Best Fep Film for Saturn 4 Ultra (2026): 5 Films Compared
5 release films for the Saturn 4 Ultra compared by size, thickness, light transmittance, pack count and stated fit for resin printing.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best Exact FitELEGOO PFA 2.09.7/10View on Amazon - 2
Best 6-PackHenaiser FEP9.7/10View on Amazon - 3
Best Large SheetHIKUDIY FEP9.6/10View on Amazon - 4
Best ACF PickVOLFAN ACF9.6/10View on Amazon - 5
Best A4 SizeKOYOFEI FEP9.5/10View on Amazon
A Saturn 4 Ultra print that will not release from the vat film turns a long print into a cleanup job, and a scratched or cloudy film shows up in the layers that follow. The best fep film for Saturn 4 Ultra is the one cut to the vat size, with the thickness and light transmittance the listing states, so the layers release and harden as the printer expects. This roundup compares 5 release films by size, thickness, light transmittance, pack count and stated Saturn 4 Ultra fit, using only what each listing publishes.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Exact Fit ELEGOO PFA 2.0: 273x176mm PFA 2.0, 0.127mm, 95% UV transmittance, Saturn 4 Ultra named Check price on Amazon
- Best 6-Pack Henaiser FEP: 6 FEP sheets at 273x176mm, 0.15mm, 95% light transmission Check price on Amazon
- Best Large Sheet HIKUDIY FEP: 320x220mm sheet, 0.15mm, over 95% transmittance, 6 pieces Check price on Amazon
- Best ACF Pick VOLFAN ACF: ACF composite, 0.3mm, pre-cut 268x175mm, 2 sheets, Saturn 4 Ultra named Check price on Amazon
- Best A4 Size KOYOFEI FEP: 6 A4 sheets at 290x210mm, 0.15mm, 95% light transmission Check price on Amazon
Machines on the list

ELEGOO 3 PCS PFA Release Liner Film 2.0 For ELEGOO
A 273x176mm PFA 2.0 release film for the Saturn 4 Ultra, 0.127mm thick with 95% UV light transmittance, in a pack of 3.
Pros
- 273x176mm size matches the Saturn 4 Ultra film area
- PFA 2.0 is stated to perform better than FEP 1.0
- 95% UV light transmittance and UV stability for prolonged exposure, per the listing
- Composite build keeps the film from adhering to the LCD screen
Cons
- 3 pieces in the pack, fewer than the 6-piece packs here
- No warranty term is stated
- No heat range is stated for this film

Henaiser 6PCS FEP Release Film Compatible
A 273x176mm FEP film for the Saturn 4 Ultra, 0.15mm thick with 95% light transmission, in a pack of 6.
Pros
- 273x176mm size matches the Saturn 4 Ultra film area
- 6 sheets in the pack
- 95% light transmission for stable UV exposure
- Heat resistance from -240 °C to 205 °C is stated
Cons
- No warranty term is stated
- No melting point is stated
- Protective films on both sides must be removed before installation
- 0.15mm thickness is thicker than the ELEGOO PFA 2.0 at 0.127mm

HIKUDIY 6PCS FEP Film Release Films for Anycubic
A 320x220mm FEP film, 0.15mm thick with over 95% transmittance, in a pack of 6, for resin printers under 320x220mm.
Pros
- 320x220mm sheet fits printers under 320x220mm, per the listing
- Transmittance over 95%
- Melting point of 260 °C is stated
- Ductility of up to 300% is stated
Cons
- No warranty term is stated
- 320x220mm sheet is larger than the Saturn 4 Ultra film area of 273x176mm
- No pre-cut size for the Saturn 4 Ultra is stated

ACF Film 290x195mm 0.3mm
An ACF composite release film, 0.3mm thick, as a 290x195mm sheet with a 268x175mm pre-cut, in a pack of 2.
Pros
- ACF composite is built for fast, repeated layer separation
- Pre-cut 268x175mm size is stated
- 0.3mm thickness suits demanding print workloads, per the listing
- Saturn 4 Ultra is named among the compatible models
Cons
- No warranty term is stated
- No light transmittance figure is stated
- 2 pieces in the pack, fewer than the 6-piece packs here

KOYOFEI 6 PCS A4 Size FEP Film
An A4 FEP film, 290x210mm and 0.15mm thick with 95% light transmission, in a pack of 6.
Pros
- 6 sheets in the pack
- 95% light transmission for stable UV exposure
- Heat resistance from -240 °C to 205 °C is stated
- Package tutorial for replacing the film is included
Cons
- No warranty term is stated
- Saturn 4 Ultra is not named in the compatibility list
- 290x210mm sheet is larger than the Saturn 4 Ultra film area of 273x176mm
- No melting point is stated
Other machines to compare
ELEGOO 3PCS PFA Film for Saturn 3/4/4 Ultra/4 Ultra 16K ResinCheck price on Amazon
ELEGOO 5 PCS PFA Release Liner Film 2.0 273 x 176 mmCheck price on Amazon
Saturn 4 Ultra PFA Release Liner Film 273x176mm CompatibleCheck price on Amazon
ELEGOO PFA Release Liner Film 3PCS for Saturn 4 UltraCheck price on Amazon
KOYOFEI 6 PCS FEP Film for Resin 3D PrinterCheck price on Amazon
Specs compared
| Film | HQ Score | Size | Thickness | Transmittance | Pack | Saturn 4 Ultra |
|---|---|---|---|---|---|---|
| ELEGOO PFA 2.0 | 9.7/10 | 273x176mm | 0.127mm | 95% UV | 3 pieces | Named |
| Henaiser FEP | 9.7/10 | 273x176mm | 0.15mm | 95% | 6 pieces | Named |
| HIKUDIY FEP | 9.6/10 | 320x220mm | 0.15mm | Over 95% | 6 pieces | Named |
| VOLFAN ACF | 9.6/10 | 290x195mm sheet | 0.3mm | Not stated | 2 pieces | Named |
| KOYOFEI FEP | 9.5/10 | 290x210mm | 0.15mm | 95% | 6 pieces | Not named |
Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026. 4 of the 5 name the Saturn 4 Ultra; the KOYOFEI does not.
Fit comes first for the Saturn 4 Ultra
4 of the 5 films name the Saturn 4 Ultra in the listing. The ELEGOO PFA 2.0 and the Henaiser FEP are cut to 273x176mm, the size the Saturn 4 Ultra films use. The HIKUDIY sheet is 320x220mm and the KOYOFEI sheet is 290x210mm, both larger than the 273x176mm film area, while the VOLFAN ACF sheet is 290x195mm with a 268x175mm pre-cut. A sheet larger than the vat needs trimming or a different vat, and neither listing states trimming, so start with the size that matches.
How to choose the best fep film for Saturn 4 Ultra
Match the sheet to the vat
Measure the vat and compare it with the sheet size before ordering, as the VOLFAN listing advises. The ELEGOO PFA 2.0 and the Henaiser FEP are 273x176mm, the HIKUDIY sheet is 320x220mm for printers under 320x220mm, the KOYOFEI sheet is 290x210mm, and the VOLFAN sheet is 290x195mm with a 268x175mm pre-cut. The KOYOFEI compatibility list names Saturn 2, Saturn 8K, Saturn 3 and Saturn 3 Ultra, but not the Saturn 4 Ultra, so check the model list on every listing, not just the size.
Thickness and release
Thickness here runs from 0.127mm on the ELEGOO PFA 2.0 to 0.3mm on the VOLFAN ACF, with the KOYOFEI, HIKUDIY and Henaiser FEP films at 0.15mm. The ELEGOO PFA 2.0 states less release tension than FEP 1.0, and the VOLFAN ACF states low release force for fast, repeated layer separation. The Henaiser and HIKUDIY films state a stable release force. Pick the release behavior the listing states for the print speed you run, and keep the release surface clean so the film keeps its stated behavior.
Light transmittance and heat range
Light transmittance is 95% on the KOYOFEI, ELEGOO and Henaiser films, and over 95% on the HIKUDIY film. The VOLFAN listing states no transmittance figure, only that the clear film supports UV transmission through the vat. Heat resistance from -240 °C to 205 °C is stated on the KOYOFEI, HIKUDIY and Henaiser films, and the HIKUDIY film also states a melting point of 260 °C. The ELEGOO film states 95% UV light transmittance and UV stability for prolonged exposure to the UV light source.
Pack count and spares
The KOYOFEI, HIKUDIY and Henaiser packs hold 6 sheets, the ELEGOO pack holds 3, and the VOLFAN pack holds 2. A 6-sheet pack covers more replacements than a 2-sheet pack, so count the sheets against how often the film is changed. The VOLFAN listing advises keeping 2 ACF replacement films ready for maintenance or damage, and the same logic applies to the other packs: keep a spare sheet with the rest of the resin 3d printer accessories kit so a torn film does not stop a print run.
Replace the film using the tension and replacement procedure recommended by the printer maker, keep the release surface clean, and handle the sheet carefully so the film stays free of wrinkles, scratches and bubbles. Follow the printer maker’s guidance for resin handling and vat cleaning, and keep the work area vented as the maker advises.
Project Match
- Saturn 4 Ultra prints at 273x176mm: the ELEGOO PFA 2.0 and the Henaiser FEP, both cut to that size.
- Larger resin printers: the HIKUDIY 320x220mm sheet fits printers under 320x220mm, per the listing.
- High-speed lift profiles: the VOLFAN ACF, built for fast, repeated layer separation.
- Saturn 3 Ultra and older Saturn models: the KOYOFEI 290x210mm sheet names Saturn 2, Saturn 8K, Saturn 3 and Saturn 3 Ultra.
How the scores add up
The HQ Score weighs performance (fit for the Saturn 4 Ultra, size, thickness and transmittance), build (material and stated heat range), value for the stated specs, safety and warranty. No film here states a safety certification or a warranty term. How We Pick explains the weights.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ELEGOO PFA 2.0 | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Henaiser FEP | 9.7 | 30 | 21 | 22 | n/a | 0 |
| HIKUDIY FEP | 9.6 | 29 | 20 | 21 | n/a | 0 |
| VOLFAN ACF | 9.6 | 28 | 21 | 19 | n/a | 0 |
| KOYOFEI FEP | 9.5 | 26 | 20 | 20 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What size FEP film does the Saturn 4 Ultra use?
The ELEGOO PFA 2.0 and the Henaiser FEP are both 273x176mm and name the Saturn 4 Ultra. The HIKUDIY sheet is 320x220mm and the KOYOFEI sheet is 290x210mm, so check the size against the vat before ordering.
What is the difference between FEP and PFA film?
The ELEGOO listing states PFA 2.0 performs better than FEP 1.0, with less release tension and a composite build that keeps the film from adhering to the LCD screen. FEP is the standard release film in this group, while PFA 2.0 is ELEGOO’s newer composite version.
How thick is the film on these picks?
The ELEGOO PFA 2.0 is 0.127mm, the KOYOFEI, HIKUDIY and Henaiser FEP films are 0.15mm, and the VOLFAN ACF is 0.3mm.
Does the VOLFAN ACF fit the Saturn 4 Ultra?
Yes. The listing names the Saturn 4 Ultra among the compatible models. The sheet is 290x195mm with a 268x175mm pre-cut, and the listing says to compare the printer model and vat dimensions with the size above.
How many sheets come in each pack?
The KOYOFEI, HIKUDIY and Henaiser packs hold 6 sheets, the ELEGOO pack holds 3, and the VOLFAN pack holds 2.
Related: best resin 3d printer accessories kit, best isopropyl alcohol for 3d printing, best 3d printing cleaning kit, best smooth build plate for 3d printer, best tools to clean up 3d prints and the resin 3d printers hub.




