Flexible Resin vs Tough Resin: Which One Should You Buy?
Two SUNLU flexible resins and two ANYCUBIC tough resins compared on hardness, stretch, wavelength and use, so you can match the resin to the part.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ANYCUBIC Tough Resin 2.09.6/10View on Amazon - 2
ANYCUBIC Ultra Tough Resin9.6/10View on Amazon - 3
SUNLU Flexible 3D Printer Resin 2KG9.5/10View on Amazon - 4
SUNLU Flexible 3D Printer Resin9.5/10View on Amazon
You have a part in mind that has to bend, or a part that has to survive being dropped. That is the whole choice in flexible resin vs tough resin: one side bends, the other side is built to survive handling and drops. This comparison puts two SUNLU flexible resins against two ANYCUBIC tough resins, using what each listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: pick flexible resin when the part must bend, and pick tough resin when the part must survive handling and drops. The SUNLU flexible resins state a 70A hardness with 135% elongation at break, while the ANYCUBIC tough resins state no hardness figure: the Tough Resin 2.0 claims upgraded flexural strength and the Ultra Tough claims strong impact resistance.
Machines on the list
| # | Product | HQ Score | Buy |
|---|---|---|---|
| 1 | ANYCUBIC Tough Resin 2.0 | 9.6/10 | Buy on Amazon |
| 2 | ANYCUBIC Ultra Tough Resin | 9.6/10 | Buy on Amazon |
| 3 | SUNLU Flexible 3D Printer Resin 2KG | 9.5/10 | Buy on Amazon |
| 4 | SUNLU Flexible 3D Printer Resin | 9.5/10 | Buy on Amazon |

ANYCUBIC Tough Resin 2.0
A tough resin with upgraded flexural strength for miniature components and thin models.
Pros
- Upgraded flexural strength and strong elongation for thin models
- High precision with low shrinkage and a smooth surface
- Low odor, non-irritating composition
- Built for most LCD resin printers at 365-405nm, including 4K and 8K
Cons
- No Shore hardness figure is stated
- No warranty term is stated
- Grey only in this listing

ANYCUBIC Ultra Tough Resin
An ultra tough resin with strong impact resistance for articulated models, wearable models, and use as an additive.
Pros
- Strong impact resistance with quick recovery of shape
- Works direct or as an additive to raise the toughness of other resins
- Suited to articulated models and wearable models such as earphone covers
- Resists brittleness, softening and corrosion in high humidity
Cons
- No UV wavelength is stated
- No Shore hardness or elongation figure is stated
- No warranty term is stated
- Black only in this listing

SUNLU Flexible 3D Printer Resin 2KG
A 70A flexible resin in a 2000G bottle for soft, bendable prints with 135% elongation at break.
Pros
- 70A Shore durometer with 135% elongation at break for bendable parts
- Low shrinkage for accurate size and shape
- Minimal odor that the listing calls not pungent and not irritating
- Compatible with 99% of printers, including LCD, DLP and SLA
Cons
- One bullet heading says 66A while the title and bullet text say 70A
- No warranty term is stated
- Gray only in this listing
- Bends by design, so rigid parts belong with the Tough Resin 2.0

SUNLU Flexible 3D Printer Resin
The same 70A flexible resin in a 1000G bottle for soft, bendable prints.
Pros
- 70A Shore durometer with 135% elongation at break for bendable parts
- Low shrinkage for accurate size and shape
- Minimal odor that the listing calls not pungent and not irritating
- Compatible with 99% of printers, including LCD, DLP and SLA
Cons
- One bullet heading says 66A while the title and bullet text say 70A
- No warranty term is stated
- Gray only in this listing
- Bends by design, so rigid parts belong with the Tough Resin 2.0
Other machines to compare
Siraya Tech Tenacious Flexible 3D Printer ResinCheck price on Amazon
Siraya Tech Tenacious Highly Flexible 3D Printer ResinCheck price on Amazon
SUNLU High Toughness 3D Printer ResinCheck price on Amazon
Inslogic Flexible 70A 3D Printer ResinCheck price on Amazon
ANYCUBIC Ultra Tough ResinCheck price on Amazon
YOUSU Flexible ToughCheck price on Amazon
Side by side
| Spec | ANYCUBIC Tough 2.0 | ANYCUBIC Ultra Tough | SUNLU Flexible 2KG | SUNLU Flexible 1KG |
|---|---|---|---|---|
| HQ Score | 66 | 65 | 63 | 62 |
| Stated hardness | Not stated | Not stated | 70A Shore durometer | 70A Shore durometer |
| Elongation at break | Not stated | Not stated | 135% | 135% |
| UV wavelength | 365-405nm | Not stated | 365-405nm | 365-405nm |
| Size | 1kg | 1kg | 2000G | 1000G |
| Color | Grey | Black | Gray | Gray |
| Odor | Low odor | Not stated | Minimal odor | Minimal odor |
| Warranty | Not stated | Not stated | Not stated | Not stated |
| Use | Miniature components, thin models | Articulated and wearable models | Soft and flexible items | Soft and flexible items |
Specs are what each manufacturer publishes as its rating on the listing, collected 5 November 2026.
Flexible resin vs tough resin: the core difference
Flexible resin bends. The SUNLU listings describe a resin that simulates rubber, made for soft and flexible items that bend and do not turn brittle. Tough resin is built to survive handling. The ANYCUBIC Tough Resin 2.0 is built for models, shells and parts with rigid requirements, and the Ultra Tough is built for articulated and wearable models that flex and recover their shape. Both claim to resist breakage.
A soft and flexible item or a rubber-like prototype wants the flexible side. A miniature component, a thin model or a shell with rigid requirements wants the Tough Resin 2.0, and an articulated or wearable model wants the Ultra Tough.
Hardness and stretch
The SUNLU flexible resins state their numbers plainly: 70A Shore durometer and 135% elongation at break, the same on both listings. The ANYCUBIC tough resins state no Shore hardness and no elongation figure, so the two sides cannot be ranked on stiffness from the listings: the Tough Resin 2.0 claims upgraded flexural strength, and the Ultra Tough claims strong impact resistance with quick recovery of shape. Flexural strength and impact resistance describe toughness, not stiffness.
One listing slip to note: a SUNLU bullet heading says 66A Shore Hardness while the title and the bullet text say 70A. Read the hardness as 70A, the figure the title and the text agree on.
UV wavelength and compatibility
Three of the four resins state a 365-405nm wavelength: both SUNLU flexible resins and the ANYCUBIC Tough Resin 2.0. SUNLU claims compatibility with 99% of printers, including LCD, DLP and SLA, and the Tough Resin 2.0 is built for most LCD resin printers, including 4K and 8K machines. The Ultra Tough listing states no wavelength, only wide compatibility with LCD resin printers.
Odor and handling
SUNLU calls its flexible resin minimal odor, with an aromatic odor that is not pungent and not irritating. ANYCUBIC calls the Tough Resin 2.0 low odor with a non-irritating composition that reduces volatile organic compounds. The Ultra Tough listing says nothing about odor, only that it feels non-irritating on the skin once set. None of the listings state a warranty term.
Sizes and colors
The SUNLU flexible resin comes in a 2000G gray bottle and a 1000G gray bottle, with the same 70A hardness and 135% elongation on both. The ANYCUBIC tough resins both come as 1kg bottles: the Tough Resin 2.0 in grey and the Ultra Tough in black.
Choose flexible resin if
- Your part must bend, flex or feel rubber-like.
- You print soft and flexible items or rubber-like prototypes.
- You want the stated 70A hardness and 135% elongation.
Choose tough resin if
- Your part must survive drops and handling without breaking.
- You print miniature components, thin models, shells, or articulated and wearable models.
- You want a resin that can also work as an additive.
Project Match
- Soft and flexible items and rubber-like prototypes: SUNLU Flexible 2KG or SUNLU Flexible 1KG, both 70A.
- Miniature components and thin models: ANYCUBIC Tough Resin 2.0.
- Articulated models and wearable parts such as earphone covers: ANYCUBIC Ultra Tough Resin.
- A tougher blend with a resin you already own: ANYCUBIC Ultra Tough Resin, used as an additive.
- Print settings such as layer height or exposure time: Not stated in any listing.
FAQ: lasers and CNC
Which is better for flexible parts, flexible resin or tough resin?
Flexible resin. The SUNLU flexible resins are made for soft and flexible items that bend, with a stated 70A hardness and 135% elongation at break. The tough resins in this comparison are made for parts that must survive handling: the Tough Resin 2.0 is built for rigid requirements, and the Ultra Tough is built for articulated and wearable parts.
Can tough resin bend?
The two tough resins differ. The Tough Resin 2.0 claims strong elongation and high flexibility, but it is built for models, shells and parts with rigid requirements. The Ultra Tough claims superb flexibility and recovers its shape after deformation, and it is built for articulated and wearable models. Neither listing states a Shore hardness figure, so neither can be ranked against the 70A flexible resin on stiffness.
What wavelength do these resins need?
The SUNLU flexible resins and the Tough Resin 2.0 state 365-405nm. The Ultra Tough listing states no wavelength, so check the maker guidance for your printer.
Do these resins smell?
SUNLU calls its flexible resin minimal odor and not pungent, and ANYCUBIC calls the Tough Resin 2.0 low odor. The Ultra Tough listing makes no odor claim.
Can I mix Ultra Tough resin with another resin?
Yes. The listing says it works as an additive: blended with other resins it raises their toughness and durability. Mixing the same color has no effect on the final color.
Related: ABS-like vs standard resin, water washable vs standard resin and resin vacuum chamber vs pressure pot.




