What Is the Best 3D Printing Filament: Types Compared
PLA leads as the best 3D printing filament for most makers, with PLA+ for stronger parts and a crystal-clear PETG spool in one bundle, all at 1.75mm.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
PLA+3D Printer Filament 1.75mm Bundle9.7/10View on Amazon - 2
ANYCUBIC 3D Printer Filament PLA Bundle 2KG9.6/10View on Amazon - 3
SUNLU PLA 3D Printer Filament, Black, 1KG9.6/10View on Amazon - 4
ELEGOO PLA 3D Printer Filament 1.75mm Black 1KG9.6/10View on Amazon
What is the best 3D printing filament comes down to the material, the machine and the project. For most makers starting out, PLA is the answer: it prints on most FDM machines and comes in many colors. The guide below compares PLA and PLA+ by what each listing states, then shows the filament bundles that fit the answer.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
We do not have the filament in hand, so this guide compares what each listing states. Treat every figure below as the maker’s claim, and check the listing before you buy.

PLA+3D Printer Filament 1.75mm Bundle
A 16-pack bundle of 1.75mm PLA+ at +/- 0.02mm accuracy, 4KG total, with a crystal-clear PETG spool in the 16-pack.
Pros
- 16 spools, 4KG total, in multiple colors
- 1.75mm PLA+ at +/- 0.02mm accuracy
- 300mm/s high-speed printing stated
- PETG spool included, only in the 16-pack
Cons
- Not compatible with AMS/MMU automatic material systems
- 250g spools, smaller than the 1KG spools here
- PETG spool only in the 16-pack
- No warranty term is stated

ANYCUBIC 3D Printer Filament PLA Bundle 2KG
A 2KG bundle of black PLA at 1.75mm with +/- 0.02mm accuracy, on reusable spools with ID chips for the ACE Pro.
Pros
- 1.75mm PLA at +/- 0.02mm accuracy
- 2KG bundle on reusable spools
- ID chips for automatic identification with the ACE Pro
- Clog-free design, dried 24 hours and vacuum sealed with desiccants
Cons
- ID chips work only with the ACE Pro
- Black only in this bundle
- 2KG bundle, smaller than the 4KG KALIDORA bundle
- No PETG spool in this bundle

SUNLU PLA 3D Printer Filament, Black, 1KG
A single black 1kg PLA spool with stated nozzle and bed temperatures and a neatly wound 100% neat rate.
Pros
- 1.75mm diameter with +/- 0.02mm accuracy
- Stated nozzle range of 200-230°C and bed range of 50-65°C
- Neat winding with a 100% neat rate to reduce tangles and jams
- Spool dimensions stated at 8.00 inches diameter and 2.50 inches wide
Cons
- Black only, no color choice
- No vacuum-sealed packaging stated
- No warranty term is stated
- Single spool only, no bundle option

ELEGOO PLA 3D Printer Filament 1.75mm Black 1KG
A black 1 kg PLA spool at 1.75 mm and +/- 0.02 mm accuracy, dried before packaging and vacuum sealed, for most FDM printers.
Pros
- +/- 0.02 mm accuracy at 1.75 mm
- Low warp and shrinkage, with strong layer adhesion
- Neatly wound to prevent tangles and feeding issues
- Dried before packaging and vacuum sealed against moisture
Cons
- One color only: black
- No nozzle or bed temperature stated
- No print speed stated
- No warranty term stated
What is the best 3D printing filament: the short answer
PLA is the filament the listings here are built on: every bundle in this guide is built on PLA or PLA+, at 1.75mm diameter with +/- 0.02mm accuracy. PLA+ is the stronger form, and the KALIDORA bundle (on Amazon) pairs it with a crystal-clear PETG spool. The PETG needs a hotter bed, 60-65°C against 50-55°C for the PLA+, so the material you pick changes the settings, not just the color. For a maker starting out, PLA is the starting point, and PLA+ is the step up when parts need more strength.
How to read a filament listing
Start with the diameter and the accuracy: every listing here states 1.75mm with +/- 0.02mm accuracy. Then read the spool size and the bundle: the ANYCUBIC bundle (on Amazon) is 2KG, the KALIDORA bundle is 4KG in 16 spools of 0.25kg, and the SUNLU and ELEGOO listings are single 1KG spools. Drying and packing matter as much as the plastic: the ANYCUBIC filament is dried for 24 hours and vacuum sealed with desiccants, and every KALIDORA spool is individually vacuum-sealed with fresh desiccant. Bed temp and speed are the last figures to check: the KALIDORA maker gives 50-55°C for PLA+ and 60-65°C for PETG, with 300mm/s high-speed printing.
The filament bundles in this guide
These bundles cover the answer above: PLA for everyday prints, PLA+ for stronger parts, and a crystal-clear PETG spool in one bundle, all at 1.75mm.
Drying, storage and first prints
Filament prints best dry, and the listings here say so in their packing: the ANYCUBIC filament is dried for 24 hours before packaging and vacuum sealed with desiccants, and every KALIDORA spool arrives individually vacuum-sealed with fresh desiccant, ready to print. Keep spools sealed with desiccant between prints, and check the bed temp for the material before the print starts: 50-55°C for the PLA+ and 60-65°C for the PETG in the KALIDORA bundle. The ANYCUBIC spools are reusable, so a spool that feeds well is worth keeping for the next roll. See our does PLA filament need to be dried guide for more on drying.
FAQ: lasers and CNC
What is the best 3D printing filament for beginners?
PLA, at 1.75mm with +/- 0.02mm accuracy. The KALIDORA bundle says its spools are perfect for beginners and starters, with each spool individually vacuum-sealed and ready to print. Start with PLA, then move to PLA+ when parts need more strength.
What is the difference between PLA and PLA+?
PLA+ is the high-strength form of PLA, and the KALIDORA bundle is the PLA+ listing here. It comes in 0.25kg spools in a 16-pack bundle, 4KG total, with a bed temp of 50-55°C. PLA is the standard form, and every other bundle here is PLA.
What does 1.75mm mean on a filament spool?
It is the diameter of the filament, and every listing here states 1.75mm. A spool that states a different diameter fits a different machine, so match the diameter to the printer before you buy.
Do I need a PETG spool too?
The KALIDORA bundle includes a crystal-clear PETG spool, and it comes only in the 16-pack. The PETG needs a bed temp of 60-65°C, hotter than the 50-55°C for the PLA+ in the same bundle. The other bundles here are PLA or PLA+ only.
What accuracy should a filament listing state?
Every listing here states +/- 0.02mm, at 1.75mm diameter. That figure is the maker’s tolerance for the filament diameter.
Related: the 3D printers hub, best FDM 3D printing filament and how to change 3D printer filament.




