How Much Is a 3D Printing Pen: What Changes the Cost
How much is a 3d printing pen depends on the bundle: pen features, included filament, mats and stencils. Here is what changes the cost and what to budget for refills.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
SCRIB3D P1 3D Printing Pen with Display9.6/10View on Amazon - 2
MYNT3D Professional Printing 3D Pen with OLED Display9.5/10View on Amazon - 3
SCRIB3D P1 3D Printing Pen with 3 Starter Colors and PLA9.5/10View on Amazon
You want to draw a small figure in the air, trace a stencil into a keepsake, or add raised detail to a model you already made. How much is a 3d printing pen depends on what is in the box: the pen on its own, a bundle with filament and a mat, or a low temperature pen. This guide walks through what changes the cost, what the refills add, and which extras are worth paying for, so you can match the spend to the project.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Prices move often and vary by seller, so this guide does not pin the answer to a single figure. Instead it shows what you get at each level: how much filament is included, which controls the pen has, and which extras come in the box. Check the current price on the product page before you buy.
Step 1: Decide what you want to make
The project decides the pen. Flat traced pieces, small standing figures and repairs to printed parts all ask for the same basic tool: a heated pen that feeds filament at a steady rate. If you only want to try the idea, a basic pen with a small amount of starter filament is enough. If you plan gifts, models or classroom projects, look at bundles that add a mat, a stencil book and more filament, because those extras can be useful after the first sitting.
Our 3D pen ideas for beginners guide shows simple projects to start with, and how to use a 3D printer pen covers loading, drawing and finishing. Read those before you spend on a larger bundle.
Step 2: Compare pen-only prices with bundle prices
A pen on its own is the simplest entry point. Bundles add filament, a drawing mat, stencils and sometimes a case. The SCRIB3D Advanced bundle, for example, includes the pen plus 348 feet of 1.75mm PLA filament in total, with 20 colors in the extra refill pack, a stencil book and a project guide. The MYNT3D Super kit pairs its pen with 10 color PLA filament refills and a mat kit. When you compare prices, compare the full contents, not just the pen.
Features also move the price. The SCRIB3D Advanced pen has variable speed control and a large LCD screen. The MYNT3D Super pen has stepless speed control, temperature adjustability for ABS or PLA, and a replaceable sealed nozzle. Speed control matters because it sets how fast filament leaves the tip while you draw. A display shows the settings in use while you draw.
Step 3: Budget for filament refills
Filament is the running cost, and it is sold by length and color count. Refill packs here run from 150 feet of 1.75mm PLA across 15 colors to 240 feet across 15 colors at 16 feet per color, and up to 360 feet across 36 colors. A larger pack holds more filament and keeps you drawing without a second order mid-project.
Match the diameter to your pen before you buy. Diameter is model specific: the 1.75mm refills here are stated as compatible with SCRIB3D and MYNT3D pens, while the 2.5mm PCL refill set for the 3Doodler Start+ includes 160 pre-cut strands in 32 colors, each strand 15cm long. A 1.75mm refill pack also states it does not fit 3.0mm 3Doodler pens. A refill that does not fit is money wasted, so check the diameter on your pen first.
Temperature is part of the match. The YEETIN 1.75mm PLA refills (on Amazon) are made for a 320F to 428F range, while the low temperature PCL strands begin at a stated operating temperature of 158°F (70°C). If a pen is not stated as compatible with a filament, or cannot work in the temperature range that filament needs, feeding may not work as intended.
Step 4: Add the extras you will actually use
Extras are where bundle prices separate. A silicone drawing mat gives you a surface you can trace on and peel finished pieces from. Stencil books add ready-made patterns: one set includes a 42-page book with 65 reusable templates, and another kit includes a stencil book with 11 templates. Finger caps and heat-resistant finger sleeves are included in some kits. A storage case with a grooved base and mesh pocket keeps the pen, refills and cable together; one case for the 3Doodler Start+ comes with 72 pen refills included.
Buy extras for the work you plan. If you trace designs, a mat and stencils earn their place. If you draw freehand, spend the money on filament colors instead. Our 3D printing pen for beginners guide helps you choose a starting setup, and the are 3D pens worth it guide weighs the pen against a full printer.
Step 5: Check warranty and running costs
A warranty is part of the price. The MYNT3D Super kit states a 1 year limited warranty, and the YEETIN refill pack states a 1 year manufacturer warranty. Where no term is stated, treat support as Not stated and weigh that in the price.
Running costs stay simple: filament refills, the odd replacement nozzle where the pen allows it, and storage for finished pieces. There are no build plates, resins or wash stations to budget for. That keeps running costs to filament, extras and storage. Browse the 3D printers hub when you are ready for that step.
Common mistakes to avoid
- Comparing a pen-only price with a bundle price without reading the contents.
- Buying 1.75mm refills for a pen that takes 2.5mm or 3.0mm strands.
- Skipping the mat and stencils, then struggling to trace clean shapes.
- Paying for many filament colors before you know which projects you enjoy.
- Ignoring the stated warranty term when two pens look alike.
How much is a 3d printing pen: the short version
- Start with the project, then pick the pen features it needs.
- Compare bundles by contents: filament length, mat, stencils and case.
- Budget for refills by diameter, length and color count.
- Add extras only for the work you plan to do.
- Check the stated warranty before you buy.
Everything after that is practice: draw slowly, let pieces cool, and add colors as your projects grow.
FAQ: lasers and CNC
How much does a 3D printing pen cost with filament included?
It depends on the bundle. Kits pair the pen with starter filament, a mat and stencils. The SCRIB3D Advanced bundle includes 348 feet of filament, while the MYNT3D Super kit includes 10 color refills and a mat kit. Compare contents, then check the current price.
How much are 3D pen filament refills?
Refills are priced by length and colors. Packs here include 150 feet across 15 colors, 240 feet across 15 colors, and 360 feet across 36 colors, all in 1.75mm PLA. Low temperature PCL refills come as pre-cut 15cm strands.
Is a low temperature 3D pen cheaper to run?
The low temperature refill pack here uses 2.5mm PCL strands, with a stated operating temperature of 158°F (70°C), sold as 160 strands in 32 colors. The running cost is the refill pack, as with the 1.75mm packs above.
What else do I need to budget for?
A silicone mat for tracing, a stencil book with templates, finger caps for warm filament, and a case for storage. One stencil set includes 65 reusable templates, and one case includes 72 refills. Buy these only if your projects need them.
Does a 3D printing pen come with a warranty?
Some do. The MYNT3D Super kit states a 1 year limited warranty. Where no term is stated, treat the warranty as Not stated and factor that into what you are willing to pay.
Related: the 3D printers hub, 3D printing pen for beginners and how to use a 3D printer pen. Also see our are 3D pens worth it guide.




