Best Drill Bit Sharpener for Home Use (2026)
Plug-in and grinder-mount sharpeners for home workshops, compared by bit range, angle control, wheels and weight.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVEVOR MR-20G9.6/10View on Amazon - 2
Best Safety FeaturesMDPSDS RS-19.5/10View on Amazon - 3
Best Compact ElectricGeneric HZRE21DBUS9.4/10View on Amazon - 4
Best for Angle Grinderssmartang Grinder Jig9.3/10View on Amazon - 5
Best Multi-ToolVOUSXLLEZ MZQ0019.4/10View on Amazon
A dull drill bit wanders off the mark, tears the surface and turns a quick hole into a wrestling match. A sharp bit starts clean, cuts fast and leaves a tidy hole, which is why a home workshop with a drawer of tired bits needs a way to bring them back. This guide compares the options for the best drill bit sharpener for home use, from plug-in electric machines to a jig that rides on an angle grinder, so you can match the sharpener to the bits you already own.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall VEVOR MR-20G: 3 mm to 20 mm range with 18 collets, 95° to 135° point angle adjustment and CBN and SDC wheels. Check price on Amazon
- Best Safety Features MDPSDS RS-1: Non-slip base and one-touch switch, 19 sizes for 1/8 in to 15/32 in bits at a 130° angle. Check price on Amazon
- Best Compact Electric Generic HZRE21DBUS: 95 W plug-in machine at 1500 rpm for 3 mm to 12 mm bits, 2.6 lb and 4.7 x 4.7 x 6.3 in. Check price on Amazon
- Best for Angle Grinders smartang Grinder Jig: Jig for 4-1/2 in and 5 in angle grinders, 2 mm to 13 mm bits at 118°, with metal screws and copper rings. Check price on Amazon
- Best Multi-Tool VOUSXLLEZ MZQ001: 4 diamond discs and 3 grooves for 5/64 in to 5/8 in bits, plus kitchen knives and scissors. Check price on Amazon
Machines on the list

VEVOR Drill Bits Sharpener
A 3 mm to 20 mm electric sharpener with 18 collets, 95° to 135° point angle adjustment, CBN and SDC wheels and a 4500 rpm DC motor.
Pros
- 18 elastic collets cover 3 mm to 20 mm bits, plus 2 collet chucks
- 95° to 135° point angle adjustment with 4 lip relief angle settings
- CBN wheel for high-speed steel and SDC wheel for alloy tungsten steel
- 45# steel body and a 4500 rpm DC motor for steady grinding
Cons
- No warranty term is stated
- 20.1 lb, heavier than the 2.6 lb Generic
- Lip relief angle is set by positioner pins, which takes more setup than a fixed angle
- No stated safety certification or interlock

Drill Bit Sharpener, Electric Drill Bit Sharpener
A plug-in electric sharpener for 1/8 in to 15/32 in twist bits at 130°, with a non-slip base, one-touch switch and spare grinding wheels.
Pros
- 19 sizes for 1/8 in to 15/32 in twist drill bits at a 130° angle
- Handles high-speed steel, carbide, hardened steel and high carbon steel
- Non-slip base and one-touch switch let you complete the work alone, per the listing
- Grinding wheel accessories included for a worn wheel
Cons
- No warranty term is stated
- No motor power or speed is stated
- No dimensions or weight are stated
- The bullets mention sharpening a knife, which reads as copied text for a drill bit machine

Electric Drill Bit Sharpener for 3mm to 12mm Drill
A 95 W plug-in sharpener for 3 mm to 12 mm bits at 118°, running at 1500 rpm in a 4.7 x 4.7 x 6.3 in body that weighs 2.6 lb.
Pros
- 95 W motor at 1500 rpm on 120 V and 60 Hz
- Covers 3 mm to 12 mm bits, including sizes from 1/8 in to 15/32 in
- For HSS and carbon steel drill bits
- 2.6 lb, lighter than the 20.1 lb VEVOR
Cons
- No warranty term is stated
- No safety feature is stated
- Only HSS and carbon steel are listed, not carbide

Drill Bit Sharpener,Portable Drill Bit
A portable sharpener with 4 diamond discs and 3 grooves for 5/64 in to 5/8 in bits, powered by an electric drill, that also sharpens kitchen knives and scissors.
Pros
- 4 diamond grinding discs and 3 grinding grooves for 5/64 in to 5/8 in bits
- Covers 2 mm to 16 mm bits in high-speed steel, carbide, twist and cobalt
- Also sharpens kitchen knives and scissors
- Portable, compact size for use in different workplaces
Cons
- No warranty term is stated
- Needs an electric drill to run; it has no motor of its own
- No point angle is stated
- No dimensions or weight are stated

𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 Circular Drill Bit Sharpener for 4-1/2in
A jig that mounts on a 4-1/2 in or 5 in angle grinder to sharpen 2 mm to 13 mm bits at 118°, with metal screws and copper rings.
Pros
- Fits 4-1/2 in (115 mm) and 5 in (125 mm) angle grinders
- Sharpens 2 mm to 13 mm bits at a 118° angle
- Integrated molding with metal screws and copper rings, which the maker says makes it more durable
- Pack of 2 in orange
Cons
- No warranty term is stated
- Needs an angle grinder; it sharpens nothing on its own
- No stated speed or motor, since the grinder supplies the power
- No grinding wheel type is stated
Other machines to compare
Drill Bits SharpenerCheck price on Amazon
Drill Doctor 350X Electric Drill Bit SharpenerCheck price on Amazon
Drill Doctor 750X Drill Bit SharpenerCheck price on Amazon
Drill Doctor 500X Drill Bit Sharpener for 3/32 to 1/2 InchCheck price on Amazon
Electric Drill Bit SharpenerCheck price on Amazon
Specs compared
| Model | HQ Score | Power | Bit range | Point angle | Wheels | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| VEVOR MR-20G | 9.6/10 | DC motor, 4500 rpm | 3-20 mm | 95°-135° | CBN and SDC | 20.1 lb | Not stated |
| MDPSDS RS-1 | 9.5/10 | Electric, plug-in | 1/8-15/32 in | 130° | Grinding wheel included | Not stated | Not stated |
| Generic HZRE21DBUS | 9.4/10 | 95W, 1500 rpm | 3-12 mm | 118° | Not stated | 2.6 lb | Not stated |
| VOUSXLLEZ MZQ001 | 9.4/10 | Powered by an electric drill | 5/64-5/8 in | Not stated | 4 diamond discs | Not stated | Not stated |
| smartang Grinder Jig | 9.3/10 | Angle grinder mount | 2-13 mm | 118° | Not stated | Not stated | Not stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 6 November 2026.
Buying guide: best drill bit sharpener for home use
Match the sharpener to your bits
Start with the bits you own. The VEVOR MR-20G covers 3 mm to 20 mm, the VOUSXLLEZ MZQ001 covers 2 mm to 16 mm, the smartang jig covers 2 mm to 13 mm, the Generic HZRE21DBUS covers 3 mm to 12 mm and the MDPSDS RS-1 covers 1/8 in to 15/32 in. Check the bit material too: the MDPSDS RS-1 lists high-speed steel, carbide, hardened steel and high carbon steel, while the Generic HZRE21DBUS lists HSS and carbon steel only.
Electric machine or grinder jig
The VEVOR MR-20G, the MDPSDS RS-1 and the Generic HZRE21DBUS each run on their own power. The VOUSXLLEZ MZQ001 runs from an electric drill, and the smartang jig mounts on an angle grinder. If you already own the grinder or the drill, the jig or the drill-powered pick costs you no extra motor; if you want a machine that works alone, pick a plug-in model.
Angle control matters
A sharpener that holds the angle for you beats one that leaves it to your hand. The MDPSDS RS-1 uses a positioning plate to hold a 130° angle, the VEVOR MR-20G adjusts from 95° to 135° with positioner pins for 4 lip relief angles, and the Generic HZRE21DBUS and the smartang jig both work at 118°. The VOUSXLLEZ MZQ001 states no point angle, so check the listing before you buy it for angle-critical work.
Wheels and wear parts
Grinding wheels wear, so check what comes with the sharpener and what it fits. The VEVOR MR-20G comes with CBN and SDC wheels, the VOUSXLLEZ MZQ001 comes with 4 diamond discs, and the MDPSDS RS-1 includes grinding wheel accessories for a worn wheel. The smartang jig uses the wheel on your angle grinder, and the Generic HZRE21DBUS states no wheel type.
Where you will sharpen
Size and weight decide where a sharpener lives. The Generic HZRE21DBUS weighs 2.6 lb in a 4.7 x 4.7 x 6.3 in body, the VEVOR MR-20G weighs 20.1 lb in an 11.4 x 5.7 x 6.3 in body, and the smartang jig measures 5.5 x 5.5 x 1.18 in. The MDPSDS RS-1 and the VOUSXLLEZ MZQ001 state no dimensions or weight, so plan bench space from the stated sizes where you can.
Project Match
Match the pick to the work you do at home:
- Bits from 3 mm to 20 mm in a home workshop: VEVOR MR-20G, with 18 collets and CBN and SDC wheels.
- Common twist bits at home: MDPSDS RS-1, for 1/8 in to 15/32 in bits at 130°.
- Small plug-in machine for HSS bits: Generic HZRE21DBUS, 95 W at 1500 rpm for 3 mm to 12 mm bits.
- Bits, knives and scissors with an electric drill: VOUSXLLEZ MZQ001, with 4 diamond discs.
- Quick sharpening with an angle grinder: smartang jig, for 4-1/2 in and 5 in grinders.
How the scores add up
Each sharpener is scored on performance, build, value, safety and warranty. How we pick explains the weights, and a spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VEVOR MR-20G | 9.6 | 32 | 22 | 20 | 4 | 0 |
| MDPSDS RS-1 | 9.5 | 28 | 20 | 20 | 5 | 0 |
| Generic HZRE21DBUS | 9.4 | 29 | 20 | 20 | 0 | 0 |
| VOUSXLLEZ MZQ001 | 9.4 | 26 | 19 | 19 | 3 | 0 |
| smartang Grinder Jig | 9.3 | 23 | 21 | 18 | 0 | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.
FAQ: lasers and CNC
Which is the best drill bit sharpener?
The VEVOR MR-20G leads this group: 3 mm to 20 mm range, 18 collets, 95° to 135° point angle adjustment and CBN and SDC wheels. If you want a smaller plug-in machine, the Generic HZRE21DBUS covers 3 mm to 12 mm at 95 W and 1500 rpm.
Is a drill bit sharpener worth it?
Yes, if you own bits you would otherwise replace. The MDPSDS RS-1 listing says sharpening extends the service life of a bit, and the VOUSXLLEZ MZQ001 listing says it repairs worn bits and cuts the cost of frequent replacement. The value is in the bits you keep using.
How do you use a drill bit sharpener?
Hold the bit, press it down against the wheel and feel the friction, as the MDPSDS RS-1 listing describes. With the smartang jig, put the jig on the grinder, tighten the screws and grind at 118°. Keep the angle the sharpener sets: 130° on the MDPSDS RS-1, 118° on the Generic HZRE21DBUS and the smartang jig, or the 95° to 135° range you set on the VEVOR MR-20G.
How to use an electric drill bit sharpener?
Plug it in and switch it on: the MDPSDS RS-1 uses a one-touch switch and a non-slip base, and the Generic HZRE21DBUS runs at 1500 rpm on 120 V and 60 Hz. Feed the bit into the slot for its size, hold the angle the machine sets, and check the edge after a pass.
How do you use a multipurpose drill bit sharpener?
Use the right groove or disc for the tool: the VOUSXLLEZ MZQ001 has 3 grinding grooves and 4 diamond discs for bits from 5/64 in to 5/8 in, and the same tool sharpens kitchen knives and scissors. It runs from an electric drill, so fit it to the drill, hold the tool steady on the bottom plate and grind in short passes.
Related: CNC tooling, collet vs drill chuck for CNC, HSS vs cobalt end mill, best center drill countersink set and spot drill vs center drill.




