How to Use a 3D Printer Pen: Load, Draw and Finish
How to use a 3d printer pen: load filament, draw flat shapes on a mat, build layers, join parts and finish edges with steady speed control.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
MYNT3D Pro 3D Pen + 10 Color PLA + DesignPad Mat9.7/10View on Amazon - 2
MYNT3D Super 3D Pen, 1.75mm ABS and PLA Compatible9.6/10View on Amazon
A flat sketch that stays on paper, a traced pattern that needs raised edges, or a geometric shape that needs walls and joins all point to the same hand tool, and how to use a 3d printer pen comes down to loading filament, setting flow, drawing flat shapes on a mat, building layers and finishing edges. The steps below walk through that workflow in order, from filament choice to storage.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
A printing pen draws by hand, so line quality depends on steady movement and flow control.

MYNT3D Pro 3D Pen + 10 Color PLA + DesignPad Mat
A Pro 3D Pen kit with stepless speed control, temperature adjustability, PLA refills in 10 colors and drawing mats for tracing and geometric shapes.
Pros
- Stepless speed control for flow regulation while drawing
- Discrete temperature adjustability for material options
- DesignPad channels help form geometric shapes
- FreePad surface helps trace patterns and drawings
Cons
- Kit filament is PLA refills in 10 colors
- Discrete temperature steps limit fine heat changes
- FreePad tracing needs flat patterns to start
- DesignPad channels suit geometric shapes over free curves

MYNT3D Super 3D Pen, 1.75mm ABS and PLA Compatible
A Super 3D Pen for 1.75mm ABS and PLA filament with a stepless speed slider, sealed nozzle and A/C adapter kit for drawing raised work.
Pros
- Stated for 1.75mm ABS and PLA filament
- Stepless speed slider regulates flow while drawing
- Ultrasonic sealed nozzle design as stated
- Kit includes A/C adapter and PLA filament
Cons
- Kit includes 3 colors of PLA filament
- No drawing mat is included in the kit
- A/C adapter power ties drawing to an outlet
- No temperature adjustability is stated for this pen
Step 1: Choose filament and a drawing surface
Start with the material you plan to draw. The MYNT3D Super 3D Pen (on Amazon) is stated as compatible with 1.75mm ABS and PLA filament. The MYNT3D Pro 3D Pen kit centers on PLA filament refills in 10 colors. Keep filament type matched to the pen in hand, and read our filament types guide when you compare PLA and ABS for a project.
Draw on a surface that holds the line while it cools. The Pro kit includes a DesignPad mat with channels for geometric shapes and a FreePad surface for tracing patterns and drawings.
Step 2: Load filament and set flow
Plug in the pen with its power adapter and load filament through the pen inlet as the maker directs. The Super kit includes an A/C adapter with the pen and filament. Feed filament until melted material reaches the nozzle, then set flow with the speed control before you draw a full shape.
The Super pen uses a stepless speed slider to regulate flow while drawing. The Pro pen uses stepless speed control with discrete temperature adjustability for material options. Start with slow flow for outlines and raise flow only when a line needs more material.
Step 3: Draw flat lines and shapes
Draw outlines and flat panels on the mat. Move at a steady pace so the line stays even, and pause at corners to let material join. The DesignPad channels help form geometric shapes, and the FreePad surface helps trace patterns with adhesion for the base layer.
Keep the nozzle close to the surface for flat work and lift the pen cleanly at the end of each line. Flat pieces form walls, bases and details that later steps join into raised work. For project starting points, see our 3D pen ideas for beginners.
Step 4: Build layers and join parts
Build height by drawing new lines over cooled lines. Add material in passes rather than in a heavy pass, and let each pass cool before the next pass touches it. Join flat parts by drawing fresh filament along the seam where parts meet.
Work around the shape as you build so walls rise evenly. Geometric channels on the DesignPad help keep straight edges aligned while you add layers.
Step 5: Change colors and unload filament
Change color by unloading the current filament and loading the next color as the maker directs. The Pro kit PLA refills come in blue, green, red, yellow, orange, pink, black, tan, brown and gold. The Super kit includes 3 colors of PLA plastic filament. Purge the prior color until the new color flows cleanly before you draw visible lines.
Unload filament when you pause for storage or switch material type. Our filament change guide and filament removal guide cover printer filament handling.
Step 6: Finish, store and care for the nozzle
Finish edges by trimming stray strands and smoothing joins with fresh filament where a seam needs material. Let finished work cool fully before you handle it. Store filament sealed and dry, and store the pen with the nozzle cool and clear of loose strands.
Nozzle design differs across the gear below. The Super pen has an ultrasonic sealed nozzle. The Pro pen has a replaceable sealed nozzle design. Follow maker directions for nozzle care, and keep the speed setting matched to the filament in the pen, adjusting temperature only on the Pro pen.
Common mistakes to avoid
- Drawing full shapes before flow is set on a practice line.
- Lifting flat pieces before lines cool and join.
- Building height in a heavy pass instead of layered passes.
- Changing color without purging the prior color from the nozzle.
- Drawing without a mat for traced patterns and geometric shapes.
How to use a 3d printer pen: the short version
- Choose filament and a drawing mat for the project.
- Load filament and set flow with the speed control.
- Draw flat outlines and panels on the mat.
- Build layers and join parts with fresh filament.
- Change colors with a clean purge between colors.
- Finish edges, cool the work and store the pen.
Steady flow and layered passes turn flat drawings into raised work without rushing the cooling step.
Gear for these steps
The pens below handle the loading and drawing steps above, and the Pro kit adds the mat work for traced and geometric shapes.
FAQ: lasers and CNC
What filament does a 3D printing pen use?
The MYNT3D Super 3D Pen is stated as compatible with 1.75mm ABS and PLA filament. The MYNT3D Pro 3D Pen kit includes PLA filament refills in 10 colors for drawing and tracing work.
How do you draw straight shapes with a pen?
Draw flat outlines on a mat and build in passes. The Pro kit DesignPad has channels for geometric shapes, and the FreePad surface helps trace patterns before you build raised layers.
How do you change colors in a printing pen?
Unload the current filament, load the next color and purge until the new color flows cleanly. The Pro kit includes PLA refills in 10 colors, and the Super kit includes 3 colors of PLA filament.
What helps keep a pen nozzle clear?
The Super pen’s ultrasonic sealed nozzle is stated as nearly clog-proof, and the Pro pen’s replaceable sealed nozzle design is stated for clog-free operation.
What warranty do these pens carry?
The Super pen carries a 1 year limited warranty with the kit. The Pro pen kit also carries a 1 year limited warranty as stated.
Related: the 3D printer hub, 3D printing pen for beginners and 3D pen ideas for beginners. Also see our guide to filament included with printers.




