Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Magnetic Flexible Spring Steel Build Plate for Resin 3d Printer (2026)

Four magnetic flexible spring steel build plates for resin 3D printers, compared by size, magnet strength, surface and fit.

Best Magnetic Flexible Spring Steel Build Plate for Resin 3d Printer (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Sovol Flex PlateBest OverallSovol Flex Plate9.7/10View on Amazon
  2. 2YTKavq Flex PlateBest MagnetYTKavq Flex Plate9.7/10View on Amazon
  3. 3HIKUDIY Flex PlateBest for Mono 2HIKUDIY Flex Plate9.6/10View on Amazon
  4. 4MORKEYA Flex PlateBest for Mono 4KMORKEYA Flex Plate9.6/10View on Amazon

A resin print that will not come off the plate is the slowest part of the job. A flexible steel plate bends, the print pops off in one piece, and the next print starts sooner. The best magnetic flexible spring steel build plate for resin 3d printer use fits the printer, holds firm while printing and flexes for release, and the plates below compare size, magnet, surface and fit from each listing.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Sovol Flex Plate: Largest plate here at 163 by 89 mm, with lift tabs and a spare plate for continuous printing. Check price on Amazon
  • Best Magnet YTKavq Flex Plate: 1800Gs neodymium base, 0.6 mm steel rated for over 10,000 flex cycles and a PEI coating. Check price on Amazon
  • Best for Mono 2 HIKUDIY Flex Plate: 160 by 94 mm plate with a handle and a CNC drawn surface for the Photon Mono 2. Check price on Amazon
  • Best for Mono 4K MORKEYA Flex Plate: 135 by 80 mm plate with a brushed texture and an anti-stick surface for the Photon Mono and Mono 4K. Check price on Amazon

Machines on the list

Sovol 2 Pack Resin 3D Printer Flex Spring Steel

Sovol 2 Pack Resin 3D Printer Flex Spring Steel

Sovol9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of 163 by 89 mm spring steel flex plates with a magnetic base and lift tabs, for the Anycubic Photon Mono 4 and 4 Ultra.

Pros

  • Largest plate here, 163 by 89 mm
  • 2 plates, so printing continues while one is cleaned
  • Brushed surface for better adhesion
  • Lift tabs for easy removal

Cons

  • No warranty term is stated
  • No thickness is stated
  • No magnet strength is stated
  • Wait 72 hours after install before printing
YTKavq Resin 3D Printer Flex Building

YTKavq Resin 3D Printer Flex Building

YTKavq9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of 135 by 80 mm spring steel flex plates with an 1800Gs magnetic base and a PEI coating, for Anycubic Photon printers.

Pros

  • 1800Gs neodymium magnetic base
  • 0.6 mm steel rated for over 10,000 flex cycles
  • PEI coating resists IPA and resin
  • Up to 60% faster post-processing, per the listing

Cons

  • No warranty, per the spec table
  • Compatibility claim of up to 310 by 174 mm does not fit the 135 by 80 mm plate
  • 3 to 4 mm thickness shrinks printable height
  • No weight is stated
HIKUDIY 2PCS Resin 3D Printer Flex Build Plate

HIKUDIY 2PCS Resin 3D Printer Flex Build Plate

HIKUDIY9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of 160 by 94 mm spring steel flex plates with a magnetic base and a handle, for the Anycubic Photon Mono 2.

Pros

  • 160 by 94 mm for the Photon Mono 2
  • CNC drawn surface holds the model
  • Handle for install and removal
  • 2 plates in the pack

Cons

  • No warranty term is stated
  • 3 to 4 mm thickness shrinks printable height
  • No magnet strength is stated
135x80mm Magnetic Build Plate for Anycubic Photon

135x80mm Magnetic Build Plate for Anycubic Photon

MORKEYA9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of 135 by 80 mm flexible spring steel build plates with a magnetic base and a brushed texture, for the Anycubic Photon Mono and Mono 4K.

Pros

  • 135 by 80 mm for the Photon Mono and Mono 4K
  • Brushed texture for first-layer bonding
  • Anti-stick surface cleans with water
  • 2 plates in the pack

Cons

  • No warranty term is stated
  • No thickness is stated
  • No magnet strength is stated

Other machines to compare

Specs compared

Model HQ Score Size Thickness Magnet Surface Pack
Sovol Flex Plate 9.7/10 163 x 89 mm Not stated Magnetic base Brushed 2 pack
YTKavq Flex Plate 9.7/10 135 x 80 mm 3-4 mm 1800Gs neodymium PEI coating 2 pack
HIKUDIY Flex Plate 9.6/10 160 x 94 mm 3-4 mm Magnetic base CNC drawn 2 pack
MORKEYA Flex Plate 9.6/10 135 x 80 mm Not stated Magnetic base Brushed texture 2 pack

Specs are what each manufacturer publishes as its rating on the listing, collected 11 November 2026. Plate size is the steel plate size in millimetres.

What the listings tell you, and what they leave out

We read 4 resin build plate listings for this guide. None states a warranty term, and none names a safety standard, so all four score zero for safety and warranty. Two listings state the plate thickness, two do not. One listing states a magnet strength of 1800Gs and a flex-cycle figure of over 10,000 cycles; the others state neither.

Buying guide: choosing the best magnetic flexible spring steel build plate for resin 3d printer

Match the size to the printer

The plates here measure 163 by 89 mm, 160 by 94 mm and 135 by 80 mm. The Sovol plate fits the Photon Mono 4 and 4 Ultra, the HIKUDIY plate fits the Photon Mono 2, and the YTKavq and MORKEYA plates fit the Photon, Photon S, Photon Mono and Photon Mono 4K. Check the printer model before ordering.

Magnet strength and hold

The YTKavq listing states an 1800Gs neodymium magnetic base. The Sovol, HIKUDIY and MORKEYA listings state a magnetic base without a strength figure. A weak hold lets the plate shift during printing, so the magnet matters as much as the steel.

Surface and adhesion

The Sovol and MORKEYA plates have a brushed surface, the HIKUDIY plate has a CNC drawn surface, and the YTKavq plate has a PEI coating. Brushed and PEI surfaces hold the first layer, and the plate flexes to release the print.

Thickness and re-leveling

The HIKUDIY and YTKavq plates are 3 to 4 mm thick, and the listings say the printable height shrinks by 3 to 4 mm after install, so re-level the printer. The Sovol listing says to adjust the z limit switch a little higher after install. The MORKEYA listing states no thickness.

Install and wait

Clean the build plate with alcohol so no resin or dust is left, stick the magnetic base on and press it flat, then wait 72 hours before printing, per the Sovol listing.

Project Match

  • Small prints and miniatures: the YTKavq plate, with flex release that protects delicate prints from warping or cracks, per the listing.
  • Photon Mono 4 and 4 Ultra: the Sovol plate at 163 by 89 mm, with a spare plate for continuous printing.
  • Photon Mono 2: the HIKUDIY plate at 160 by 94 mm, with a handle for easy removal.
  • Photon Mono and Mono 4K: the YTKavq or MORKEYA plate at 135 by 80 mm.

How the scores add up

Each plate is scored out of 10 on performance, build, value, safety and warranty, using only what the listing publishes. The weights are explained on the How We Pick page.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Sovol Flex Plate 9.7 32 22 21 n/a 0
YTKavq Flex Plate 9.7 30 22 21 n/a 0
HIKUDIY Flex Plate 9.6 30 21 21 n/a 0
MORKEYA Flex Plate 9.6 29 21 20 n/a 0

HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.

FAQ: lasers and CNC

How do I install a flexible build plate?

Clean the build plate with alcohol so no resin or dust is left, then stick the magnetic base on the build plate and press it flat. Wait 72 hours before printing, per the Sovol listing. Re-level the printer, since the plate adds 3 to 4 mm of thickness.

What size build plate fits my printer?

Match the plate to the printer model, not just the size. The Sovol plate fits the Photon Mono 4 and 4 Ultra at 163 by 89 mm, the HIKUDIY plate fits the Photon Mono 2 at 160 by 94 mm, and the YTKavq and MORKEYA plates fit the Photon, Photon S, Photon Mono and Photon Mono 4K at 135 by 80 mm.

How do I remove a print from a flexible build plate?

Bend the plate and the print releases in one piece. The YTKavq listing says flex release protects delicate prints from warping or cracks, and the MORKEYA listing says the plate bends smoothly for effortless print release. The Sovol pack includes a spare plate, so printing can continue while the first plate is cleaned.

Do I need to re-level after installing a build plate?

Yes. The HIKUDIY and YTKavq listings say the printable height shrinks by 3 to 4 mm after install, so re-level the printer for excellent printing results. The Sovol listing says to adjust the z limit switch a little higher after install.

How do I clean a flexible build plate?

Clean the plate with alcohol to make sure no resin or dust is left on the surface, per the Sovol and HIKUDIY listings, and make sure the plate is clean and dry before printing. The MORKEYA listing says its anti-stick surface cleans quickly with water or a soft cloth.

Related: the resin 3D printer hub, best 3D printing resins, best 3D print removal tool and best 3D resin printers. Also see our 3D printers.

More buying guides

Resin 3D Printers ·

Types of Resin Printers Compared

A plain guide to the main types of resin printers, how each type hardens liquid resin into a part, and which type fits miniatures,…

Resin 3D Printers ·

Best Respirator Filter for Resin (2026)

5 respirator filters for resin compared by type, coverage, pack and fit, from NIOSH approved P100 pairs to 80-piece 5N11 packs.