Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Router Bit Sizes Chart: Diameter and Shank

A router bit sizes chart pairs each cutting size with its shank size, so the bit fits the router collet and cuts the profile the job needs.

Router Bit Sizes Chart: Diameter and Shank
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1SKIL 15 Pc. Carbide-Tipped Router Bit Set-RTB7501SKIL 15 Pc. Carbide-Tipped Router Bit Set-RTB75019.6/10View on Amazon
  2. 2BOSCH RBS006 6-Piece 1/4 In. Shank Carbide-TippedBOSCH RBS006 6-Piece 1/4 In. Shank Carbide-Tipped9.6/10View on Amazon
  3. 3CSOOM 30 Pieces Router Bits SetCSOOM 30 Pieces Router Bits Set9.6/10View on Amazon
  4. 4KOWOOD Router Bits Set of 40 PiecesKOWOOD Router Bits Set of 40 Pieces9.5/10View on Amazon

A router bit sizes chart answers the question before a cut: which diameter cuts the profile, and which shank fits the router collet. The chart pairs each cutting size with its shank size, so the shank matches the collet and the profile matches the edge. Read the diameter for the shape and the shank for the fit, then check the profile name against the edge.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

SKIL 15 Pc. Carbide-Tipped Router Bit Set-RTB7501

SKIL 15 Pc. Carbide-Tipped Router Bit Set-RTB7501

Skil9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-piece carbide-tipped set that states a cutting size for every profile.

Pros

  • States a size for every bit in the set
  • Carbide-tipped edges, precision-ground to stay sharp longer
  • Fully heat-treated shanks and bodies for durability
  • Interlocking case with a clear lid for easy identification

Cons

  • 1/4 in shank only
  • Straight bits top out at 3/4 in
  • Roundover bits top out at 1/2 in
  • No warranty term is stated
BOSCH RBS006 6-Piece 1/4 In. Shank Carbide-Tipped

BOSCH RBS006 6-Piece 1/4 In. Shank Carbide-Tipped

Bosch9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-piece carbide-tipped set in 1/4 in shank, covering straight, trimming, decorative edging and dovetail joinery.

Pros

  • Micrograin carbide tips for wear resistance and sharper edges
  • Ball-bearing pilot guides the bit along the edge
  • Balanced cut design helps minimize kickback
  • Reusable storage case, wood base, clear plastic top

Cons

  • 6 pieces only, the smallest set here
  • 1/4 in shank only
  • States no cutting diameter per profile
  • No warranty term is stated
CSOOM 30 Pieces Router Bits Set

CSOOM 30 Pieces Router Bits Set

CSOOM9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 30-piece set in 1/4 in shank with a steel body and YG6X tungsten steel alloy.

Pros

  • 30 pieces: roundover, chamfer, raised panel, flush trim, flattening
  • YG6X tungsten steel alloy and a durable steel body
  • 1/4 in shank provides stability and reduces vibration
  • Suits solid wood, MDF, laminate, particle board, plywood and acrylic

Cons

  • Wood carving only; not for drilling, steel, iron or sand
  • States no cutting diameter per profile
  • 1/4 in shank only
  • No storage case is stated
KOWOOD Router Bits Set of 40 Pieces

KOWOOD Router Bits Set of 40 Pieces

KOWOOD9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 40-piece carbide set in 1/2 in shank with an aluminum carry case, for trimming, edging and grooving.

Pros

  • 40 pieces, the largest set here
  • 1/2 in shank suits benchtop router tables
  • Carbide for clean, smooth, accurate trimming, edging, grooving
  • Aluminum carry case included

Cons

  • 1/2 in shank only
  • States no cutting diameter per profile
  • 40 pieces need the most storage space of the sets here
  • No MDF or acrylic use is named

Router bit sizes chart

The chart lists the cutting sizes the Skil set states for each profile. Match the shank to the collet, then pick the size for the profile.

Profile Cutting size Shank
Straight 1/4, 1/2, 3/4 in 1/4 in
Cove 1/4, 1/2 in 1/4 in
Dovetail 3/8, 1/2 in 1/4 in
Roundover 1/4, 1/2, 3/8 in 1/4 in
V-Groove 5/8 in 1/4 in
Corebox 1/4 in 1/4 in
Chamfer 45-degree angle 1/4 in
Rabbeting 1/4 in 1/4 in
Roman Ogee 1/4 in 1/4 in

Figures as stated by the makers. Shank sizes here run 1/2 in on the KOWOOD set and 1/4 in on the Bosch, CSOOM and Skil sets.

How to read the chart

Start with the shank: a bit that does not fit the collet cannot cut. The KOWOOD set uses a 1/2 in shank, and the maker lists it as suitable for benchtop router tables from major brands. The Bosch, CSOOM and Skil sets use a 1/4 in shank, and the Skil set states it works with routers that accept 1/4 in shank bits. Check the collet size on the router before ordering. See the router bit shank sizes explained guide for the full shank list.

Then read the size for the profile. The Skil set states a size for each profile it includes. The Bosch set covers straight, trimming, decorative edging and dovetail joinery, and the CSOOM set covers roundover, chamfer, raised panel, flush trim and flattening. Pick the size that matches the edge. See the router bit speed chart for speeds by material and diameter.

Router bit sets for the chart

These sets cover the chart: the Skil set states a size for each profile, the KOWOOD set covers the 1/2 in shank, and the Bosch and CSOOM sets cover the 1/4 in shank.

FAQ: lasers and CNC

What shank size does a router bit need?

Match the shank to the collet: the KOWOOD set uses a 1/2 in shank, and the Bosch, CSOOM and Skil sets use a 1/4 in shank.

What diameters come in the Skil set?

The Skil set states straight bits at 1/4, 1/2 and 3/4 in, cove bits at 1/4 and 1/2 in, dovetail bits at 3/8 and 1/2 in and roundover bits at 1/4, 1/2 and 3/8 in, plus a 5/8 in V-groove bit, 1/4 in corebox, rabbeting and Roman ogee bits and a 45-degree chamfer bit.

Which materials can these bits cut?

The KOWOOD set suits woods, laminate, particleboard and plywood. The CSOOM set suits solid wood, MDF, laminate, particle board, plywood and acrylic, but its bits are for wood carving only, not drilling, steel, iron or sand.

How many bits come in each set?

The KOWOOD set has 40 pieces, the CSOOM set has 30 pieces, the Skil set has 15 pieces and the Bosch set has 6 pieces.

Do these sets include a case?

The KOWOOD set comes with an aluminum carry case, the Bosch set with a reusable storage case with a solid wood base and clear plastic top, and the Skil set in an interlocking case with a clear lid. No case is stated for the CSOOM set.

Related: the CNC tooling hub, router bit shank sizes explained and router bit speed chart. Also see best 1 1/2 inch CNC router bit. Also see best bead router bit under 30.

More buying guides

CNC Tooling ·

Router Bit Shank Sizes Explained

Router bit shank sizes decide which bits fit your router, and this guide explains the common sizes, how to match the collet, and the…