Best Countersink Drill Bit with Depth Stop Under $30 (2026)
Five countersink drill bit sets with adjustable depth stops, from 4 to 9 pieces, compared by sizes, stop collars, materials and kit contents, all under $30.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallXCMVCN 9-Piece Set9.7/10View on Amazon - 2
Best Bearing CollarMozeyerh 9-Piece Set9.6/10View on Amazon - 3
Best 5-Piece ValueBURMONG 5-Piece Set9.6/10View on Amazon - 4
Best 4-Size SetBigwish 4-Size Set9.5/10View on Amazon
Flush screws make a cabinet door sit flat, a deck board lie smooth and a shelf bracket disappear into the work, and the difference between a clean install and a proud screw head is the countersink. The best countersink drill bit with depth stop under $30 pairs a pilot bit with a cutter and a stop collar, so every hole lands at the same depth. This guide compares the sets by sizes, stop collars, cutters and kit contents, using only what each listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall XCMVCN 9-Piece Set: 5 aluminum depth stops, drilling depth to 1.3 inches and countersink depth 0 to 0.5 inches, in a compartment case. Check price on Amazon
- Best Bearing Collar Mozeyerh 9-Piece Set: Aluminum stop collar with built-in bearings, M2 HSS bits, 8.82 ounces in a small case. Check price on Amazon
- Best 5-Piece Value BURMONG 5-Piece Set: 5 sizes with 2 depth stop collars and a labeled case at about 250g. Check price on Amazon
- Best 4-Size Set Bigwish 4-Size Set: 4 sizes with an auto-stop collar and four-flute HCS cutters. Check price on Amazon
Machines on the list

XCMVCN 9 PCS Countersink Drill Bit Set
A 9-piece countersink drill bit set with 5 aluminum adjustable depth stops, TCT tungsten carbide tipped cutters and 2-flute HSS M2 pilot bits, for 82-degree countersinks in wood, MDF and aluminum.
Pros
- 5 aluminum adjustable depth stops, one per bit
- Drilling depth to 1.3 inches, countersink depth 0 to 0.5 inches
- TCT carbide cutters with 2-flute HSS M2 pilot bits
- Sturdy case with independent compartments
Cons
- No warranty term stated
- No weight stated
- No safety listing stated

9PCS Countersink Drill Bit Set with Adjustable
A 9-piece countersink drill bit set with 5 two-flute TCT tapered bits, an aluminum stop collar with built-in bearings, an L wrench and an S2 PH2 screwdriver bit, in a small carrying case.
Pros
- Aluminum stop collar with built-in bearings
- M2 HSS pilot bits with spiral chip flutes
- Weighs 8.82 ounces in a small carrying case
- 82-degree counterbores in 3/8 and 1/2 inch
Cons
- No warranty term stated
- No depth range stated in inches
- No safety listing stated
- Case size not stated

9PCS Countersink Drill Bit Set with Adjustable
A 9-piece countersink drill bit set with 5 TCT bits in 1/8 to 3/16 inch sizes, an adjustable aluminum stop collar, a wrench and a screwdriver bit, for wood, plywood, MDF and plastic.
Pros
- 5 sizes from 1/8 to 3/16 inch with 3/8 and 1/2 inch counterbores
- Adjustable aluminum stop collar for consistent depth
- TCT cutting edges for hardwood, softwood, plywood and MDF
- Low speed of 201 RPM stated for cleaner edges
Cons
- No warranty term stated
- No safety listing stated

BURMONG 5-Piece Countersink Drill Bit Set
A 5-piece countersink drill bit set with 1/8 to 3/16 inch bits, 2 depth stop collars with plastic rings, a 1/4 inch hex shank and a lightweight storage case.
Pros
- 5 sizes from 1/8 to 3/16 inch for 3/8 and 1/2 inch 82-degree holes
- 2 depth stop collars with plastic rings
- Bits clearly labeled in a lightweight storage case
- Case weighs about 250g
Cons
- No warranty term stated
- Steel construction, no TCT or HSS grade stated
- No safety listing stated
- No speed stated

Countersink Drill Bit Set with Depth Stop Collar
A 4-size countersink drill bit set with four-flute HCS cutters and HSS drill bits, an auto-stop collar and a hex wrench, for wood, plywood, MDF, particle board, plastic and drywall.
Pros
- 4 sizes from 7/64 to 5/32 inch with 3/8 inch counterbores
- Auto-stop collar stops on contact with the wood
- Four-flute HCS cutters with HSS drill bits
- 82-degree angle with a 1/4 inch hex shank
Cons
- Only 4 sizes, no 11/64 or 3/16 inch bit
- No case stated
- No warranty term stated
- No safety listing stated
Other machines to compare
Lizekm Countersink Drill Bit Set with Low Friction Depth StopCheck price on Amazon
Countersink Drill Bit Set with Adjustable DepthCheck price on Amazon
OAOJUBR 5PCS Countersink Drill Bit SetCheck price on Amazon
3/8" x 1/8" Carbide Tipped Countersink Drill Bit with DepthCheck price on Amazon
Countersink Drill Bit Set for WoodworkingCheck price on Amazon
Specs compared
| Model | HQ Score | Pieces | Sizes | Stop collar | Angle | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| XCMVCN 9-Piece Set | 9.7/10 | 9 / 5 | 5 sizes | 5 aluminum stops | 82° | Not stated | Not stated |
| Mozeyerh 9-Piece Set | 9.6/10 | 9 | 5 sizes | Aluminum, bearings | 82° | 8.82 ounces | Not stated |
| Bigwish 9-Piece Set | 9.6/10 | 9 / 5 | 5 sizes | Aluminum stop collar | Not stated | Not stated | Not stated |
| BURMONG 5-Piece Set | 9.6/10 | 5 | 5 sizes | 2 collars, plastic rings | 82° | Approx. 250g (case) | Not stated |
| Bigwish 4-Size Set | 9.5/10 | 4 | 4 sizes | Auto-stop collar | 82° | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026.
What the countersink listings tell you
We read 5 countersink listings for this guide. Only 2 state a weight, and none states a warranty term. Two listings give the piece count two ways, with the title and the spec table disagreeing, and one listing gives the flute count two ways. Read the sizes and the stop collar, not just the title.
Buying guide: the best countersink drill bit with depth stop under 30
Sizes and the 82-degree angle
Sizes run from 1/8 inch to 3/16 inch on the pilot bits, with 3/8 inch and 1/2 inch counterbores. Four of the five sets state an 82-degree countersink angle; the Bigwish 9-piece set does not state an angle. Match the pilot size to the screw and the counterbore to the screw head, and check the angle before you buy, since a mismatched angle leaves the head proud or sunk.
Depth stops and collars
The stop collar is what makes these sets. The Bigwish 9-piece set uses an adjustable aluminum stop collar, the Mozeyerh set uses an aluminum stop collar with built-in bearings, the Bigwish 4-size set uses an auto-stop collar, the BURMONG set includes 2 depth stop collars with plastic rings, and the XCMVCN set includes 5 aluminum adjustable depth stops. The XCMVCN listing states drilling depth to 1.3 inches and countersink depth from 0 to 0.5 inches. Set the collar on scrap first, then lock it and drill the work.
Cutters and materials
Cutter material splits the sets. The Bigwish 9-piece set and the XCMVCN set use TCT tungsten carbide tipped cutters, the Mozeyerh set uses M2 HSS pilot bits with TCT alloy cutters, the Bigwish 4-size set uses four-flute HCS cutters with HSS drill bits, and the BURMONG set uses steel with alloy steel cutting edges. All five list wood, plywood and MDF; most add plastic, particle board and drywall, and the XCMVCN set adds hardwood and aluminum. Match the cutter to the material before you drill.
Speed and chip clearing
Slow speed gives cleaner edges. The Bigwish 9-piece listing gives a low speed of 201 RPM, the Mozeyerh listing suggests approximately 200 RPM, and the XCMVCN listing suggests around 200 RPM for burr-free edges. Spiral flutes pull chips up and out, and the Bigwish 9-piece set and the Mozeyerh set both describe spiral flutes that clear chips as you drill. Let the bit cut and clear the chips before you push harder.
Cases and kit contents
Three of the five sets state a case: the Mozeyerh set in a small carrying case, the BURMONG set in a lightweight storage case, and the XCMVCN set in a sturdy case with independent compartments. The two Bigwish sets do not state a case. Count the wrench and the screwdriver bit in the kit: the Bigwish 9-piece set, the Mozeyerh set and the XCMVCN set each include a wrench and a screwdriver bit.
Wear eye protection, clamp the workpiece down, and keep hands clear of the bit. Run the bit at the slow speed the listing states, and let it stop before you lift it out of the hole.
Project Match
- Cabinetry and furniture: the XCMVCN set, with drilling depth to 1.3 inches and countersink depth from 0 to 0.5 inches for flush screws.
- Decks and shelving: the Bigwish 9-piece set, made for cabinetry, furniture, decks and shelving on wood, plywood and MDF.
- Drywall and trim: the Mozeyerh set, listed for drywall as well as wood, plywood and MDF.
- Mixed materials: the XCMVCN set, the only one that lists aluminum alongside wood materials.
- Everyday screws: the Bigwish 4-size set, with 4 sizes from 7/64 inch to 5/32 inch for common screws.
How the scores add up
Each set is scored on performance, build, value, safety and warranty. How we pick explains the weights. No listing states a safety listing or a warranty term, so every pick earns no safety or warranty points.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| XCMVCN 9-Piece Set | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Mozeyerh 9-Piece Set | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Bigwish 9-Piece Set | 9.6 | 29 | 20 | 20 | n/a | 0 |
| BURMONG 5-Piece Set | 9.6 | 28 | 20 | 20 | n/a | 0 |
| Bigwish 4-Size Set | 9.5 | 27 | 19 | 19 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What does a depth stop do on a countersink bit?
The stop collar sets how deep the bit drills, so every countersunk hole lands at the same depth and the screw head sits flush. The collar stops the bit when it meets the wood, which keeps you from drilling too deep.
What sizes do these sets cover?
Pilot sizes run from 1/8 inch to 3/16 inch, with 3/8 inch and 1/2 inch counterbores. The Bigwish 4-size set covers 7/64 inch to 5/32 inch. Match the pilot to the screw shank and the counterbore to the screw head.
Can these bits drill plastic and aluminum?
Four of the five sets list plastic among the materials, and the XCMVCN set is the only one that lists aluminum. Check the material list on the set you buy before you drill.
Do these sets include a case?
Three do: the Mozeyerh set, the BURMONG set and the XCMVCN set. The two Bigwish sets do not state a case.
What speed should I run a countersink bit?
The listings suggest slow speeds: the Bigwish 9-piece set gives 201 RPM, and the Mozeyerh and XCMVCN listings suggest around 200 RPM. Slow speed gives cleaner edges and smoother countersunk finishes.
Related: best countersink drill bit with depth stop, best countersink drill bit set for wood, best carbide countersink bit, countersink bit vs counterbore bit and the CNC tooling hub.




