SLA vs DLP 3D Printer: Which One Should You Buy?
SLA traces each layer with a laser while DLP flashes a whole layer with a projector, and this guide compares the two methods and two resin printers by build size and resolution.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ANYCUBIC Upgraded Standard 3D Printer Resin9.7/10View on Amazon - 2
ANYCUBIC Tough Resin 2.09.6/10View on Amazon - 3
SUNLU 3D Printer Resin9.6/10View on Amazon - 4
SUNLU 3000G ABS-Like 3D Printer ResinView on Amazon - 5
SUNLU 2000G ABS-Like 3D Printer ResinView on Amazon - 6
SUNLU 1000G ABS Like Resin for 3D PrinterView on Amazon - 7
SUNLU ABS-Like 3D Printer ResinView on Amazon - 8
Siraya Tech Fast ABS-Like Tough 3D Printer ResinView on Amazon - 9
SUNLU 3D Printer Resin 1kgView on Amazon
The sla vs dlp 3d printer question comes down to how each method hardens liquid resin with light. SLA traces each layer with a laser spot, one point at a time, while DLP flashes a whole layer at once with a digital projector. That difference sets speed, detail, and cost, and the sections below walk through how each one works, where each one fits, and the resin printers to compare.
Other machines to compare
SUNLU 3000G ABS-Like 3D Printer ResinCheck price on Amazon
SUNLU 2000G ABS-Like 3D Printer ResinCheck price on Amazon
SUNLU 1000G ABS Like Resin for 3D PrinterCheck price on Amazon
SUNLU ABS-Like 3D Printer ResinCheck price on Amazon
Siraya Tech Fast ABS-Like Tough 3D Printer ResinCheck price on Amazon
SUNLU 3D Printer Resin 1kgCheck price on Amazon
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Resin printing needs a ventilated workspace and care with liquid resin. This guide compares the two light methods and two resin printers; follow each maker’s handling guidance for the resin you use.
How SLA works
SLA, or stereolithography, hardens liquid resin with a laser. The laser traces each layer point by point, following the shape of the slice, then the build platform moves and the next layer is traced. Because the laser draws the shape, detail comes from how fine the laser spot is and how steady the platform moves. SLA suits small, detailed parts where the laser can trace fine features.
How DLP works
DLP, or digital light processing, hardens a whole layer at once with a digital projector. The projector flashes the image of the slice onto the resin surface, so every point in the layer hardens at the same time. Detail comes from the projector’s pixels: smaller pixels mean finer features. DLP suits layers with a lot of area, since the whole layer takes the same flash whether it holds one part or many.
Speed: tracing vs flashing
Speed is where the two methods part ways. SLA traces each layer, so a layer with more area takes more time. DLP flashes the whole layer at once, so a full layer takes about the same time as a sparse one.
Detail and surface finish
Both methods can hold fine detail. The featured LCD printers show how makers state detail: the Phrozen listing states 43 µm XY resolution on a 15 inch 8K mono LCD, and the Anycubic listing states a 10.1 inch mono LCD with LighTurbo 4.0, an aspherical Fresnel lens with a light angle within 2 degrees, and over 92 percent illumination uniformity. Surface finish also depends on the release film: the Anycubic listing states wave release technology reduces release force by over 60 percent compared with smooth NFEP release films, for smooth demolding and stable forming.
SLA vs DLP 3D printer: which one should you buy?
Choose SLA if your work is small, detailed parts and you want a laser-traced finish. Choose DLP if you print full layers and want the speed of a whole-layer flash. If you print batches of miniatures or large parts, a big build plate matters more than the method: the Phrozen listing states a 33 by 18.5 by 30 cm build plate. If you want out-of-the-box leveling and a stated warranty, the Anycubic listing states auto-leveling 3.0 with a pre-print self-check and a 12 month warranty, with the LCD screen for 6 months.
The gear: two resin printers to compare
The Anycubic Photon P1 14K is a 10.1 inch mono LCD printer with auto-leveling 3.0 and a printing size of 8.79 by 4.96 by 9.05 in. Industrial ball screws and precision guide rails hold the build platform to a flatness tolerance of less than 80 µm, and an 8 mm copper cooling system keeps output steady. LighTurbo 4.0 pairs an aspherical Fresnel lens with a light angle within 2 degrees and over 92 percent illumination uniformity. Wave release technology reduces release force by over 60 percent compared with smooth NFEP release films. AI detection checks the build plate and bottom layer separation, and resin level and residue detection help prevent failed prints. The listing states a 12 month warranty, with the LCD screen for 6 months.
The Phrozen Sonic Mega 8K S is a 15 inch 8K mono LCD printer with 43 µm XY resolution and a build plate of 33 by 18.5 by 30 cm. The listing states it can print 80 detailed 1/32 scale miniatures in under 1.5 hours, and ACF film with TR300 high-speed resin for printing speeds up to 10 times faster than standard mid-size printers. A lift-up lid gives access in tight spaces, and a built-in metal drip hanger lets excess resin flow back into the vat. The printer weighs 57.3 lb. The listing states the warranty as a referral to the Phrozen official website, with no term stated.
Between the two, the Anycubic leads on stated precision features and warranty, while the Phrozen leads on build size and batch output.
Common mistakes to avoid
Do not pick a method before you pick a part: match the printer to the size and detail of what you print. Do not ignore build size: a small printer cannot print a large part in one piece, and the Anycubic printing size is 8.79 by 4.96 by 9.05 in while the Phrozen build plate is 33 by 18.5 by 30 cm. Do not skip ventilation: resin printing needs a ventilated workspace. Do not assume a warranty: the Phrozen listing states no term, only a referral to the official website.
SLA vs DLP 3D printer: the short version
SLA traces each layer with a laser; DLP flashes a whole layer with a projector. DLP is faster for full layers, and SLA is a steady choice for small detailed parts. Both printers featured here are mono LCD resin machines: the Anycubic Photon P1 14K for precision and a stated 12 month warranty, and the Phrozen Sonic Mega 8K S for a large build plate and batch output.
FAQ: lasers and CNC
Is SLA or DLP faster?
DLP usually wins on speed for full layers, since it exposes the whole layer at once, while SLA traces each point.
Which gives finer detail, SLA or DLP?
Both can hold fine detail. SLA detail comes from how fine the laser spot is, and DLP detail comes from the projector’s pixels.
Do SLA and DLP printers use the same resin?
Both use liquid resin, and each maker names its own resins: the Anycubic listing states engineering resin compatibility, and the Phrozen listing names TR300 high-speed resin.
Can I print large models with SLA or DLP?
Build size varies by machine. The Phrozen listing states a 33 by 18.5 by 30 cm build plate, and the Anycubic listing states a printing size of 8.79 by 4.96 by 9.05 in.
Which resin printer should a beginner choose?
Pick the one whose stated features match your work: the Anycubic listing states auto-leveling 3.0 with a pre-print self-check, while the Phrozen listing states a lift-up lid and a built-in metal drip hanger.
What warranty do these printers carry?
The Anycubic listing states 12 months, with the LCD screen for 6 months. The Phrozen listing states to refer to the Phrozen official website, with no term stated.
Related: the 3D printer hub, best 3D printing resins and best FEP film. Also see our best 3D print removal tool. Also see our how to choose a laser engraver.




