Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Abs-like vs Standard Resin: Which One Should You Buy?

ABS-like resin listings claim toughness and impact resistance, with heat resistance on one listing and wide wavelength compatibility on another.

Abs-like vs Standard Resin: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1SUNLU Silk PLA+ Filament 1.75mmSUNLU Silk PLA+ Filament 1.75mm9.7/10View on Amazon
  2. 2Revopoint MINI 2 3D ScannerRevopoint MINI 2 3D Scanner9.6/10View on Amazon
  3. 3Gizmo Dorks 3mmGizmo Dorks 3mm9.6/10View on Amazon
  4. 4ELEGOO 8K ABS-Like 3.0 3D Printer Resin Space Grey 2000gELEGOO 8K ABS-Like 3.0 3D Printer Resin Space Grey 2000gView on Amazon
  5. 5ELEGOO ABS-Like 3.0 3D Printer Resin Grey 1000gELEGOO ABS-Like 3.0 3D Printer Resin Grey 1000gView on Amazon
  6. 6ELEGOO ABS-Like 3.0+ 3D Printer Resin Grey 1000gELEGOO ABS-Like 3.0+ 3D Printer Resin Grey 1000gView on Amazon
  7. 7SUNLU 3000G ABS-Like 3D Printer ResinSUNLU 3000G ABS-Like 3D Printer ResinView on Amazon
  8. 8SUNLU 2000G ABS-Like 3D Printer ResinSUNLU 2000G ABS-Like 3D Printer ResinView on Amazon
  9. 9ANYCUBIC ABS-Like Resin Pro 2ANYCUBIC ABS-Like Resin Pro 2View on Amazon

For functional parts that must survive drilling, tapping and everyday stress, choose ABS-like resin; for display models where toughness matters less, this guide cannot rank standard resin, because no standard resin listing is included. That is the whole of abs-like vs standard resin in one line: the listings in this guide present ABS-like as the tougher, less brittle option, and all four listings sit on that branch.

Other machines to compare

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

All four listings in this guide are ABS-like resins. No standard resin listing is included, so this guide quotes no standard resin specs and instead reports what the ABS-like listings claim against the standard baseline.

Abs-like vs standard resin: the short answer

The ABS-like listings claim high precision with low shrinkage, alongside strength and toughness. No standard resin listing is included, so this guide states no standard resin detail or strength figure. SUNLU states its ABS-like resin has better toughness than other types of resin and is non-brittle, with excellent abrasion resistance. Anycubic states its ABS-Like Resin Pro 2 strengthens toughness beyond the previous ABS-like version and increases elongation at break by more than 100 percent. ELEGOO states its ABS-like resin 3.0 withstands drilling and certain impacts while keeping its shape. If a part will be handled, fitted, drilled or used as a fixture, those claims point to ABS-like. If a part will sit on a shelf and never carry a load, the standard baseline may be enough, but none of the listings here price or spec that baseline, so compare on the ABS-like claims below.

What ABS-like resin adds

Strength comes first in every listing. ELEGOO ABS-like 3.0 is engineered for high strength, impact resistance and toughness, for functional prototypes, mechanical parts and industrial parts. ELEGOO ABS-like 3.0 Plus adds higher heat resistance, keeping its shape and mechanical properties at higher temperatures up to 55 degrees Celsius, which the listing says reduces the risk of failure from heat. Anycubic ABS-Like Resin Pro 2 is aimed at structural parts, industrial prototype parts and fixtures. SUNLU points the same toughness at small work, calling its resin a first choice for miniature or tiny objects that must not snap.

Precision comes second, and the listings agree on the mechanism: lower shrinkage. ELEGOO ABS-like 3.0 states lower volume shrinkage for intricate detail, smooth surfaces and accurate dimensional stability. ELEGOO 3.0 Plus states low shrinkage rates with smooth surfaces and clear details. SUNLU states reduced volume shrinkage during curing for high precision and smooth surfaces. Anycubic states an even lower shrinkage rate than its previous version, with less distortion and sharp, vivid details. None of the listings gives a shrinkage percentage, so treat low shrinkage as a shared claim, not a ranked figure.

Fluidity is the third shared claim, and it matters for print success. ELEGOO ABS-like 3.0 states low viscosity for faster curing, with viscosity 25 to 47 percent lower than ABS-like 1.0 and ABS-like 2.0, so resin flows back into the print area and peels easily from the release film. ELEGOO 3.0 Plus states excellent fluidity that fills and sets the surface quickly and reduces release force. Anycubic states low viscosity and high flowability for shorter curing times and easier model formation, with rapid reflow that minimizes delamination. SUNLU states excellent fluidity for fast curing. Better reflow is linked in these listings to print success, which is why fluidity shows up in every listing.

What standard resin is for

Standard resin is the reference point, not a product in this guide. None of the four listings compares itself against a standard resin listing: SUNLU compares its toughness with other resin types, Anycubic compares its toughness with its previous ABS-like version, and ELEGOO compares viscosity with earlier ABS-like versions. That leaves standard resin unranked here: a display piece, a concept model or a miniature that will be handled gently may not need the extra toughness, but the listings do not state standard resin strength, shrinkage or curing figures, so this guide does not invent them and does not rank standard resin on detail either.

The four ABS-like resins in this guide

Ranked by the strength of their stated claims, the four listings line up as follows. First, Anycubic ABS-Like Resin Pro 2 Bundle, with 4 packs of 1 kg in grey, 4 kg in total. Its headline claim is the largest toughness jump: elongation at break up by more than 100 percent over the previous version, plus low viscosity, high flowability, low odor and compatibility with LCD and DLP printers operating within the 365 to 405nm wavelength range. It also states leak-proof safety packaging. It suits structural parts, industrial prototypes and fixtures.

Second, ELEGOO ABS-Like 3.0 Plus in grey, 2000g. Its distinct claim is heat resistance up to 55 degrees Celsius, alongside high strength, impact resistance, high precision, low shrinkage, excellent fluidity and fast curing. Printed models can be tapped and drilled without cracking, per the listing. It suits parts that will sit in warm rooms or near warm equipment.

Third, ELEGOO ABS-like 3.0 in Space Grey, 2000g. It states high strength and toughness, low volume shrinkage for high precision, low viscosity 25 to 47 percent lower than ABS-like 1.0 and 2.0, good stability with no delamination or separation over time, and compatibility with LCD and DLP printers using 405nm UV light-curing technology. It also states it works best with ELEGOO light-curing printers and suits 12K, 14K and 16K Mars, Saturn and Jupiter machines. It suits functional prototypes, mechanical parts and industrial parts.

Fourth, SUNLU ABS-Like resin in grey, 3000g. It states better toughness than other resin types, non-brittle prints, excellent abrasion resistance, fast curing, low shrinkage, high precision, smooth surfaces and a very light odor. It suits 2K, 4K, 6K and 8K LCD, DLP and SLA printers, and its leak-proof bottle design with a tight-fitting air bag suits shipping and storage. It suits miniature and tiny objects first, and general printing second.

Choosing between them

Start with wavelength. ELEGOO 3.0 and SUNLU state 405nm curing, while Anycubic states a 365 to 405nm range, which covers more machines. ELEGOO 3.0 Plus does not state a wavelength in its bullets, so confirm it against your printer before ordering. Next, match bottle size to print volume: 2000g for the two ELEGOO resins, 3000g for SUNLU, and 4 kg in total across 4 packs for Anycubic. A bundle suits a run of parts, while a single bottle suits trying a resin for the first time. Then weigh heat: only ELEGOO 3.0 Plus states a heat figure, up to 55 degrees Celsius. If heat is not a factor, choose on toughness claims and bottle size instead. These resins are for resin printing with UV curing, not for laser cutting, and nothing here suggests putting a printed part under a laser.

Printing and safety notes

Resin printing has its own workflow, separate from laser work. All four listings stress fluidity and curing behavior, which means print settings, exposure and washing still decide the final part. SUNLU lists a very light odor and Anycubic lists a low-odor formula, but odor claims do not replace ventilation: run the printer where air moves and follow the resin maker guidance for handling. Keep liquid resin off skin, keep bottles sealed, and store them away from light, since these are UV curing materials. The listings state leak-proof packaging for SUNLU and Anycubic, which helps in transport, but safe handling at the bench is still on the maker. For machine choice, see our best entry level resin printer guide and the resin 3D printers hub.

FAQ: lasers and CNC

Is ABS-like resin stronger than standard resin?

No head-to-head figure is stated here, because no standard resin listing is included. SUNLU states better toughness than other resin types, and Anycubic states toughness beyond its previous ABS-like version, with elongation at break up by more than 100 percent.

Can ABS-like resin be drilled and tapped?

ELEGOO states its ABS-like 3.0 withstands drilling and certain impacts, and ELEGOO 3.0 Plus states printed models can be tapped and drilled without cracking.

Which resin suits functional parts?

ABS-like resin. ELEGOO lists functional prototypes, mechanical parts and industrial parts, and Anycubic lists structural parts, industrial prototype parts and fixtures.

Does ABS-like resin handle heat?

ELEGOO 3.0 Plus states models keep their shape and mechanical properties at higher temperatures up to 55 degrees Celsius. The other three listings state no heat figure.

What light wavelength do these resins use?

ELEGOO 3.0 and SUNLU state 405nm curing, and Anycubic states a 365 to 405nm range for LCD and DLP printers. ELEGOO 3.0 Plus states no wavelength in its bullets.

Can I print miniatures with ABS-like resin?

Yes. SUNLU calls its resin a first choice for miniature or tiny objects, and all four listings state high precision with low shrinkage. See also resin vs PLA for miniatures.

Related: the 3D printers hub, FDM vs resin 3D printer and 3D printing resin vs UV resin.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.