Best ABS-Like Resin for 405nm Resin Printer (2026): 5 Picks for Tough Prints
5 ABS-like 405nm resins compared by strength, shrinkage, viscosity, odor and packaging.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallANYCUBIC Pro 2 Resin9.7/10View on Amazon - 2
Best for Tough PartsELEGOO ABS-Like 3.09.7/10View on Amazon - 3
Best Large BottleSUNLU ABS-Like 3KG9.6/10View on Amazon - 4
Best for Heat and ScratchesELEGOO 3.0 Pro Resin9.6/10View on Amazon
A bracket that holds its shape after the print, a figure with clean details, a part that survives a drop on the workshop floor: ABS-like resin is the pick when standard resin is too brittle. This roundup compares the best abs-like resin for 405nm resin printer options on what each listing states, from strength and shrinkage to viscosity, odor and packaging.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall ANYCUBIC Pro 2 Resin: A 4kg bundle with elongation at break up by more than 100% and a stated 365-405nm range for LCD and DLP printers. Check price on Amazon
- Best for Tough Parts ELEGOO ABS-Like 3.0: A 2000g Space Grey resin named for 12K, 14K and 16K printers, with prints that withstand drilling and impacts. Check price on Amazon
- Best Large Bottle SUNLU ABS-Like 3KG: A 3000g grey bottle with a leak-proof design, an air bag around it, and a very light odor. Check price on Amazon
- Best for Heat and Scratches ELEGOO 3.0 Pro Resin: Higher scratch resistance and a heat deformation temperature about 10% higher than ABS-Like 3.0 resin. Check price on Amazon
Machines on the list

ANYCUBIC ABS-Like Resin Pro 2 Bundle
A 4kg bundle of 4 packs of 1kg grey resin, with elongation at break up by more than 100% and a stated 365-405nm range.
Pros
- Elongation at break up by more than 100% over the previous resin
- 4kg bundle: 4 packs of 1kg grey resin
- Stated 365-405nm wavelength range for LCD and DLP printers
- Low viscosity and high flowability for shorter curing times and easier model formation
Cons
- No warranty term in the listing
- No viscosity number stated, only low viscosity
- No shrinkage number stated, only an even lower shrinkage rate
- No shelf life stated

ELEGOO 8K ABS-Like 3.0 3D Printer Resin Space Grey
A 2000g bottle of Space Grey resin for 12K, 14K and 16K Mars, Saturn and Jupiter printers, with viscosity 25-47% lower than ABS-like 1.0 and 2.0.
Pros
- High strength and toughness, with prints that withstand drilling holes and certain impacts
- Viscosity 25-47% lower than ABS-like 1.0 and 2.0 for faster curing and easy peeling from the release film
- States no delamination or separation over time, so no manual stirring is needed
- Compatible with 12K, 14K and 16K Mars, Saturn and Jupiter printers
Cons
- No warranty term in the listing
- No odor statement in the listing
- No shrinkage number stated, only lower volume shrinkage
- No shelf life stated

SUNLU 3000G ABS-Like 3D Printer Resin
A 3000g grey bottle for 2K, 4K, 6K and 8K LCD, DLP and SLA printers, with a leak-proof bottle, an air bag around it, and a very light odor.
Pros
- 3000g bottle, the largest single bottle in this roundup
- Non-brittle with abrasion resistance, named as a first choice for miniature and tiny objects
- Leak-proof bottle design with a tight-fitting air bag around it
- Very light odor, for 2K, 4K, 6K and 8K LCD, DLP and SLA printers
Cons
- No warranty term in the listing
- No viscosity number stated, only excellent fluidity
- No shrinkage number stated, only reduced volume shrinkage
- No shelf life stated

ELEGOO ABS-Like Resin 3.0 Pro
A 1000g grey bottle with higher scratch resistance and a heat deformation temperature about 10% higher than ABS-Like 3.0.
Pros
- Higher scratch resistance, so prints are not easily damaged by daily friction and impact
- Heat deformation temperature about 10% higher than ABS-Like 3.0 resin
- Tough, easy to bend but not easy to break, with high hardness and toughness
- Good fluidity, high dimensional accuracy and minimal warping or shrinkage
Cons
- No warranty term in the listing
- Only 1000g, the smallest bottle in this roundup
- No odor statement in the listing
- No shelf life stated

ELEGOO 8K ABS-Like Resin 3.0
A 2000g bottle of Space Grey resin with the same ABS-Like 3.0 claims as the ELEGOO pick, filed under the Deeplee brand while its title names ELEGOO.
Pros
- Viscosity 25-47% lower than ABS-like 1.0 and 2.0 for fast curing and excellent fluidity
- States higher precision with reduced volume shrinkage
- States ultra-low odor and pure, vivid colors
- 2000g bottle for LCD, MSLA and DLP printers
Cons
- Filed under the Deeplee brand while the title names ELEGOO, so confirm which brand ships
- No warranty term in the listing
- No shrinkage number stated, only reduced volume shrinkage
- No shelf life stated
Other machines to compare
ELEGOO ABS-Like 3.0 3D Printer Resin Clear Green 1000gCheck price on Amazon
SUNLU 1000G ABS Like Resin for 3D PrinterCheck price on Amazon
SUNLU 2000G ABS-Like 3D Printer ResinCheck price on Amazon
SUNLU Upgraded 3000G ABS Like Resin for 3D PrinterCheck price on Amazon
SUNLU ABS Like Resin for 3D PrinterCheck price on Amazon
Specs compared
| Model | HQ Score | Resin | Size | Wavelength | Strength claim | Odor | Packaging |
|---|---|---|---|---|---|---|---|
| ANYCUBIC Pro 2 Resin | 9.7/10 | ABS-Like Pro 2 | 4kg, 4 packs of 1kg | 365-405nm | Elongation at break up by more than 100% | Low odor | Leak-proof safety packaging |
| ELEGOO ABS-Like 3.0 | 9.7/10 | ABS-Like 3.0 | 2000g | 405nm | High strength, drilling and impacts | Not stated | Not stated |
| SUNLU ABS-Like 3KG | 9.6/10 | ABS-Like | 3000g | 405nm | Non-brittle, abrasion resistance | Very light odor | Leak-proof bottle, air bag |
| ELEGOO 3.0 Pro Resin | 9.6/10 | ABS-Like 3.0 Pro | 1000g | 405nm | Scratch and heat resistance | Not stated | Not stated |
| Deeplee ABS-Like 3.0 | 9.6/10 | ABS-Like 3.0 | 2000g | 405nm | Strain and stress resistance | Ultra-low odor | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026. A blank means the listing states no figure for that column.
What the listings tell you, and what they leave out
We read 5 listings. All 5 are ABS-like photopolymer resins for 405nm printers. 2 of the 5 name the same resin, ELEGOO ABS-Like 3.0 in 2000g, and one of those 2 is filed under the Deeplee brand while its title names ELEGOO. Only 1 of the 5 states a wavelength range, Anycubic at 365-405nm, while the rest state 405nm. Only 1 of the 5 gives an elongation figure, Anycubic at more than 100%, and only 1 of the 5 gives a heat figure, ELEGOO Pro at about 10% higher heat deformation temperature. Only 2 of the 5 give a viscosity figure, and both give the same figure: 25-47% lower than ABS-like 1.0 and 2.0. 3 of the 5 state a low odor. No listing states a curing time, a layer exposure time, a bottle shelf life, or a warranty term.
The listings also disagree with the keyword plan in one place: the planned questions ask about UV resistant epoxy, which is a different product from 405nm printer resin, so this roundup answers questions about ABS-like resin instead. Resin is a chemical product, so work in a ventilated space and wear gloves when handling uncured resin, and follow the safety sheet for the resin you buy.
Buying guide: the best abs-like resin for 405nm resin printer
Strength and toughness
ABS-like resin is the pick when standard resin is too brittle, and each listing makes that claim in its own way. Anycubic states elongation at break up by more than 100% over its previous resin, for structural parts, industrial prototype parts and fixtures. ELEGOO states its prints withstand drilling holes and certain impacts, for functional prototypes and mechanical parts. ELEGOO Pro adds higher scratch resistance and a heat deformation temperature about 10% higher than ABS-Like 3.0 resin. SUNLU states its resin is non-brittle with abrasion resistance, and names miniature and tiny objects as its first choice.
Shrinkage and precision
All 5 listings claim low shrinkage and high precision, but none gives a shrinkage number. ELEGOO states lower volume shrinkage for accurate dimensional stability and smooth surface finishes. SUNLU states reduced volume shrinkage during curing for accuracy and smooth surfaces. Anycubic states an even lower shrinkage rate for top-notch precision and sharp, vivid details. Without a number, shrinkage is a claim to compare only by the words each listing uses.
Viscosity and flow
Viscosity decides how fast resin flows back into the print area, and only 2 of the 5 listings give a figure. Both give the same figure: a viscosity 25-47% lower than ABS-like 1.0 and 2.0, which the listings say improves print success and reduces print time. Anycubic states low viscosity and high flowability without a number, for shorter curing times and easier model formation. SUNLU states excellent fluidity for fast curing, also without a number.
Odor and handling
3 of the 5 listings state a low odor: SUNLU states a very light odor, Anycubic states a lower odor formula, and the Deeplee listing states an ultra-low odor. SUNLU and Anycubic also state leak-proof packaging, SUNLU with a tight-fitting air bag around the bottle. ELEGOO states its ABS-like 3.0 does not delaminate or separate over time, which eliminates the need for manual stirring and keeps the color consistent across the model surface.
Project Match
- Structural parts, fixtures and industrial prototypes: ANYCUBIC Pro 2 Resin, with elongation at break up by more than 100%.
- Functional prototypes and mechanical parts that take drilling and impacts: ELEGOO ABS-Like 3.0.
- Miniatures and tiny objects: SUNLU ABS-Like 3KG, which names miniature and tiny objects as its first choice.
- Figures, jewelry and parts that face daily friction and heat: ELEGOO 3.0 Pro Resin, with higher scratch resistance and about 10% higher heat deformation temperature.
- Engineering models and jewelry design on a 2000g bottle: Deeplee ABS-Like 3.0, the same resin as the ELEGOO 2000g pick filed under a different brand.
How the scores add up
Each bottle is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ANYCUBIC Pro 2 Resin | 9.7 | 33 | 22 | 21 | n/a | 0 |
| ELEGOO ABS-Like 3.0 | 9.7 | 32 | 21 | 21 | n/a | 0 |
| SUNLU ABS-Like 3KG | 9.6 | 30 | 21 | 21 | n/a | 0 |
| ELEGOO 3.0 Pro Resin | 9.6 | 32 | 21 | 19 | n/a | 0 |
| Deeplee ABS-Like 3.0 | 9.6 | 29 | 20 | 21 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What is ABS-like resin?
ABS-like resin is a 405nm photopolymer resin made to behave more like ABS plastic: tougher and less brittle than standard resin. All 5 resins here are ABS-like 405nm resins for LCD, DLP or SLA printers.
Will ABS-like resin work in my 405nm printer?
All 5 listings state 405nm curing. Anycubic states a 365-405nm range, and ELEGOO states compatibility with LCD and DLP printers using 405nm light-curing technology. Check your printer manual for its wavelength before buying.
Is ABS-like resin stronger than standard resin?
That is the claim each listing makes. Anycubic states elongation at break up by more than 100% over its previous resin, ELEGOO states its prints withstand drilling and certain impacts, and SUNLU states its resin is non-brittle with abrasion resistance.
What does low shrinkage mean for my prints?
Less distortion and sharper details, as the listings describe it. ELEGOO states lower volume shrinkage for accurate dimensional stability, SUNLU states reduced volume shrinkage for accuracy, and Anycubic states an even lower shrinkage rate for top-notch precision.
Do I need to stir ABS-like resin before printing?
ELEGOO states its ABS-like 3.0 does not delaminate or separate over time, which eliminates the need for manual stirring. The other listings state no stirring guidance, so follow the instructions on the bottle you buy.
Related: the 3D printer hub, best 3D printing resins, and SLA vs DLP 3D printer. Also see our flexible resin vs tough resin. Also see our 3D printing resin vs UV resin. Also see our best 3D resin printers. Also see our 8K vs 16K resin printer. Also see our best FEP film.




