Best Drill Bit for Cutting Glass (2026): 5 Diamond Sets Compared
Five diamond drill bit sets for glass, ceramic tile and stone, compared by sizes, shank, cooling and rated speed, from what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallGreywolf 10-Piece Set9.6/10View on Amazon - 2
Best for Tile and GlassFarhigh 6-Piece Set9.6/10View on Amazon - 3
Best Speed RangeNOBVIAM 6-Piece Set9.5/10View on Amazon - 4
Best Small SizesXIANFENGHU 10-Pc Set9.4/10View on Amazon
A glass panel, a bottle, a tile and a planter all ask for the same thing: a clean round hole with no crack running out from the edge. The wrong bit skates across the surface, chips the rim and leaves a rough edge that sanding will not fix. The best drill bit for cutting glass is a diamond bit that starts slow, stays cool and cuts with grit rather than teeth, and this guide compares diamond sets that state glass in their listing, side by side on sizes, shank, cooling and rated speed.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you.
Quick picks
- Best Overall Greywolf 10-Piece Set: 10 pieces from 3/16 to 1/2 in, with 5 core bits, 5 tile bits, cooling wax and a storage case. Check price on Amazon
- Best for Tile and Glass Farhigh 6-Piece Set: 6 pieces with a carbide-tipped centering bit, vacuum-brazed grit and a cooling wax core. Check price on Amazon
- Best Speed Range NOBVIAM 6-Piece Set: Rated at 1,600 to 5,000 RPM, with 5 diamond bits, 1 carbide-tipped bit and a round shank. Check price on Amazon
- Best Small Sizes XIANFENGHU 10-Pc Set: Sizes from 1/8 to 1/2 in, for a rotary tool at 500 to 1,000 RPM and an electric drill at 500 to 1,500 RPM. Check price on Amazon
Machines on the list

Greywolf 10 pcs Diamond Drill bit Set
A 10-piece diamond drill bit set with 5 core bits and 5 tile bits, cooling wax, a 1/4 in hex shank and a storage case.
Pros
- Core bits in 1/4, 5/16, 3/8 and 1/2 in, plus tile bits from 3/16 in, for glass, ceramic, porcelain, marble and granite
- Cooling wax in the bit, stated to cut friction by 60% on glass and ceramic
- 1/4 in hex shank fits corded drills, cordless drills, drill presses and angle grinders
- Storage case with a sliding block for a tool wall, for easy viewing and access
Cons
- No rated speed is stated, so the listing gives no RPM range to follow
- Tile bits and core bits share one case, so sizes need checking before a job
- No warranty term is stated
- No carbide-tipped centering bit is included for starting a hole

6 Pcs Diamond Drill Bit Set,1/4",5/16",3/8",1/2"
A 6-piece diamond drill bit set in 1/4, 5/16, 3/8 and 1/2 in, with a 1/4 in carbide-tipped bit for centering and a cooling wax core.
Pros
- Two 1/4 in diamond bits plus a 1/4 in carbide-tipped bit for centering a hole
- C45 high-carbon steel body, stated for extra-high hardness and flexural strength
- Vacuum brazing, stated to give 3 times the lifespan of standard tile bits
- Cooling wax core supports short dry drilling, with water cooling recommended for hard stone
Cons
- No rated speed is stated
- No warranty term is stated
- Suits standard anchor sizes, so the range stops at 1/2 in with no smaller bit for fine holes
- Dry drilling is for short tasks only; hard stone still needs water cooling

NOBVIAM 6-Piece Dry Diamond Drill Bit Set
A 6-piece set with 5 diamond hole saw bits and 1 carbide-tipped bit, vacuum-brazed grit, cooling wax and a round shank, rated at 1,600 to 5,000 RPM.
Pros
- A stated speed range of 1,600 to 5,000 RPM for better control
- 5 diamond bits plus 1 carbide-tipped bit for tile, glass, ceramic and stone
- Round shank fits most standard drill chucks, cordless drills, corded drills and drill presses
- Cooling wax plus water cooling to reduce heat and extend bit life
Cons
- Hammer mode is not allowed, which rules out hammer drilling
- No bit smaller than 1/4 in, so fine holes need another set
- The maker calls for water cooling, so a dry hole still needs water at hand
- No bit length is stated for deep holes

REKCKRUL 5-Pack Diamond Drill Bits Set 1/4 5/16
A 5-pack of diamond hole saw bits in 1/4, 5/16, 3/8 and 1/2 in, with a 1/4 in hex shank, cooling lubricant and dry and wet drilling.
Pros
- 1/4 in hex shank for a firm grip in electric drills, cordless drills and benchtop drills
- Rated at 2,000 RPM or higher for cutting ceramic, porcelain, glass, marble and granite
- Cooling lubricant built in, with water for longer bit life
- Clear size markings for easy identification across the 5 pieces
Cons
- Rated for 2,000 RPM or higher, so slow rotary work below that range is not covered
- No bit smaller than 1/4 in for fine holes
- Dry drilling relies on the built-in lubricant, and water is still called for to extend bit life
- No storage case is named in the listing

XIANFENGHU Diamond Drill Bits for Glass
A 10-piece diamond hole saw kit in sizes from 1/8 in to 1/2 in, for glass, ceramic, tile, pots, marble, bottles, porcelain, granite and stone.
Pros
- Smallest size here at 1/8 in, with sizes to 1/2 in for fine holes
- Low RPM guidance: 500 to 1,000 RPM with a rotary tool, 500 to 1,500 RPM with an electric drill
- Industrial-grade diamond grit on carbon 45# steel for glass, ceramic, stone and tile
- Covers bottles, jars, pots and tile in one kit
Cons
- Rotary work is limited to 500 to 1,000 RPM
- No carbide-tipped bit is included for centering a hole
- No cooling wax or water cooling is named in the listing
- No storage case is named in the listing
Specs compared
| Model | HQ Score | Pieces | Sizes | Shank | Rated speed | Cooling | Warranty |
|---|---|---|---|---|---|---|---|
| Greywolf 10-Piece Set | 9.6/10 | 10 | 3/16 to 1/2 in | 1/4 in hex shank | Not stated | Cooling wax | Not stated |
| Farhigh 6-Piece Set | 9.6/10 | 6 | 1/4 to 1/2 in | Not stated | Not stated | Cooling wax core | Not stated |
| NOBVIAM 6-Piece Set | 9.5/10 | 6 | 1/4 to 1/2 in | Round shank | 1,600 to 5,000 RPM | Cooling wax | Not stated |
| REKCKRUL 5-Pack Set | 9.5/10 | 5 | 1/4 to 1/2 in | 1/4 in hex shank | 2,000 RPM or higher | Cooling lubricant | Not stated |
| XIANFENGHU 10-Pc Set | 9.4/10 | 10 | 1/8 to 1/2 in | Not stated | 500 to 1,500 RPM | Not stated | Not stated |
These numbers come straight from each maker’s listing and are rated, not measured by us (22 November 2026).
How the picks were scored
Each pick is scored on performance, build, value, safety and warranty, with performance carrying the most weight and warranty scoring only where a term is stated. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Greywolf 10-Piece Set | 9.6 | 32 | 22 | 21 | 5 | 0 |
| Farhigh 6-Piece Set | 9.6 | 30 | 22 | 20 | 5 | 0 |
| NOBVIAM 6-Piece Set | 9.5 | 29 | 21 | 20 | 5 | 0 |
| REKCKRUL 5-Pack Set | 9.5 | 28 | 20 | 20 | 4 | 0 |
| XIANFENGHU 10-Pc Set | 9.4 | 27 | 19 | 19 | 4 | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total.
How to choose the best drill bit for cutting glass
Match the bit to the glass job
Glass work covers more than flat sheets. The sets in this guide name glass bottles, jars, pots, planters, tile, porcelain, ceramic, marble, granite, quartz, stone, masonry and brick, so start from the piece in front of you and check that the set names it. A bottle job calls for a small bit and a low speed, while a tile or countertop job calls for a bit that holds its edge through hard stone.
Sizes and shanks
Sizes in this guide run from 1/8 in to 1/2 in. The smallest size stated here is 1/8 in, in the XIANFENGHU kit, while the other sets start at 3/16 in or 1/4 in and run to 1/2 in. Shank type decides which chuck holds the bit: Greywolf and REKCKRUL use a 1/4 in hex shank, NOBVIAM uses a round shank that fits most standard drill chucks, and Farhigh and XIANFENGHU state no shank type. See drill bit shank types for how each shank fits a chuck.
Cooling and starting the hole
Heat is what cracks glass, so cooling matters as much as grit. Greywolf, Farhigh and NOBVIAM build cooling wax into the bit, REKCKRUL builds in a cooling lubricant, and water cooling is recommended alongside wax or lubricant for longer bit life and smoother cutting. NOBVIAM and REKCKRUL both call for starting at a 45-degree angle, then moving upright, and NOBVIAM adds a starter dimple before the bit bites. XIANFENGHU names no cooling method, so plan for water at hand with that kit. See diamond bit drill tips for the starting steps.
What the listings do not state
None of the five picks states a warranty term, so warranty scores nothing in this guide. No bit length is stated for any pick, and only NOBVIAM states a weight, at 0.2 pounds. Rated speed is stated for three of the picks and not stated for Greywolf and Farhigh.
Glass dust and sharp edges call for eye protection and a steady setup. Clamp the piece, start at a low speed, keep the bit cool with water where the maker calls for it, and clear chips before they bind. Never use hammer mode where the maker rules it out.
Project Match
- Glass bottles and jars: XIANFENGHU, with sizes from 1/8 in, and Greywolf, which names glass bottles among its uses.
- Bathroom tile and fixtures: Farhigh, for towel bars, mirrors and floating shelves, and NOBVIAM, for bathroom tile and kitchen countertops.
- Pots and planters: Farhigh and NOBVIAM, which both name pots and planters, and XIANFENGHU, which names pots.
- Glass art and crafts: Greywolf, for custom glass artwork, and REKCKRUL, for small crafts and large renovations.
- Stone and countertops: NOBVIAM, for granite, marble and quartz stone, and Farhigh, for granite, marble and quartz.
FAQ: lasers and CNC
What size drill bit do I need for glass?
Start from the hole you need. Sizes in this guide run from 1/8 in to 1/2 in. For a small hole in a bottle, the 1/8 in size in the XIANFENGHU kit is the smallest stated here. For anchor holes, the 1/4 in, 5/16 in, 3/8 in and 1/2 in sizes in the other sets cover standard anchor work.
Can I use these drill bits with a regular drill?
Yes, where the listing states it. NOBVIAM uses a round shank that fits most standard drill chucks and works with cordless drills, corded drills and drill presses. REKCKRUL uses a 1/4 in hex shank for electric drills, cordless drills and benchtop drills, Greywolf uses a 1/4 in hex shank for corded drills, cordless drills, drill presses and angle grinders, and XIANFENGHU clamps into any standard power drill. See types of drill bits for each bit type.
Do I need water when drilling glass?
Water cooling is recommended by the makers that name it. Farhigh states a cooling wax core that supports short dry drilling, with water recommended for hard stone. REKCKRUL states dry drilling with a built-in cooling lubricant, with water for extended bit life. NOBVIAM calls for water cooling to reduce heat and extend bit life. XIANFENGHU names no cooling method.
What speed should I use for glass?
Follow the range on the listing for the set you buy, since the ranges differ. XIANFENGHU states 500 to 1,000 RPM with a rotary tool and 500 to 1,500 RPM with an electric drill. NOBVIAM states 1,600 to 5,000 RPM. REKCKRUL states 2,000 RPM or higher. Greywolf and Farhigh state no speed.
Which sets include a carbide-tipped bit?
Farhigh and NOBVIAM each include 1 carbide-tipped bit. Farhigh includes a 1/4 in carbide-tipped bit for centering, and NOBVIAM includes 1 carbide-tipped bit alongside 5 diamond bits. The other sets state no carbide-tipped bit.
Related: best drill bit for glass bottles, best drill bit for tiles, best drill bit for marble, diamond bit drill tips and the CNC tooling hub.




