Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best FEP Film (2026): 5 Picks for Resin Printers

5 FEP release films at 0.15 mm thick, compared by sheet size, transmittance and the resin printers each listing states they fit.

Best FEP Film (2026): 5 Picks for Resin Printers
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1HIKUDIY 380mm FEP FilmBest OverallHIKUDIY 380mm FEP Film9.7/10View on Amazon
  2. 2UniTak3D Saturn FilmBest for Saturn PrintersUniTak3D Saturn Film9.7/10View on Amazon
  3. 3CHINDRAG Mono FEP FilmBest Integrated FitCHINDRAG Mono FEP Film9.6/10View on Amazon
  4. 4ELEGOO Mars FEP FilmBest for Mars PrintersELEGOO Mars FEP Film9.6/10View on Amazon
  5. 5KOYOFEI Mars FEP FilmBest for Small Mars PrintersKOYOFEI Mars FEP Film9.6/10View on Amazon

A resin printer turns liquid resin into detailed miniatures, jewelry masters and small functional parts, and the thin film at the bottom of the vat decides whether each layer releases cleanly or sticks and tears. The best fep film is a clear, non-stick release film with high light transmittance that lets UV light through to each layer while the print peels away without damage. This guide compares the films on the numbers that decide fit and print quality: sheet size, thickness, transmittance and the printers each listing states it fits.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall HIKUDIY 380mm FEP Film: 6 large 380 x 260 mm sheets at 0.15 mm, over 95% transmittance, for printers up to 380 x 260 mm. Check price on Amazon
  • Best for Saturn Printers UniTak3D Saturn Film: 273 x 176 mm sheets at 0.15 mm with 95%+ transmittance for Elegoo Saturn 2, 3, 4 and 4 Ultra printers. Check price on Amazon
  • Best Integrated Fit CHINDRAG Mono FEP Film: A ringed, one-piece film for Anycubic Photon Mono 2 and Mono 4 that swaps without cutting or disassembly. Check price on Amazon
  • Best for Mars Printers ELEGOO Mars FEP Film: 206 x 146 mm sheets at 0.15 mm with 95% UV transmittance for ELEGOO Mars 4, Mars 5 and Mars 5 Ultra. Check price on Amazon
  • Best for Small Mars Printers KOYOFEI Mars FEP Film: 200 x 140 mm sheets at 0.15 mm with 95% light transmission for Mars 2, Mars 3 and Photon Mono printers. Check price on Amazon

Machines on the list

HIKUDIY 6PCS FEP Film Release Films for Anycubic

HIKUDIY 6PCS FEP Film Release Films for Anycubic

HIKUDIY9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-pack of 380 x 260 mm FEP release films at 0.15 mm thick, with over 95% transmittance, for large resin printers up to 380 x 260 mm.

Pros

  • 380 x 260 mm sheets, the largest here
  • Over 95% transmittance, 0.15 mm thick
  • Working range of -240 °C to 205 °C, melting point 260 °C
  • Ductility of up to 300%, per the listing

Cons

  • No warranty term is stated
  • No stated cycle or service life
  • No instructions or manual mentioned
  • No weight is stated
Saturn 4 Ultra FEP Release Liner Film

Saturn 4 Ultra FEP Release Liner Film

UniTak3D9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-pack of 273 x 176 mm FEP release films at 0.15 mm thick, with 95%+ light transmittance, for Elegoo Saturn 2, 3, 4 and 4 Ultra printers.

Pros

  • 273 x 176 mm sheets for Saturn printers
  • 95%+ light transmittance, 0.15 mm thick
  • Working range of -240 °C to 205 °C
  • Resists strong acids, caustic alkalis and oxidizers

Cons

  • No warranty term is stated
  • No stated cycle or service life
  • Fits Saturn printers only, per the listing
5PCS FEP Release Films Replacement for Anycubic

5PCS FEP Release Films Replacement for Anycubic

CHINDRAG9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-pack of integrated FEP release films with a ring, 197 x 131 x 0.15 mm, for Anycubic Photon Mono 2 and Mono 4 printers.

Pros

  • Ringed, one-piece design swaps without cutting
  • No need to disassemble the ring
  • Transmittance of more than 95%
  • Works stably at 204 °C, per the listing

Cons

  • No warranty term is stated
  • Fits Mono 2 and Mono 4 only, per the listing
  • No stated cycle or service life
  • No weight is stated
ELEGOO 5PCS FEP Release Film for Mars 4 & Mars 5

ELEGOO 5PCS FEP Release Film for Mars 4 & Mars 5

ELEGOO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-pack of FEP release films, 206 x 146 mm at 0.15 mm thick, with 95% UV light transmittance, for ELEGOO Mars 4, Mars 5 and Mars 5 Ultra printers.

Pros

  • 95% UV light transmittance for faster printing
  • Wear-resistant and chemically resistant
  • UV stable, does not degrade over time
  • Smooth surface, free of wrinkles, scratches, bubbles

Cons

  • No warranty term is stated
  • Fits Mars 4, 5 and 5 Ultra only, per the listing
  • No stated cycle or service life
KOYOFEI 6 PCS FEP Film 3D Printer Accessories

KOYOFEI 6 PCS FEP Film 3D Printer Accessories

KOYOFEI9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-pack of FEP films, 200 x 140 x 0.15 mm, with 95% light transmission, for ELEGOO Mars, Photon Mono, Halot One and LD-002 printers.

Pros

  • Fits the most printer models here
  • 95% light transmission, 0.15 mm thick
  • Non-stick, low-friction surface
  • Instructions printed on the packaging

Cons

  • No warranty term is stated
  • No stated cycle or service life

Other machines to compare

Specs compared

Model HQ Score Pack Film size Thickness Transmittance Fits
HIKUDIY 380mm FEP Film 9.7/10 6 380 x 260 mm 0.15 mm Over 95% Printers up to 380 x 260 mm
UniTak3D Saturn Film 9.7/10 5 273 x 176 mm 0.15 mm 95%+ Elegoo Saturn 2, 3, 4, 4 Ultra
CHINDRAG Mono FEP Film 9.6/10 5 197 x 131 mm 0.15 mm Over 95% Anycubic Photon Mono 2, Mono 4
ELEGOO Mars FEP Film 9.6/10 5 206 x 146 mm 0.15 mm 95% ELEGOO Mars 4, 5, 5 Ultra
KOYOFEI Mars FEP Film 9.6/10 6 200 x 140 mm 0.15 mm 95% Mars 2, 3, Photon Mono, Halot One, LD-002

We give each product’s specs as its manufacturer rates them; listings read 10 November 2026. Film size is the sheet size; every pick here lists a thickness of 0.15 mm.

What the listings tell you, and what they leave out

We read 5 FEP film listings for this guide. None stated a warranty term, and none printed a safety certification, so safety and warranty score zero across the group. 2 listings disagreed with themselves on pack count: the KOYOFEI title says 6 pieces while its spec table says 5 items, and the ELEGOO title says 5 pieces while its spec table says 1 item. In both cases this guide follows the title and bullets.

Every pick here lists the same thickness, 0.15 mm, and a transmittance of 95% or more, so size and fit decide the ranking more than thickness does. No listing states a service life in prints or hours, so longevity stays a claim rather than a number.

Buying guide: choosing the best fep film

Size first

Match the sheet to the printer: the KOYOFEI listing fits Mars 2, Mars 3 and Photon Mono printers at 200 x 140 mm, while the HIKUDIY listing fits printers up to 380 x 260 mm. Check the listing’s compatibility list before ordering, since the wrong size will not cover the vat.

Thickness

Every pick here lists 0.15 mm, so thickness does not separate them. The listings describe the film as a release layer: non-stick, low friction and smooth, so layers peel away without damage.

Transmittance

Transmittance is the share of UV light that passes through the film to reach the resin. Every pick here lists 95% or more: 95% on the KOYOFEI and ELEGOO listings, more than 95% on the CHINDRAG and HIKUDIY listings, and 95%+ on the UniTak3D listing. The ELEGOO listing states that 95% UV transmittance ensures faster and more accurate printing.

Integrated vs loose film

The CHINDRAG film is an integrated design with a ring: it swaps without cutting and without disassembling the ring. The other picks here are loose sheets. If the printer takes a ringed film, the integrated pick saves a step; if it takes a loose sheet, match the size to the vat.

Heat and chemicals

Resin printing runs warm, and the listings state working ranges: the CHINDRAG film works stably at 204 °C, while the UniTak3D and HIKUDIY listings state a range of -240 °C to 205 °C. The UniTak3D listing also states resistance to strong acids, caustic alkalis and potent oxidizing agents.

When to replace it

No listing here states a service life in prints or hours. The ELEGOO and UniTak3D listings describe a smooth surface free of wrinkles, scratches and bubbles, and link that surface to print quality. The KOYOFEI listing prints instructions on the packaging that explain how to change the film.

Safety

Liquid resin can irritate skin, so wear gloves when handling the vat and the film, and work with ventilation.

Project Match

Match the film to the printer first: the sheet size and the compatibility list decide the pick.

Printer Pick Why it fits
Mars 2, Mars 3 and Photon Mono KOYOFEI Mars FEP Film 200 x 140 mm, fits Mars 2, Mars 3 and Photon Mono
Mars 4, Mars 5 and Mars 5 Ultra ELEGOO Mars FEP Film 206 x 146 mm, fits Mars 4, Mars 5 and Mars 5 Ultra
Photon Mono 2 and Mono 4 CHINDRAG Mono FEP Film 197 x 131 mm, ringed design, no cutting
Saturn 2, 3, 4 and 4 Ultra UniTak3D Saturn Film 273 x 176 mm, fits Saturn 2, 3, 4 and 4 Ultra
Printers up to 380 x 260 mm HIKUDIY 380mm FEP Film 380 x 260 mm, fits printers up to 380 x 260 mm

How the scores add up

Each film is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
HIKUDIY 380mm FEP Film 9.7 32 22 21 n/a 0
UniTak3D Saturn Film 9.7 30 22 21 n/a 0
CHINDRAG Mono FEP Film 9.6 32 21 20 n/a 0
ELEGOO Mars FEP Film 9.6 30 21 20 n/a 0
KOYOFEI Mars FEP Film 9.6 29 20 21 n/a 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.

FAQ: lasers and CNC

What is FEP film?

FEP film is the clear release film at the bottom of a resin printer’s vat. It lets UV light through to each layer of resin, and its non-stick surface lets each layer peel away from the film without damage. Every pick here lists a light transmittance of 95% or more.

How do you clean FEP film?

No listing here states a cleaning method. The KOYOFEI listing prints instructions on the packaging that explain how to change the film, and the CHINDRAG listing says to read the manual on the package before installing. Follow the instructions that come with the film rather than improvising a cleaning routine.

How long does FEP film last?

No listing here states a service life in prints or hours. The listings describe the film as durable and for long-term use, and the ELEGOO listing states its film is UV stable so it does not degrade over time. The UniTak3D listing states its film maintains performance across a temperature range of -240 °C to 205 °C.

What does FEP film do in a resin printer?

FEP film is the release film in a resin printer’s vat: its non-stick surface prevents the resin from sticking to the film, and its transmittance of 95% or more lets UV light through for stable UV lighting. After printing, the film’s release performance makes it easy to remove the models without damage.

Related: the resin 3D printer hub, 3D printing resins, 3D printer maintenance and 3D printer types.

More buying guides

Resin 3D Printers ·

Types of Resin Printers Compared

A plain guide to the main types of resin printers, how each type hardens liquid resin into a part, and which type fits miniatures,…