3D Pen Ideas for Beginners: Simple Projects to Start With
Simple 3D pen project ideas for beginners, with the filament colors and lengths each project needs.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Kretrum 40 Colors PLA 3D Pen Filament Refills9.7/10View on Amazon - 2
SCRIB3D Pen Filament Refills, 20 Colors, 320 Feet9.6/10View on Amazon - 3
MIKA3D 32 Colors 3D Pen PLA Filament Refills9.6/10View on Amazon - 4
32 Colors 3D Doodler Pen Refills Packs9.5/10View on Amazon
A blank desk, a shelf that needs a small gift, or a phone that keeps sliding off the table: a 3D pen turns those small wants into something you can draw in the air. These 3d pen ideas start with flat shapes you can trace, then build up to standing figures, phone stands and simple jewelry. The refill packs below show what each kind of project needs.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Kretrum 40 Colors PLA 3D Pen Filament Refills
A 40-color PLA refill pack with 3 meters per color and 120 meters in total, in 1.75 mm filament for most 3D pens.
Pros
- 40 colors, with 25 popular, 3 transparent, 3 fluorescent, 6 sparkly and 3 glow in dark colors
- 3 meters per color, 120 meters in total
- 1.75 mm PLA fits most 3D pens and most 3D printers
- 90 days warranty time stated
Cons
- Not for the 3Doodler Start pen
- Only 3 glow in dark colors in a 40-color pack
- 3 meters per color, so a large piece can use up a color
- Only 3 transparent colors in the pack

SCRIB3D Pen Filament Refills, 20 Colors, 320 Feet
A 20-color PLA refill bundle in 1.75 mm filament, with a print temperature range of 160 to 210 degrees Celsius.
Pros
- 20 colors for 3D drawing and 3D art projects
- 1.75 mm filament works with most 3D pens
- Print temperature range of 160 to 210 degrees Celsius stated
- 1 Year Warranty Against Manufacturer Defects stated
Cons
- Not compatible with 3Doodler Create+ pens
- 20 colors, fewer than the 32 and 40 color packs here
- Fits pens that use 1.75 mm filament only
- Vacuum packing ends once a color is opened

MIKA3D 32 Colors 3D Pen PLA Filament Refills
A 32-color PLA refill pack with 10 feet per color and 320 feet in total, with 4 metallic, 10 clear and 18 solid colors.
Pros
- 32 colors: 4 metallic, 10 clear and 18 solid
- 10 feet per color, 320 feet in total
- 1.75 mm PLA fits most 3D pens and 3D printers
- 4 finger caps included in the pack
Cons
- Not for 3Doodler pens
- No warranty term is stated
- 10 feet per color limits long single-color work
- Packed in one vacuum bag, so all colors open together

32 Colors 3D Doodler Pen Refills Packs
A 32-color PCL refill pack made only for the 3Doodler Start+ pen, with 5 strands of 15.2 cm per color and 160 strands in total.
Pros
- 32 colors: 21 bright solid, 6 glow and 5 light colors
- 6 glow colors glow in the dark after absorbing light
- PCL filament with low printing temperature
- Resealable openings keep the remaining refills dry
Cons
- Fits only the 3Doodler Start+ pen
- Short 15.2 cm strands, so a large piece needs many strands
- No warranty term is stated
- Not for any other brand of 3D pen
Easy 3d pen ideas that start flat
Start with flat shapes. Trace a shape on paper, draw over the lines with the pen, then peel the piece off when it cools. Coasters, bookmarks, gift tags and simple ornaments all start this way, and plain colors are enough for the first few tries. Once the lines stay even, add extra colors for borders, letters or small details.
Build up to standing figures
For standing figures, phone stands and small models, build from flat pieces joined upright: build the base first and let it cool before adding walls or legs. Draw the parts flat, then join them with short lines of filament along the edges. Keep the first standing pieces small, so a wobble costs little filament and little time.
Match filament to your pen
Filament fit decides whether a pack works at all, so check the pen before the colors. The MIKA3D, SCRIB3D and Kretrum PLA packs here are all 1.75 mm, the size each maker states fits most 3D pens. The Kretrum PCL pack is different: it is 2.5 mm PCL made only for the 3Doodler Start+ pen. The MIKA3D pack states that it does not fit 3Doodler pens, the Kretrum PLA pack states that it does not fit the 3Doodler Start pen, and the SCRIB3D pack states that it does not fit 3Doodler Create+ pens.
Filament packs for these projects
The projects above need filament that fits the pen, and the four packs below cover 1.75 mm PLA for most pens and 2.5 mm PCL for the 3Doodler Start+.
FAQ: lasers and CNC
What is the easiest 3D pen project for a beginner?
A flat shape traced on paper is the easiest start: draw over the lines, let the piece cool, then peel it off. Coasters, bookmarks and gift tags all work this way. Add extra colors after the lines stay even.
Which filament fits my 3D pen?
Check the diameter the pen takes. The three PLA packs here are 1.75 mm, the size their makers state fits most 3D pens. The 3Doodler Start+ pen takes 2.5 mm PCL filament instead, and the Kretrum PCL pack here is made only for that pen.
How much filament does a small project use?
It depends on the size of the piece. The MIKA3D pack gives 10 feet per color, the Kretrum PLA pack gives 3 meters per color, and the Kretrum PCL pack gives strands of 15.2 cm.
Can I use PLA filament in any 3D pen?
No. The three PLA packs here are 1.75 mm, but the 3Doodler Start+ pen takes 2.5 mm PCL instead. The MIKA3D pack does not fit 3Doodler pens, the Kretrum PLA pack does not fit the 3Doodler Start pen, and the SCRIB3D pack does not fit 3Doodler Create+ pens.
Do these filament packs come with a warranty?
The SCRIB3D pack states a 1 year warranty against manufacturer defects, and the Kretrum PLA pack states 90 days. The MIKA3D and Kretrum PCL packs list no warranty term.
Related: the craft machines hub, types of PLA filament, how to store 3D filament, best FDM 3D printing filament and best multicolor PLA filament for figurines.




