Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

M3 Heat Set Insert Hole Size Guide

The hole for an M3 heat set insert follows the insert and the tip that seats it, and this guide shows what the listings state about sizes, tips and heat.

M3 Heat Set Insert Hole Size Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Vertical Heat Set Insert Tool Press for PlasticVertical Heat Set Insert Tool Press for Plastic9.6/10View on Amazon
  2. 2Ktehloy 361Pcs M3 Heat Set Insert with ScrewsKtehloy 361Pcs M3 Heat Set Insert with Screws9.5/10View on Amazon
  3. 3Heat Set Insert Tools kit with 60W Soldering IronHeat Set Insert Tools kit with 60W Soldering Iron9.5/10View on Amazon
  4. 4FFVRVSS 320+6Pcs Brass Threaded Inserts M2 M2.5 M3FFVRVSS 320+6Pcs Brass Threaded Inserts M2 M2.5 M39.5/10View on Amazon

A printed bracket with a stripped screw hole still has life in it when a metal thread can be set into the plastic, and that small repair is the whole job here. The m3 heat set insert hole size question has no single published answer in the listings compared below: the hole follows the insert and the tip that seats it, while the kits state insert sizes, tip sizes and the heat each plastic needs. Read the insert and tip sizes first, then match the hole to them.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Vertical Heat Set Insert Tool Press for Plastic

Vertical Heat Set Insert Tool Press for Plastic

3DZWMAN9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A vertical insert press with a 60W soldering iron, 380 threaded inserts and quick-change M2-M8 tips for parts up to 210mm tall.

Pros

  • 60W soldering iron with a 180-500°C range and Celsius and Fahrenheit switching
  • Seats inserts in models up to 210mm tall
  • Quick-change tips cover M2, M2.5, M3, M4, M5, M6 and M8
  • 380 threaded inserts included in box packaging

Cons

  • The vertical press frame needs bench space
  • The 180-500°C range runs far above the PLA range of 180-220°C
  • The tip set spans M2 to M8, which suits mixed-size work more than M3-only jobs
  • Insertion height caps at 210mm, so taller parts do not fit the press
Ktehloy 361Pcs M3 Heat Set Insert with Screws

Ktehloy 361Pcs M3 Heat Set Insert with Screws

Ktehloy9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An M3-only kit with 361 brass inserts, heat set tips and hex socket head cap bolts for 3D printed parts and plastic components.

Pros

  • 361 M3 threaded inserts with heat set tips and hex socket head cap bolts
  • 45-degree angled knurling adds torque resistance and tensile strength
  • Brass inserts withstand temperatures exceeding 300°C / 572°F
  • Guiding elements remove the need for countersinking or recessing

Cons

  • No warranty term is stated
  • M3 only, so other insert sizes need a separate kit
  • No soldering iron is included
  • The 5.91 x 4.17 x 0.62 in case holds one size only
Heat Set Insert Tools kit with 60W Soldering Iron

Heat Set Insert Tools kit with 60W Soldering Iron

3DZWMAN9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60W digital soldering iron kit with 380 threaded inserts, quick-change M2-M8 tips and stated temperatures for PLA, PETG, ABS and nylon.

Pros

  • 60W digital soldering iron with automatic voltage conversion of 110V/220V
  • Temperature range of 180°C (356°F) to 500°C (932°F) with continuous adjustment
  • Stated material temperatures for PLA, PETG, ABS and Nylon/PC
  • 380 threaded inserts with quick-change M2-M8 tips and a silicone protective cover

Cons

  • The kit spans M2 to M8, which suits mixed-size work more than M3-only jobs
  • The 180-500°C iron needs care on PLA, which the maker rates at 180-220°C
  • The iron runs on 110V/220V
  • No drill bit is included, so the hole still needs a bit that matches the insert
FFVRVSS 320+6Pcs Brass Threaded Inserts M2 M2.5 M3

FFVRVSS 320+6Pcs Brass Threaded Inserts M2 M2.5 M3

FFVRVSS9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 320-piece lead-free brass insert kit in M2 to M5 with 5 heat set tips, an iron adapter and a labeled case.

Pros

  • 320 lead-free brass inserts across M2, M2.5, M3, M4 and M5
  • 5 heat set tips and 1 soldering iron adapter included
  • Lead-free brass withstands above 300°C/572°F
  • 45-degree spiral knurling adds torque resistance and pull-out strength

Cons

  • No warranty term is stated
  • The soldering iron is not included
  • M2 to M5 only, so M6 and M8 sizes need another kit
  • No drill bit is included, so the hole still needs a bit that matches the insert

M3 Heat Set Insert Hole Size: What the Listings State

None of the four listings publishes a hole diameter for M3 inserts, so the size comes from the insert itself rather than from a chart. Each kit states the insert sizes it carries and the tips that seat them. The M3-only kit carries 361 M3 inserts with heat set tips and hex socket head cap bolts, while the mixed kits carry 320, 380 and 380 inserts across sizes. The press kit adds a 60W iron and a stated insertion height of 210mm.

Match the Hole to the Insert and the Tip

Start with the insert. The M3-only kit pairs 361 M3 brass inserts with heat set tips, and its 45-degree knurling adds torque resistance and tensile strength. The mixed kits span M2 to M5 or M2 to M8. The lead-free brass kit has 45-degree spiral knurling and a built-in guide, so no countersinking is needed. Then pick the tip: the mixed kits include 5 heat set tips from M2 to M5 or quick-change tips from M2 to M8, and the press kit adds a 60W iron with a 180-500°C range. The tip heats the insert.

Heat by Material

Heat is the remaining input, and one kit states it per plastic: PLA 180-220°C, PETG 210-230°C, ABS 230-250°C and Nylon/PC 280-350°C. The two 60W irons cover 180-500°C, so the dial must sit inside the range for the plastic in use. The M3-only and lead-free brass inserts withstand above 300°C/572°F. Match the iron setting to the plastic, not to the insert.

Gear for M3 Heat Set Inserts

The hole follows the insert, so the gear below covers the inserts, the tips that seat them and the irons that heat them.

FAQ: lasers and CNC

What hole size does an M3 heat set insert need?

The listings state no single hole diameter for M3 inserts. Match the hole to the M3 insert and the M3 seating tip in the kit. The M3-only kit carries 361 M3 inserts, while the mixed kits span M2 to M8.

What temperature should I use for PLA inserts?

One kit states PLA at 180-220°C, with PETG at 210-230°C, ABS at 230-250°C and Nylon/PC at 280-350°C. Set the iron inside the range for the plastic in use.

Do I need a press or will a soldering iron work?

Both work. The press kit seats inserts in parts up to 210mm tall with a 60W iron, while the iron kit pairs a 60W digital iron with 380 inserts and quick-change M2-M8 tips. A press suits repeated inserts in taller parts, and a hand iron suits small jobs.

Which plastics work with heat set inserts?

The listings name PLA, PETG, ABS, PPS, PP, PC, PA and TPU across the four kits. The lead-free brass kit lists PLA, PETG, ABS and TPU, while the iron kit adds PC and PA. Match the iron temperature to the plastic in use.

How many M3 inserts come in these kits?

The M3-only kit carries 361 M3 inserts. The mixed kits carry 320 inserts in M2 to M5 and 380 inserts in M2 to M8, with the M3 share inside each mixed count. Pick the M3-only kit for M3-only work, and a mixed kit when other sizes are in use.

Related: the 3D printers hub, best 3D printer accessory kit and best FDM 3D printing filament.

More buying guides

3D Printers ·

M4 Heat Set Insert Hole Size Chart

The M4 heat set insert hole size is 5mm, matched to the outside diameter of the M4 insert, with a full size chart and…

CNC Tooling ·

M5 Heat Set Insert Hole Size Chart

The hole for an M5 heat set insert matches the insert, so this guide shows the temperatures, press times and kits that seat M5…

CNC Tooling ·

How to Use Heat Set Inserts

How to use heat set inserts: pick the right size, heat the tip, press the insert straight into the printed hole, and let the…