Best Drill Bit for Drilling Holes in Glass (2026): 5 Diamond Sets Compared
Five diamond drill bit sets for glass compared by hole sizes, shank type, cooling and stated materials, from small jewelry holes to larger core holes.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDECKRKAT 5-Piece Set9.5/10View on Amazon - 2
Best Hex ShankVRYTOR 6-Piece Set9.5/10View on Amazon - 3
Best for Repeat HolesDKIBBITH 5-Pack9.4/10View on Amazon - 4
Best for Small HolesSworker 8-Piece Set9.2/10View on Amazon
A clean hole in glass starts long before the drill spins. The piece has to sit steady, the mark has to land where the design needs it, and the bit has to cut without chipping the edge or wandering across the surface. Whether the project is a pendant, a bottle lamp or a drilled panel for a frame, the best drill bit for drilling holes in glass is the one whose size, shank and cooling match the work in front of you.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall DECKRKAT 5-Piece Set: Five sizes from 3/16 in to 1/2 in with wax coolant, vacuum brazed diamond and a round shank for drills, angle grinders and bench drills. Check price on Amazon
- Best Hex Shank VRYTOR 6-Piece Set: Hex shank for a firm grip, cooling wax for dry or wet drilling, and sizes from 1/4 in to 1/2 in plus a cross drill bit for positioning. Check price on Amazon
- Best for Repeat Holes DKIBBITH 5-Pack: Five 1/4 in bits in one pack with wax lubricant inside each bit, a round shank, side flutes and a depth mark. Check price on Amazon
- Best for Small Holes Sworker 8-Piece Set: Eight 120-grit bits in 1 mm, 1.5 mm, 2 mm and 2.5 mm sizes with 4 collets for rotary tools, made for sea glass and jewelry work. Check price on Amazon
Machines on the list

5 Piece Diamond Drill Bits Set
A 5-piece diamond core set with sizes from 3/16 in to 1/2 in, wax coolant inside each bit and a round shank for drills, angle grinders and bench drills.
Pros
- Five sizes in one set: 3/16 in, 1/4 in, 5/16 in, 3/8 in and 1/2 in
- Vacuum brazed diamond stated for clean, precise drilling in glass and tile
- Wax lubricant and integrated coolant help the bit stay cool in dry drilling
- Side flute removes debris and a depth mark helps with precise work
Cons
- Each size comes once, so a worn size means a new set or a single replacement
- Maker advises pausing to cool the bit after each hole, which slows repeat work
- Round shank only; no hex option for extra grip in the chuck
- Not for wood, as the maker states

6 PCS Dry Diamond Drill Bits Set for Ceramic
A 6-piece dry diamond set with a hex shank, cooling wax for dry or wet drilling, and sizes from 1/4 in to 1/2 in plus a cross drill bit for positioning.
Pros
- Hex shank stated to grip firmly and reduce slipping during drilling
- Vacuum brazing bonds the diamonds to an alloy steel shank
- Cooling wax supports dry drilling, with water as an added option
- Two 1/4 in bits plus a cross bit for positioning in the same set
Cons
- No 3/16 in size, so the smallest hole here is 1/4 in
- Cross bit is for positioning, not a full extra core size
- No storage case is stated
- No warranty term is stated

DKIBBITH 5 Packs 1/4" Diamond Drill Bits for Tile
A 5-pack of 1/4 in dry diamond core bits with wax lubricant inside each bit, a 1/4 in round shank, side flutes, a depth mark and a storage case.
Pros
- Five bits of the same 1/4 in (6 mm) size for repeat holes
- Wax lubricant inside melts to cool the tip and help prevent diamond loss
- Side flutes stated to remove debris faster
- Storage case included for keeping the set together
Cons
- One size only: every hole is 1/4 in
- Round shank, with no hex option
- No smaller or larger core sizes for mixed projects
- No warranty term is stated

Diamond Drill Bits for Glass
A 6-piece set of 1/2 in diamond hole saws in carbon 45# steel, with stated speed ranges for rotary tools and electric drills and water lubrication advised.
Pros
- Six 1/2 in (12 mm) hole saws for repeat larger holes
- Industrial-grade diamond grit on carbon 45# steel
- Stated speeds: 500-1000 RPM for rotary tools, 500-1500 RPM for electric drills
- Clamps into a standard power drill, as the maker states
Cons
- One size only: every hole is 1/2 in
- Water lubrication is advised, so dry drilling is not the stated method
- Shank type is not stated
- No storage case is stated

Sworker Diamond Drill Bits 1mm 1.5mm 2mm 2.5mm 2
An 8-piece set of 120-grit diamond twist bits in 1 mm, 1.5 mm, 2 mm and 2.5 mm sizes with 4 brass collets for rotary tools, made for sea glass and jewelry.
Pros
- Four small sizes with 2 bits each: 1 mm, 1.5 mm, 2 mm and 2.5 mm
- 120-grit diamond coating stated for smooth, precise holes
- Matching brass collets for a firm fit in rotary tools
- 5-Year Returnless Replacement stated
Cons
- Largest hole is 2.5 mm, far below core-bit sizes
- Made for rotary tools with collets, not standard drill chucks
- Water cooling is advised for thick glass and stone
- Twist design suits small work, not larger core holes
Specs compared
| Model | HQ Score | Sizes | Shank | Cooling | Stated materials | Warranty |
|---|---|---|---|---|---|---|
| DECKRKAT 5-Piece Set | 9.5/10 | 3/16 in, 1/4 in, 5/16 in, 3/8 in, 1/2 in | Round | Wax lubricant, integrated coolant | Glass, tile, ceramics, stone, masonry brick | Not stated |
| VRYTOR 6-Piece Set | 9.5/10 | 1/4 in (x2), 5/16 in, 3/8 in, 1/2 in, cross bit | Hex | Cooling wax, dry or wet drilling | Glass, tile, ceramic, porcelain, granite, marble, flower pots, masonry | Not stated |
| DKIBBITH 5-Pack | 9.4/10 | 1/4 in (6 mm), 5 pieces | Round, 1/4 in | Wax lubricant inside | Glass, porcelain, granite, ceramic, marble, stone, masonry brick | Not stated |
| XIANFENGHU 6-Pack | 9.3/10 | 1/2 in (12 mm), 6 pieces | Not stated | Water lubrication advised | Glass, ceramic, concrete, stone, tile | Not stated |
| Sworker 8-Piece Set | 9.2/10 | 1 mm, 1.5 mm, 2 mm, 2.5 mm, 2 each | Collets for rotary tools | Water cooling advised | Sea glass, shells, agate, quartz, amethyst, gemstones, porcelain, ceramic | 5-Year Returnless Replacement |
Specs are what each manufacturer publishes as its rating on the listing, collected 22 November 2026.
Size first: core bits and small twist bits do different jobs
Four of these sets are core bits for holes from 3/16 in to 1/2 in. The fifth is a small twist set from 1 mm to 2.5 mm for jewelry-scale work. Those ranges barely overlap, so the first choice is the hole size your project needs, and the second is how you will keep the bit cool. Two sets state built-in wax for dry drilling, one adds water as an option, and two advise water lubrication or water cooling.
Buying guide: best drill bit for drilling holes in glass
Match the size to the project
For mixed work, a set with several sizes avoids a second purchase mid-project. The DECKRKAT set spans 3/16 in to 1/2 in, and the VRYTOR set spans 1/4 in to 1/2 in with two 1/4 in bits. Repeat work at one size suits the DKIBBITH 5-pack at 1/4 in or the XIANFENGHU 6-pack at 1/2 in. Jewelry holes from 1 mm to 2.5 mm belong to the Sworker twist set.
Shank and tool fit
Round shanks fit popular electric drills, and the DECKRKAT maker also states angle grinders and bench drills. A hex shank, as on the VRYTOR set, is stated to grip more firmly and reduce slipping. The Sworker bits use brass collets in rotary tools. The XIANFENGHU maker states that its hole saws clamp into a standard power drill and gives speed ranges of 500-1000 RPM for rotary tools and 500-1500 RPM for electric drills.
Cooling: wax, water, or both
Heat is the enemy of a clean edge. The DKIBBITH and DECKRKAT bits carry wax lubricant inside, stated to melt, cool the tip and help prevent diamond loss. The VRYTOR set pairs cooling wax with the option to add water. The XIANFENGHU maker advises water lubrication, and the Sworker maker advises submerging thick glass and stone in water or using continuous water flow. The DECKRKAT maker also advises pausing to cool the bit after each hole.
Materials each maker states
All five sets state glass. Beyond glass, the core sets state tile, ceramic, porcelain, granite, marble and stone in various combinations, and the DECKRKAT set states masonry brick while excluding wood. The Sworker set states sea glass, shells, agate, quartz, amethyst and gemstones. Match the stated list to your material rather than assuming a bit suits everything.
Warranty and what is in the box
Only the Sworker set states a warranty term: 5-Year Returnless Replacement. Storage cases are stated for the DECKRKAT and DKIBBITH sets. For the other sets, a case is not stated, so plan your own storage if that matters to your workflow.
Drilling glass makes sharp edges and fine dust. Wear eye protection, support the piece so it cannot shift, and keep the work area clear of loose shards. Follow the speed and cooling guidance the maker states for your set, and handle drilled edges with care until they are finished.
Project Match
- Bottle lamps and larger glass holes at 1/2 in: XIANFENGHU 6-Pack, with water lubrication as the maker advises.
- Mixed glass, tile and ceramic work from 3/16 in to 1/2 in: DECKRKAT 5-Piece Set.
- Mirrors, backsplashes and flower pot drainage from 1/4 in to 1/2 in: VRYTOR 6-Piece Set with hex shank.
- Repeat 1/4 in holes in glass and stone: DKIBBITH 5-Pack.
- Sea glass pendants and jewelry holes from 1 mm to 2.5 mm: Sworker 8-Piece Set.
How the scores add up
Each set is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the maker does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DECKRKAT 5-Piece Set | 9.5 | 29 | 21 | 21 | 0 | 0 |
| VRYTOR 6-Piece Set | 9.5 | 29 | 21 | 20 | 0 | 0 |
| DKIBBITH 5-Pack | 9.4 | 26 | 20 | 20 | 0 | 0 |
| XIANFENGHU 6-Pack | 9.3 | 26 | 19 | 19 | 0 | 0 |
| Sworker 8-Piece Set | 9.2 | 19 | 18 | 15 | 0 | 3 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.
FAQ: lasers and CNC
What size drill bit do I need for holes in glass?
It depends on the project. Core sets here cover 3/16 in to 1/2 in for panels, bottles and pots, while the Sworker twist set covers 1 mm to 2.5 mm for jewelry. Pick the set whose stated sizes include the hole you need.
Can these bits drill glass dry?
Some can, as stated. The DKIBBITH, DECKRKAT and VRYTOR bits carry wax lubricant or cooling wax for dry drilling. The XIANFENGHU maker advises water lubrication, and the Sworker maker advises water cooling for thick glass and stone.
What speed should I use?
Only one maker states speeds: XIANFENGHU lists 500-1000 RPM for rotary tools and 500-1500 RPM for electric drills. For the other sets, a speed range is not stated, so follow the guidance that comes with your set.
Which set fits a rotary tool?
The Sworker set is made for rotary tools, with brass collets matched to each size. The XIANFENGHU maker also states rotary tool use at 500-1000 RPM. The core sets state electric drills, and DECKRKAT also states angle grinders and bench drills.
Do any of these sets state a warranty?
Yes. The Sworker set states a 5-Year Returnless Replacement. For the other four sets, a warranty term is not stated.
Related: best drill bit for cutting glass, best drill bit for glass bottles, best drill bit for marble, diamond bit drill tips and the CNC tooling hub.




