Best Uv Resin for 3d Prints (2026): 4 Picks Compared
4 UV resins for 3D prints, compared by shrinkage, precision, toughness, odor and packaging.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSUNLU Standard 4kg9.6/10View on Amazon - 2
Best for MiniaturesSUNLU ABS-Like 2kg9.6/10View on Amazon - 3
Best BundleANYCUBIC 4x1kg Bundle9.5/10View on Amazon - 4
Best for Small RunsELEGOO Standard 1kg9.5/10View on Amazon
A resin print starts as a bottle of liquid and ends as a miniature, a jewelry piece or a replacement part with a smooth finish. The best uv resin for 3d prints gives low shrinkage and high precision, so the model comes out the size the design calls for. This guide compares the resins by shrinkage, precision, toughness, odor and packaging.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall SUNLU Standard 4kg: 4000g of standard resin at 395 to 405 nm, compatible with 99% of printers and easy to clean. Check price on Amazon
- Best for Miniatures SUNLU ABS-Like 2kg: ABS-like resin, less brittle and tougher, for miniatures and tiny objects at 405 nm. Check price on Amazon
- Best Bundle ANYCUBIC 4x1kg Bundle: 4 packs of 1kg grey resin, 4kg in total, for all DLP and LCD printers. Check price on Amazon
- Best for Small Runs ELEGOO Standard 1kg: 1000g of standard grey resin at 405 nm, with low shrinkage and high precision. Check price on Amazon
Machines on the list

SUNLU 3D Printer Resin 4kg
A 4000g bottle of standard resin for most resin 3D printers, working at 395 to 405 nm with low shrinkage, high precision and minimal odor.
Pros
- 4000g bottle for long print runs
- Works at 395 to 405 nm on LCD, DLP and SLA printers
- Cleans with isopropyl alcohol or ethanol
- Minimal odor and a leak-proof bottle
Cons
- No warranty term is stated
- No dimensions are stated
- Standard resin, less tough than the ABS-like pick

SUNLU 2000G ABS-Like 3D Printer Resin
A 2000g bottle of ABS-like resin for 2K to 8K LCD, DLP and SLA printers, less brittle than standard resin with low shrinkage and high precision.
Pros
- Less brittle and tougher than standard resin
- Suits miniatures and tiny objects
- Low shrinkage and high precision
- Very light odor and a leak-proof bottle
Cons
- No warranty term is stated
- Model field reads Water-Wash ABS Resin against a standard ABS-like title
- No stated print speed
- 2000g bottle, smaller than the 4000g standard resin here

ANYCUBIC 3D Printer Resin Bundle
A bundle of 4 packs of 1kg grey resin, 4kg in total, for all DLP and LCD printers, with low shrinkage, high precision and a mix of hardness and toughness.
Pros
- 4kg in total across 4 packs of 1kg
- Compatible with all DLP and LCD printers
- Hardness and toughness together for easy removal
- Low shrinkage and high precision
Cons
- No warranty term is stated
- No weight or dimensions are stated
- Shake before use, or the color may come out uneven

ELEGOO Standard 3D Printer Resin Grey 1000g
A 1000g bottle of standard grey resin for 405 nm LCD 3D printers, with low shrinkage, high precision and bright, pure colors.
Pros
- 1000g bottle for small print runs
- Low shrinkage and high precision
- Bright, pure colors from quality pigments
- Leak-proof bottle in a bubble bag
Cons
- No warranty term is stated
- 1000g bottle, less resin than the 2000g and 4000g bottles here
- Works best with LCD printers, a narrower range than the 99% claim of the SUNLU 4kg
- No stated odor level
Other machines to compare
ELEGOO 8K Water-Washable 2.0 3D Printer Resin Red Clay 2000gCheck price on Amazon
ELEGOO Saturn 4 12K Resin 3D PrinterCheck price on Amazon
ELEGOO Saturn 4 Ultra 16K Resin 3D PrinterCheck price on Amazon
ANYCUBIC Photon Mono 4Check price on Amazon
ELEGOO Saturn 4 Ultra 12K MSLA Resin 3D PrinterCheck price on Amazon
SuperCast 8K 3D Print Resin Wax Filled Jewelry Metal CastingCheck price on Amazon
Specs compared
| Model | HQ Score | Size | Wavelength | Compatibility | Odor | Packaging | Warranty |
|---|---|---|---|---|---|---|---|
| SUNLU Standard 4kg | 9.6/10 | 4000g | 395 to 405 nm | 99% of printers | Minimal odor | Leak-proof bottle | Not stated |
| SUNLU ABS-Like 2kg | 9.6/10 | 2000g | 405 nm | 2K 4K 6K 8K LCD/DLP/SLA | Very light odor | Leak-proof bottle | Not stated |
| ANYCUBIC 4x1kg Bundle | 9.5/10 | 4kg in 4 packs | 405 nm | All DLP/LCD | Not stated | Bubble wrap, air bag | Not stated |
| ELEGOO Standard 1kg | 9.5/10 | 1000g | 405 nm | Most DLP/LCD | Not stated | Leak-proof bottle | Not stated |
Specifications are manufacturer stated, as published on each listing and collected 3 November 2026. Wavelength is the UV light the resin is made for.
What the listings tell you, and what they leave out
We read 4 resin listings for this guide. All 4 state a 405 nm wavelength, and all 4 state low shrinkage and high precision. 2 state a low or minimal odor, and all but 1 state a leak-proof bottle. None states a warranty term, and none states a print speed or a layer height.
Buying guide: best uv resin for 3d prints
Standard vs ABS-like
Standard resin prints hard, smooth parts with low shrinkage. ABS-like resin is less brittle and tougher, with better abrasion resistance, which suits miniatures and tiny objects that need to survive handling. See the abs-like vs standard resin comparison for the full trade-off.
Wavelength: 405 nm
All 4 resins here work at 405 nm, and the SUNLU 4kg listing also gives a 365 to 405 nm range in a bullet. Match the wavelength to the printer: the listings here state compatibility with LCD, DLP and SLA printers at 405 nm.
Size: 1000g to 4000g
The bottles here run from 1000g to 4000g. A 1000g bottle suits small print runs, while a 4000g bottle suits long runs and many parts. The ANYCUBIC bundle splits 4kg across 4 packs of 1kg, so each pack stays sealed until you need it.
Odor and packaging
The SUNLU ABS-like resin states a very light odor, and the SUNLU 4kg resin states a minimal odor. The ELEGOO, SUNLU ABS-like and SUNLU 4kg listings state a leak-proof bottle, and the ANYCUBIC bundle comes packed in bubble wrap with an air bag. Clean prints with isopropyl alcohol or ethanol, as the isopropyl alcohol vs resin cleaner guide explains.
Resin is a liquid photopolymer that sets under UV light. The listings here state low or minimal odor and leak-proof bottles. Clean prints with isopropyl alcohol or ethanol, as the SUNLU listing states.
Project Match
- Miniatures and tiny objects: SUNLU ABS-Like 2kg, which the listing calls the first choice for miniatures.
- Large print runs: SUNLU Standard 4kg, the 4000g bottle here.
- Standard prints on any DLP or LCD printer: ANYCUBIC 4x1kg Bundle, compatible with all DLP and LCD printers.
- Detailed models with a smooth finish: ELEGOO Standard 1kg, low shrinkage and high precision.
How the scores add up
Each resin is scored on performance, build, value, safety and warranty. How we pick explains the weights. A leak-proof bottle and low odor earn safety points, and a stated warranty term earns warranty points; none of these listings states a warranty term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SUNLU Standard 4kg | 9.6 | 30 | 21 | 22 | 4 | 0 |
| SUNLU ABS-Like 2kg | 9.6 | 30 | 21 | 21 | 4 | 0 |
| ANYCUBIC 4x1kg Bundle | 9.5 | 29 | 20 | 21 | 3 | 0 |
| ELEGOO Standard 1kg | 9.5 | 28 | 20 | 19 | 3 | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total.
FAQ: lasers and CNC
Do you need a UV light for resin?
The listings state these resins work at 405 nm, which is the UV wavelength that sets the resin. A printer with a 405 nm light source matches what the listings state.
Can UV resin set without a UV lamp?
These are UV photopolymer resins, and the listings state they work at 405 nm. Without UV light at that wavelength, the resin does not set.
How do you use UV resin for 3D prints?
Shake the bottle before use, as the ANYCUBIC listing states, and print on a 405 nm LCD, DLP or SLA printer. Clean prints with isopropyl alcohol or ethanol, as the SUNLU listing states.
What does ABS-like resin do differently?
The SUNLU ABS-like resin is less brittle and tougher than standard resin, with better abrasion resistance, which suits miniatures and tiny objects that need to survive handling.
Related: the best uv resin for crafts, the best 3d resin printers, the tough resin vs standard resin, and the 3d printers hub.




