated
- No safety listing stated
- No stated install time

KOYOFEI 6 PCS FEP Film 3D Printer Accessories
A 6-pack of FEP film, 210 x 150 x 0.15 mm with 95% light transmission, for Mars 4, Mars 5 and Photon Mono printers.
Pros
- 210 x 150 x 0.15 mm with 95% light transmission
- Fits Mars 4, Mars 5 and Photon Mono 2, Mono 4 and Mono 4 Ultra
- Good peeling performance and stable release force
- Corrosion resistant against strong acids, alkalis and oxidants
Cons
- No warranty term stated
- No safety listing stated
- No stated install time
- No stated working temperature

Siraya Tech 2 Pcs NFEP Film Fewer Layer
A 2-pack of A4 NFEP film, 210 x 297 mm, with fewer layer lines and faster printing for LCD and DLP printers.
Pros
- A4 size, 210 x 297 mm
- Fewer layer lines than standard FEP, per the listing
- Faster printing with ultra-high UV transmittance
- Developed for laser SLA and large-format MSLA
Cons
- No thickness stated
- No transmittance figure stated, only ultra-high
- No warranty term stated
- Only 2 films in the pack

Anycubic FEP Film 5PCS for Photon Mono 2
A 5-pack of FEP film with an integrated ring for Photon Mono 2, installed in 3 minutes with a tutorial on the package.
Pros
- 5 films with an integrated ring, no cutting needed
- Installs in 3 minutes with a tutorial on the package
- Made for Photon Mono 2
- Regular replacement makes printing better, per the listing
Cons
- No film size in millimetres stated
- No thickness stated
- No transmittance stated
- No warranty term stated

ANYCUBIC FEP Film 2pcs for Photon Mono 2/Photon
A 2-pack of FEP film with an integrated ring for Photon Mono 2, Mono 4 and Mono 4 Ultra, installed in 3 minutes.
Pros
- Integrated ring, no cutting needed
- Installs in 3 minutes with a tutorial on the package
- Fits Photon Mono 2, Mono 4 and Mono 4 Ultra
- Regular replacement makes printing better, per the listing
Cons
- Not for the fast printing model, per the listing
- Mono 4 series needs normal speed, per the listing
- No film size in millimetres stated
- No thickness or transmittance stated
Other machines to compare
KOYOFEI 6 PCS A4 Size FEP FilmCheck price on Amazon
KOYOFEI 6 PCS FEP Film for Resin 3D PrinterCheck price on Amazon
6PCS Creality FEP Film Release Films 200 x 140 x 0.15mm forCheck price on Amazon
Antinsky nFEP PFA Release Film 280 * 450mm 1pc for PhrozenCheck price on Amazon
290x210x0.15mm Fep Film for ELEGOO Saturn 3/4 SeriesCheck price on Amazon
Specs compared
| Model | HQ Score | Type | Size | Thickness | Transmittance | Pack | Warranty |
|---|---|---|---|---|---|---|---|
| Comgrow FEP Film 6PCS | 9.6/10 | FEP film | 260 x 200 mm | 0.15 mm | Over 95% | 6 pcs | Not stated |
| KOYOFEI FEP Film 6PCS | 9.6/10 | FEP film | 210 x 150 mm | 0.15 mm | 95% | 6 pcs | Not stated |
| Siraya Tech NFEP Film | 9.5/10 | NFEP film | 210 x 297 mm | Not stated | Not stated | 2 pcs | Not stated |
| ANYCUBIC FEP Film 5PCS | 9.5/10 | FEP film | Not stated | Not stated | Not stated | 5 pcs | Not stated |
| ANYCUBIC FEP Film 2PCS | 9.5/10 | FEP film | Not stated | Not stated | Not stated | 2 pcs | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026.
What the listings tell you
We read 5 film listings. Only 2 stated a thickness, 2 stated a transmittance figure, and none stated a warranty term or a safety listing. Two listings gave no film size in millimetres.
Buying guide: the best fep film under $25 for resin printing
Size and printer fit
Size is the first check: the film must cover the vat. The Comgrow film is 260 x 200 mm for Saturn, Mars 3 Pro and Photon Mono X printers, the KOYOFEI film is 210 x 150 mm for Mars 4, Mars 5 and Photon Mono printers, and the Siraya NFEP is A4 size, 210 x 297 mm, for LCD and DLP printers. The Anycubic films state no size in millimetres, only inches, so check the listing against the printer model before buying.
Thickness and transmittance
Thickness and transmittance decide how much UV light reaches the resin. The KOYOFEI and Comgrow films both list a thickness of 0.15 mm, with 95% and over 95% transmittance. The Siraya NFEP claims ultra-high UV transmittance with no figure stated, and the Anycubic listings state no thickness and no transmittance.
Release and durability
Release is how cleanly each cured layer leaves the film. The KOYOFEI, Siraya and Comgrow listings all claim good peeling or stable release force, the KOYOFEI adds corrosion resistance, and the Comgrow lists a long-term working temperature of 205°C with a melting point of 260°C. The Siraya NFEP adds fewer layer lines and faster printing, per its listing.
Pack size and replacement
FEP film is a consumable, so pack size matters. The KOYOFEI and Comgrow packs hold 6 films, the Anycubic 5-pack holds 5, and the Siraya and Anycubic 2-packs hold 2. The Anycubic films come with an integrated ring and install in 3 minutes, with no need to disassemble the ring and cut the film.
Project Match
- Small Mars and Mono prints: the KOYOFEI 210 x 150 mm film fits Mars 4, Mars 5 and Photon Mono 2, Mono 4 and Mono 4 Ultra.
- Larger Saturn and Photon Mono X prints: the Comgrow 260 x 200 mm film fits Saturn, Mars 3 Pro and Photon Mono X printers.
- Large-format MSLA and laser SLA: the Siraya NFEP was developed for laser SLA printers and large-format MSLA.
- Quick film swaps on a Photon Mono 2: the Anycubic films come with a ring and install in 3 minutes.
- Not stated: the Anycubic listings state no film size in millimetres, so check the vat size before buying.
How the scores add up
Each film is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None states a safety listing, so all score zero on safety, and none states a warranty term, so all score zero on warranty.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Comgrow FEP Film 6PCS | 9.6 | 30 | 21 | 21 | n/a | 0 |
| KOYOFEI FEP Film 6PCS | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Siraya Tech NFEP Film | 9.5 | 29 | 20 | 19 | n/a | 0 |
| ANYCUBIC FEP Film 5PCS | 9.5 | 27 | 20 | 20 | n/a | 0 |
| ANYCUBIC FEP Film 2PCS | 9.5 | 27 | 20 | 18 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.
FAQ: lasers and CNC
What is FEP film?
FEP film is the clear film at the bottom of a resin printer vat. It lets UV light through to harden each layer and lets the hardened layer release from the vat so the next layer can print.
How often should I replace FEP film?
The Anycubic listings call the film a consumable and say regular replacement makes printing better, so treat it as a part that wears out and keep a spare pack on hand.
Does FEP film fit any resin printer?
No. The KOYOFEI film fits Elegoo Mars 4, Mars 5 and Photon Mono printers, the Comgrow film fits Saturn, Mars 3 Pro and Photon Mono X printers, and the Anycubic films fit Photon Mono 2 and Mono 4. Check the listing against the printer model before buying.
What thickness is FEP film?
The KOYOFEI and Comgrow films list a thickness of 0.15 mm. The Siraya and Anycubic listings state no thickness.
Related: the best FEP film, the best 3D printing resins, our 3D printer types guide and our best UV resin for 3D prints. Also see our best magnetic flexible spring steel build plate for resin 3D printer. Also see our SLA vs DLP 3D printer.




