Best 3D Printing Resins (2026): 5 Picks for Makers
Five standard and ABS-like resins compared for resin 3D printers, by strength, curing, odor and size, with the HQ Score for each pick.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallANYCUBIC ABS-Like Pro 29.7/10View on Amazon - 2
Best Tough ResinELEGOO ABS-Like 3.0+9.7/10View on Amazon - 3
Best Fast ResinSiraya Tech Fast9.6/10View on Amazon - 4
Best Standard ResinELEGOO 8K Standard9.6/10View on Amazon
A resin printer turns a bottle of liquid into parts with fine detail, from tabletop models to prototype parts for a small shop. The resin decides how tough the part is, how clean the surface looks and how the print holds up after curing. This guide compares the best 3d printing resins for makers and small businesses, using only what each listing states: type, size, curing, odor and strength.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall ANYCUBIC ABS-Like Pro 2: Elongation at break 35-40%, up 114% on the earlier ABS-like resin Check price on Amazon
- Best Tough Resin ELEGOO ABS-Like 3.0+: 2000g bottle, heat resistance up to 55 celsius, tapped and drilled without cracking Check price on Amazon
- Best Fast Resin Siraya Tech Fast: Fast curing, non-brittle, 8K capable, easy to clean Check price on Amazon
- Best Standard Resin ELEGOO 8K Standard: Low shrinkage 8K resin for 8K to 16K printers, low odor Check price on Amazon
Machines on the list

ANYCUBIC 3D Printer Resin
ABS-like resin with elongation at break of 35-40%, up 114% on the earlier ABS-like resin, for high-strength models.
Pros
- Elongation at break 35-40%
- 114% higher than ABS-like resin +
- High fluidity for fast reflow
- Low odor formula
Cons
- No warranty term is stated
- No weight or dimensions stated
- No curing wavelength stated
- Grey only in this listing

ELEGOO ABS-Like 3.0+ 3D Printer Resin Grey 2000g
ABS-like resin in a 2000g bottle with heat resistance up to 55 celsius, high strength and fast curing.
Pros
- Heat resistance up to 55 celsius
- 2000g bottle, the largest here
- Tapped and drilled without cracking
- Fast curing with high precision
Cons
- No warranty term is stated
- No curing wavelength stated
- No odor statement
- Grey only in this listing

Siraya Tech Fast ABS-Like 3D Printer Resin
Fast ABS-like resin in navy grey, non-brittle, 405nm curing, 8K capable, with low odor and easy cleaning.
Pros
- Non-brittle, strong enough for an accidental fall
- 8K capable
- Low odor and easy to clean
- Matte finish shows more detail
Cons
- No warranty term is stated
- Navy grey only in this listing
- No heat resistance figure stated
- No elongation figure stated

ELEGOO Upgraded 8K Standard 3D Printer Resin Space
Standard 8K resin in space grey, 1000g, 405nm curing, with low shrinkage, low viscosity and low odor.
Pros
- Low shrinkage and high precision
- Low viscosity and good fluidity
- Low odor formula
- For 8K to 16K printers
Cons
- No warranty term is stated
- Standard resin, not ABS-like tough
- No strength figure stated
- Space grey only in this listing

ANYCUBIC 3D Printer Resin
Standard 405nm resin in grey, 1kg, with low shrinkage, quick curing and universal DLP and LCD compatibility.
Pros
- Compatible with all DLP and LCD printers
- Quick curing with low shrinkage
- Rigidity and toughness for easy removal
- Bottle packed in bubble wrap with an air bag
Cons
- No warranty term is stated
- No strength figure stated
- Needs a full shake before use
- Grey only in this listing
Other machines to compare
ELEGOO Standard 3D Printer Resin Grey 1000gCheck price on Amazon
ELEGOO Upgraded 8K Standard 3D Printer Resin Space Grey 2000gCheck price on Amazon
ELEGOO Upgraded 8K Standard 3D Printer Resin Space Grey 3000gCheck price on Amazon
ELEGOO 8K ABS-Like 3.0 3D Printer Resin Space Grey 2000gCheck price on Amazon
SUNLU 14K ABS-Like 3D Printer Resin 3000GCheck price on Amazon
Specs compared
| Model | HQ Score | Type | Size | Curing | Odor | Warranty |
|---|---|---|---|---|---|---|
| ANYCUBIC ABS-Like Pro 2 | 9.7/10 | ABS-like | 1kg | Not stated | Low odor | Not stated |
| ELEGOO ABS-Like 3.0+ | 9.7/10 | ABS-like | 2000g | Not stated | Not stated | Not stated |
| Siraya Tech Fast | 9.6/10 | ABS-like | 1kg | 405nm | Low odor | Not stated |
| ELEGOO 8K Standard | 9.6/10 | Standard | 1000g | 405nm | Low odor | Not stated |
| ANYCUBIC Standard | 9.6/10 | Standard | 1kg | 405nm | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 3 November 2026. None of the listings states a warranty term, so all five score zero for warranty.
What the listings tell you, and what they leave out
The ELEGOO 8K, the ANYCUBIC standard resin and the Siraya Tech Fast state 405nm curing. The ELEGOO ABS-Like 3.0+ and the ANYCUBIC Pro 2 do not state a wavelength. No listing states a warranty term. The ANYCUBIC Pro 2 states no weight or dimensions, and the ELEGOO ABS-Like 3.0+ states no odor figure. Strength figures vary: only the ANYCUBIC Pro 2 states an elongation figure, 35-40%, and only the ELEGOO ABS-Like 3.0+ states a heat figure, up to 55 celsius.
Buying guide: the best 3d printing resins
Standard or ABS-like
Standard resins suit detail work: the ELEGOO 8K lists low shrinkage and high precision with a smooth finish, and the ANYCUBIC standard resin lists low shrinkage with quick curing. ABS-like resins suit parts that take handling: the ELEGOO ABS-Like 3.0+ lists high strength and impact resistance, the Siraya Tech Fast lists stiffness and toughness with no brittleness, and the ANYCUBIC Pro 2 lists strength and toughness for structural parts. Pick standard for looks and ABS-like for parts that work.
Size and weight
The ELEGOO ABS-Like 3.0+ comes in a 2000g bottle, the largest here, and weighs 4.41 pounds. The other bottles are 1000g or 1kg: the ELEGOO 8K at 1000g, the ANYCUBIC standard resin at 1kg, the Siraya Tech Fast at 1kg and the ANYCUBIC Pro 2 at 1kg. A larger bottle suits a busy printer; a 1kg bottle suits a first try of a new resin.
Odor and cleaning
The ELEGOO 8K, the Siraya Tech Fast and the ANYCUBIC Pro 2 list low odor formulas. The Siraya Tech Fast lists easy cleaning with an air gun and alcohol spray, and the ELEGOO 8K lists good fluidity for quick reflow. The ANYCUBIC standard resin asks for a full shake before use, or uneven coloring may occur. Work with ventilation and follow the resin safety sheet.
Strength figures
Only the ANYCUBIC Pro 2 states an elongation figure: elongation at break of 35-40%, up 114% on the earlier ABS-like resin +. The ELEGOO ABS-Like 3.0+ states heat resistance up to 55 celsius and models that can be tapped and drilled without cracking. The other listings state toughness in words, not figures: the Siraya Tech Fast lists stiffness and toughness, and the ANYCUBIC standard resin lists rigidity and toughness. Figures beat adjectives when the part has to hold up.
Project Match
- Tabletop models: the Siraya Tech Fast lists tabletop models and industrial parts.
- Structural parts and fixtures: the ANYCUBIC Pro 2 lists structural parts, industrial prototype parts and fixtures.
- Parts that take heat: the ELEGOO ABS-Like 3.0+ holds shape up to 55 celsius.
- High-detail models: the ELEGOO 8K lists 8K to 16K printers.
- Models that get tapped or drilled: the ELEGOO ABS-Like 3.0+ lists tapping and drilling without cracking.
How the scores add up
Each resin is scored out of 10 on performance, build, value, safety and warranty, using only what the listing publishes.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ANYCUBIC ABS-Like Pro 2 | 9.7 | 33 | 22 | 21 | n/a | 0 |
| ELEGOO ABS-Like 3.0+ | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Siraya Tech Fast | 9.6 | 30 | 21 | 21 | n/a | 0 |
| ELEGOO 8K Standard | 9.6 | 29 | 21 | 20 | n/a | 0 |
| ANYCUBIC Standard | 9.6 | 28 | 20 | 20 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.
FAQ: lasers and CNC
Why is my resin 3D printer not printing?
The listings point to a few causes: the ANYCUBIC standard resin asks for a full shake before use, or uneven coloring may occur; the ELEGOO 8K lists low viscosity and good fluidity for reflow between the model and the release film; the ANYCUBIC Pro 2 lists fast reflow that reduces delamination. Check the resin, the film and the printer settings in the manual.
Is resin 3D printing food safe?
None of the listings here states food safety, so do not assume a print is food safe. The listings describe models, parts and prototypes, not food contact.
Is resin 3D printing toxic?
The listings do not state toxicity figures. The ELEGOO 8K, Siraya Tech Fast and ANYCUBIC Pro 2 list low odor formulas, and the ELEGOO 8K lists a safe and low odor formula. Work with ventilation and follow the resin safety sheet.
Is resin 3D printing worth it?
For fine detail, the listings say yes in their own terms: the ELEGOO 8K lists high precision with a smooth finish for 8K to 16K printers, and the Siraya Tech Fast lists high resolution and a smooth surface. Worth depends on the parts: the Pro 2 lists structural parts and fixtures, the Siraya lists tabletop models and industrial parts.
How to get started resin 3D printing?
Start with a standard resin and the printer the listing names: the ELEGOO 8K lists Saturn MSLA DLP LCD printers, and the ANYCUBIC standard resin works with all DLP and LCD printers. Shake the bottle before use, per the ANYCUBIC listing, and clean the print after printing, per the ELEGOO 8K listing.
Related: 3D printer types, FDM, resin and SLA, best UV resin for 3D prints, is a 3D printer worth it, 3D printer maintenance, 3D printer filament types and the 3D printers hub.




