Who Makes the Best Forstner Bits: Brands and Sets to Buy
Diablo, Meichoon, Vearter and other makers build Forstner bit sets in carbide, high-speed steel and alloy steel, so the right maker depends on the sizes, shank and material the work needs.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
CORTOOL Forstner Bit Set 16Pcs Hex Shank9.6/10View on Amazon - 2
COMOWARE Forstner Bit Set 16 PCS for Woodworking9.6/10View on Amazon - 3
Devvicoo Forstner Bit Set9.5/10View on Amazon
Who makes the best forstner bits depends on the work in front of you: a hinge bore in a cabinet door, a flat-bottomed hole for a dowel joint, or a wide bore for a cable pass-through. No maker wins every job, because the listings split by material, size range and shank, and the right set is the set whose sizes and material match the holes you drill most. The sections below compare the makers the listings name, so you can pick by stated facts rather than by brand habit.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Who makes the best Forstner bits
Diablo is the established professional name among the listings. Its 7-piece high-speed steel set covers sizes from 1/4 inch to 1 inch, with a 3-1/2 inch length, and the maker describes the bits as a choice for woodworking professionals and DIY enthusiasts alike. The set fits drill chucks 3/8 inch and larger, and it carries the Freud limited tooling warranty.
The wide-range value sets come from Meichoon, HPHOPE, HURESON, Vearter and XDENGP, each listing a 16-piece set. Meichoon and HURESON list metric sizes from 15 mm to 35 mm. HPHOPE and Vearter list inch sizes from 1/4 inch to 2-1/8 inches. XDENGP lists sizes from 1/2 inch to 3 inches. Kendo and BeHappy list 8-piece sets from 1/4 inch to 1-3/8 inches, XIANFENGHU lists a 5-piece set from 5/8 inch to 1-3/8 inches, and ASNOMY lists a 6-piece set from 1-3/8 inches to 2-3/4 inches for large bores.
That split is the whole answer in short: pick Diablo when the job calls for a named professional brand with a stated warranty, and pick a 16-piece set when the job calls for range across small and large bores. The rest of the choice comes down to material, shank and size, covered below.
Start with the bit material
Forstner bits in these listings come in carbide, high-speed steel, alloy steel and high carbon steel versions, and the material decides how the bit holds an edge in hard wood. Carbide appears in the ASNOMY, XDENGP and XIANFENGHU listings: ASNOMY and XIANFENGHU list tungsten carbide tipped cutters, XDENGP lists carbide inserts, and ASNOMY lists a hardened steel body. Meichoon and HURESON list tungsten steel, hot-treated for hardness and toughness. Diablo lists high-speed steel with a forged hardened steel body, and HPHOPE lists high speed carbon steel. Kendo and BeHappy list heat-treated alloy steel, and Vearter lists high carbon steel.
Carbide suits hard wood and long runs of holes, while high-speed steel and alloy steel suit general woodworking across soft wood, hard wood, plywood and plastic. The listings agree on the work: soft wood, hard wood, plywood, plastic, MDF and particleboard come up across the sets, and XDENGP also lists acrylic and compact panels. No listing here claims a Forstner bit cuts metal, and XDENGP states plainly not to cut metal. For a closer look at how these materials compare, see the drill bit material types guide.
Match the size range to the work
Hinge bores are the most common Forstner job, and the hinge size in these listings is 1-3/8 inches, covered by the Kendo, BeHappy, Vearter, ASNOMY and XIANFENGHU sets. If the work is mostly cabinet hinges, a set that includes 1-3/8 inches covers the job, and the cabinet hinge size guide walks through the fit.
Small holes start at 1/4 inch in the Diablo, HPHOPE, Vearter, Kendo and BeHappy sets, which suits dowel joints, small plugs and hardware holes. Large bores run to 2-1/8 inches in the HPHOPE and Vearter sets, to 2-3/4 inches in the ASNOMY set, and to 3 inches in the XDENGP set. Metric sets from Meichoon and HURESON run from 15 mm to 35 mm. Pick the set whose largest size covers the widest hole on the project list, and whose smallest size covers the narrowest.
Check the shank and the machine
Shank type decides whether the bit grips in the chuck. HPHOPE lists a round shank, while Vearter lists a 3/8 inch hex shank on every bit, ASNOMY lists a 3/8 inch hex shank, XIANFENGHU lists a hex shank, and BeHappy lists a hex shank that resists slipping. Hex shanks grip tighter in a drill chuck and suit hand drills, while round shanks suit drill presses and drivers with a standard chuck. The drill bit shank types guide covers the fit in more detail.
Large bits need a steady machine. ASNOMY advises a drill press, bench drill or vertical drill for large-size bits, and a high-power hand drill with a vise when a hand drill is the only option. XDENGP lists a 16000 RPM limit and advises pushing slowly for a smoother cut. Diablo bits fit drill chucks 3/8 inch and larger. For the full setup routine, see how to use a Forstner drill bit.
Set size and what comes in the box
Set size runs from a 5-piece set to a 16-piece set in these listings. XIANFENGHU lists 5 pieces, ASNOMY lists 6 pieces, Diablo lists 7 pieces, Kendo and BeHappy list 8 pieces, and Meichoon, HPHOPE, HURESON, XDENGP and Vearter list 16 pieces. A 16-piece set covers the widest spread of sizes in a single box, while a 5-piece or 6-piece set covers a narrow band for a defined job, such as hinge bores or large bores.
Storage cases come with the HPHOPE and Kendo sets, which keeps the bits sorted and the cutting edges apart. Diablo lists the Freud limited tooling warranty, and Kendo and BeHappy list a 30-day money-back guarantee. The remaining listings state no warranty term.
Common mistakes to avoid
- Buying a set whose largest size stops short of the widest hole on the project list.
- Using a round shank bit in a chuck that slips under load, when a hex shank set is listed for the same sizes.
- Running a large bit in a hand drill without a vise or a steady rest, when the maker advises a drill press.
- Cutting metal with a Forstner bit, which XDENGP states not to do.
- Ordering by brand name alone without checking the size range in the listing.
The short version
- Diablo for a named professional brand with a stated warranty.
- A 16-piece set from Meichoon, HPHOPE, HURESON, Vearter or XDENGP for range across small and large bores.
- A 1-3/8 inch size in the set for cabinet hinges.
- Carbide for hard wood, high-speed steel or alloy steel for general work.
- Hex shank for grip in a hand drill, round shank for a drill press.
- Check the size range and shank in the listing before ordering.
FAQ: lasers and CNC
What size Forstner bit suits cabinet hinges?
A 1-3/8 inch bit is the hinge size in these listings, covered by the Kendo, BeHappy, Vearter, ASNOMY and XIANFENGHU sets. Check the hinge cup size against the bit size before ordering, and see the cabinet hinge size guide for the fit.
Can a Forstner bit run in a hand drill?
Yes, with care. Small bits run fine in a hand drill, while large bits need a steady machine, and ASNOMY advises a drill press for large-size bits. A hex shank set grips better in a hand drill chuck, and a vise holds the work steady.
What is the difference between carbide and high-speed steel Forstner bits?
Carbide-tipped bits, listed by ASNOMY, XDENGP and XIANFENGHU, hold an edge in hard wood. High-speed steel bits, listed by Diablo, suit general woodworking. Alloy steel and high carbon steel sets from Kendo, BeHappy and Vearter cover the same general work.
Do Forstner bits work on a drill press and a CNC router?
The listings suit drill presses, bench drills and hand drills, and XDENGP also lists CNC carving machines among the machines its bits suit. Check the shank size against the chuck before ordering.
How to keep a Forstner bit from wandering?
Some bits in these listings use a center point or a spur tip to guide the cut. HPHOPE lists a center point design for precise positioning without slipping, and Diablo lists an ultra-sharp spur tip that prevents walking. Clamp the work, start slow, and let the bit seat before pushing through.
What materials can Forstner bits drill?
The listings cover soft wood, hard wood, plywood, plastic, MDF and particleboard, and XDENGP also lists acrylic and compact panels. Do not cut metal: XDENGP states not to cut metal such as steel or iron.
Related: the CNC tooling hub, how to use a Forstner drill bit and types of drill bits. Also see the drill bit sharpener guide.




