Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

M4 Heat Set Insert Hole Size Chart

The M4 heat set insert hole size is 5mm, matched to the outside diameter of the M4 insert, with a full size chart and the kits that set it.

M4 Heat Set Insert Hole Size Chart
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1KADRICK 80W Soldering Iron Heat Insert ToolKADRICK 80W Soldering Iron Heat Insert Tool9.6/10View on Amazon
  2. 23DZWMAN Heat Set Insert Tool with 370PCS Threaded3DZWMAN Heat Set Insert Tool with 370PCS Threaded9.6/10View on Amazon
  3. 3Preciva Heat Set Insert ToolPreciva Heat Set Insert Tool9.5/10View on Amazon
  4. 4Ktehloy 513Pcs SAE Threaded InsertsKtehloy 513Pcs SAE Threaded Inserts9.4/10View on Amazon

A printed bracket comes off the bed looking right, and then the bolt has nothing to bite into. A plain printed hole can strip the first time a bolt goes in, and the part is scrap. M4 heat set insert hole size is the measurement that fixes it: match the hole to the outside diameter stated for the M4 insert, and the heated insert presses into place as the plastic melts around it and holds a real thread. The sections below give the size, the chart for the other sizes, and the kits that set the insert.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

KADRICK 80W Soldering Iron Heat Insert Tool

KADRICK 80W Soldering Iron Heat Insert Tool

Kadrick9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 80W soldering iron heat set insert tool with 7 brass tips and 520 lead-free brass inserts, for PLA, ABS and nylon.

Pros

  • 80W digital iron with rapid heating in 30 seconds or less
  • 520 lead-free brass inserts with 7 brass tips
  • Tips cover M2, M2.5, M3, M4, M5, M6 and M8
  • 12-month tool warranty from the maker

Cons

  • No press stand, so the iron is held by hand
  • No stated iron temperature range
  • No M4 outside diameter is stated
  • No holder or stand is stated in the box
3DZWMAN Heat Set Insert Tool with 370PCS Threaded

3DZWMAN Heat Set Insert Tool with 370PCS Threaded

3DZWMAN9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A press-style heat set insert tool with a digital soldering iron and 370 threaded inserts, including 50 M4 inserts at D5.

Pros

  • Press stand with a 2040 aluminum profile for 90° vertical insertion
  • 370 inserts, including 50 M4 inserts at D5
  • Digital iron, 180-500°C, with 110V/220V automatic conversion
  • Tips cover M2, M2.5, M3, M4, M5, M6, 1/4 and M8

Cons

  • No warranty term is stated
  • Tips match ceramic tube D4xL24 irons
  • No bolts or nuts are included
  • No cord length is stated
Preciva Heat Set Insert Tool

Preciva Heat Set Insert Tool

Preciva9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An M4 heat set insert kit with a 60W digital soldering iron, 2 M4 tips, 95 inserts, 95 bolts and 95 nuts.

Pros

  • M4-focused kit with 2 M4 insert tips
  • 60W digital iron, 200-500°C
  • 95 inserts plus 95 bolts and 95 nuts in the box
  • Tweezers and a holder for safer operation

Cons

  • No warranty term is stated
  • M4 only, with no other insert sizes
  • No stated M4 outside diameter
  • No stated cord length
Ktehloy 513Pcs SAE Threaded Inserts

Ktehloy 513Pcs SAE Threaded Inserts

Ktehloy9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 513-piece SAE threaded insert kit with 506 brass inserts and 7 heat set insert tips, for plastic and 3D printing components.

Pros

  • 506 inserts across 6 SAE sizes
  • Brass inserts withstand temperatures over 300°C
  • 45-degree knurling for torque and tensile strength
  • Works with a common soldering iron, no special iron needed

Cons

  • SAE sizes only, with no M4 insert
  • No soldering iron is included
  • No warranty term is stated
  • No hole sizes are stated for the inserts

M4 Heat Set Insert Hole Size: 5mm

The M4 insert in the 3DZWMAN kit is listed as M4xL4xD5: an M4 thread, 4mm long, with a 5mm outside diameter. For this insert, the hole matches the outside diameter, so the M4 heat set insert hole size is 5mm. Print or drill the hole at 5mm for this insert, heat the insert with the iron, and press it straight in. Other M4 inserts can state a different outside diameter, so match the hole to the diameter stated for the insert you use.

Insert Length Outside diameter Hole size
M2 3mm 3.2mm 3.2mm
M2.5 4mm 4mm 4mm
M3 4mm 4.2mm 4.2mm
M4 4mm 5mm 5mm
M5 5mm 7mm 7mm
M6 6mm 8mm 8mm
1/4-20 6mm 8mm 8mm
M8 8mm 10mm 10mm

The sizes above come from the 3DZWMAN kit, which lists each insert with its length and outside diameter. For the inserts in this kit, the hole matches the stated outside diameter: a D5 insert takes a 5mm hole, and a D4.2 insert takes a 4.2mm hole. The Kadrick and Preciva kits do not state an outside diameter for their M4 inserts, so check the diameter stated for the insert you use.

How to Set an M4 Insert

  1. Make the hole to match the insert. Print or drill the hole to the outside diameter of the M4 insert you use; the 3DZWMAN M4 insert (on Amazon) is D5, so its hole is 5mm.
  2. Heat the iron. The 3DZWMAN iron runs 180-500°C and the Preciva iron runs 200-500°C; let the iron reach temperature before pressing the insert in.
  3. Fit the M4 tip. Thread the M4 tip onto the iron and pick up the insert on the tip.
  4. Press straight down. Push the insert into the hole at 90° and hold it vertical until the plastic melts around it.
  5. Let it cool. Hold the insert still while the plastic sets, then back the tip out and leave the part to cool.

The Gear for M4 Heat Set Insert Hole Size

The kits below cover the job between them: the irons heat the insert, the tips carry it, the 3DZWMAN press stand keeps it straight at 90°, and the Ktehloy kit (on Amazon) supplies inserts and tips for a common soldering iron.

Match the Insert to the Hole

Match the insert to the hole by the outside diameter stated for the insert you use, not the thread size: in the 3DZWMAN kit, an M4 thread sits in a 5mm hole, an M3 thread in a 4.2mm hole, and an M5 thread in a 7mm hole. The Kadrick kit covers M2 to M8 with 7 tips, the 3DZWMAN kit covers M2 to M8 with a press stand, and the Preciva kit covers M4 only. The Ktehloy kit covers SAE sizes from #2-56 to 1/4″-20, with no metric insert, so it does not cover M4.

Safety

A heat set iron runs hot enough to burn skin and melt plastic, so hold it by the grip, set it down safely between inserts, and keep fingers clear of the tip. Work with ventilation and keep flammable materials away from the iron.

FAQ: lasers and CNC

What size hole do I drill for an M4 heat set insert?

5mm for the M4 insert in the 3DZWMAN kit. That insert is listed as M4xL4xD5, with a 5mm outside diameter, and the hole matches the outside diameter. Check the diameter stated for the insert you use, since other M4 inserts can differ.

Can I use the same hole size for M3 and M4 inserts?

No. In the 3DZWMAN kit, the M3 insert is D4.2, so it takes a 4.2mm hole, while the M4 insert is D5 and takes a 5mm hole.

What temperature should the iron be for heat set inserts?

No setting temperature is stated in these listings. The 3DZWMAN iron runs 180-500°C and the Preciva iron runs 200-500°C, so let the iron reach temperature before pressing the insert in. The Ktehloy listing states only that its inserts withstand temperatures over 300°C.

Do I need a special tool to install heat set inserts?

A kit helps: the 3DZWMAN kit adds a press stand for 90° vertical insertion, and the Kadrick and Preciva kits add irons and tips. The Ktehloy listing says a common soldering iron places the inserts into the holes.

Are SAE inserts the same as metric inserts?

No. The Ktehloy kit lists SAE sizes from #2-56 to 1/4″-20, with no metric insert. Metric kits list M2, M2.5, M3, M4, M5, M6 and M8.

Related: 3D printers, how long to dry filament, best 3D printing filament and how to change 3D printer filament.

More buying guides

3D Printers ·

M3 Heat Set Insert Hole Size Guide

The hole for an M3 heat set insert follows the insert and the tip that seats it, and this guide shows what the listings…

CNC Tooling ·

M5 Heat Set Insert Hole Size Chart

The hole for an M5 heat set insert matches the insert, so this guide shows the temperatures, press times and kits that seat M5…

CNC Tooling ·

How to Use Heat Set Inserts

How to use heat set inserts: pick the right size, heat the tip, press the insert straight into the printed hole, and let the…