Carbon Fiber Sheet Price: What Drives the Cost
Carbon fiber sheet price depends on thickness, size, weave and finish, so compare the two 3K sheets here before you order.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ayktiuf Carbon Fiber Sheet 180x230x1mm,Twill Weave9.7/10View on Amazon - 2
cncarbonfiber 2.0mm 200x300mm Carbon Fiber Sheet9.6/10View on Amazon
You want a sheet of carbon fiber for a drone frame, a model part or a small batch of cut pieces, and the first question is what the sheet will cost. Carbon fiber sheet price moves with thickness, size, weave and finish, not with a single flat rate, so this guide compares the two 3K sheets below on those four points. The short answer: match the sheet to the part first, then compare sheets of the same thickness and size.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
This guide gives no dollar figures: the sheets below are compared by thickness, size, weave and finish, which are the points that move the price. Compare sheets of the same thickness and size before you order.

ayktiuf Carbon Fiber Sheet 180x230x1mm,Twill Weave
A 180 by 230 mm carbon fiber sheet, 1 mm thick, in 3K twill weave with a glossy finish and protective film on both sides.
Pros
- Six thicknesses from 0.5 to 5 mm and two weave styles
- Vacuum-infused build for even fiber distribution
- Protective film on both sides against scratches
- Glossy 3K twill weave with a clean surface
Cons
- No warranty term is stated
- Only one sheet in the pack
- The sheet measures 180 by 230 mm, smaller than the 200 by 300 mm sheet
- At 1 mm thick, the sheet suits light parts rather than thick panels

cncarbonfiber 2.0mm 200x300mm Carbon Fiber Sheet
A 200 by 300 mm carbon fiber sheet, 2.0 mm thick, in 3K twill weave with a matte finish.
Pros
- Pure carbon fiber with no fillers or glass fiber layers
- Density of 1.6 to 1.7 g/cm³ is stated
- Sizes up to 400 by 500 mm are available
- 3K twill matte finish with a clear texture
Cons
- No warranty term is stated
- Only one sheet in the pack
- The matte finish suits plain parts, not a glossy show surface
- Thermoforming is not among the uses stated for this sheet
How carbon fiber sheet price is set
Thickness, size, weave and finish set the price of a sheet. A thicker sheet uses more fiber, and a larger sheet covers more material, so both push the price up. The two sheets below show the range: thicknesses from 0.5 to 5 mm, sizes from 180 by 230 mm to 400 by 500 mm, twill and plain weaves, and matte and glossy finishes. Start with the part you want to make, then pick the thickness and size it needs.
Thickness: thin sheets and thick sheets
Both sheets here offer thicknesses from 0.5 to 5 mm. The ayktiuf sheet (on Amazon) lists six thicknesses: 0.5, 1, 2, 3, 4 and 5 mm, and the sheet in this guide is 1 mm thick. The cncarbonfiber sheet lists 0.5 to 5 mm as well, and the sheet in this guide is 2.0 mm thick. Thin sheets suit light parts such as RC and model pieces, while thicker sheets suit parts that need more rigidity. Match the thickness to the part, and order the thickness the part needs.
Size: small sheets and large sheets
The ayktiuf sheet measures 180 by 230 mm, and the cncarbonfiber sheet measures 200 by 300 mm. The cncarbonfiber sheet also comes in 300 by 400 mm and 400 by 500 mm sizes. A larger sheet covers a bigger part, or more small parts from one sheet, so it suits work where one piece must come from a single sheet. Measure the part first, then order the size that covers it with room for the cut.
Weave and finish: twill, plain, matte and glossy
Both sheets are 3K carbon fiber in twill weave. The ayktiuf sheet also comes in plain weave; the sheet in this guide is twill, with a glossy finish and a protective film on both sides. The cncarbonfiber sheet has a matte finish with a clear texture. Weave and finish change how the sheet looks and how it feels, while the fiber underneath stays 3K carbon fiber. Pick the finish that suits the part: glossy for show pieces, matte for plain parts.
The sheets: two 3K carbon fiber sheets
Measure the part first, then match the sheet: the two sheets below cover sizes from 180 by 230 mm to 400 by 500 mm in 3K twill, one glossy with a protective film and one matte.
FAQ: lasers and CNC
How much does a carbon fiber sheet cost?
This guide gives no dollar figures. Price moves with thickness, size, weave and finish, so compare sheets of the same thickness and size before you order.
What thickness of carbon fiber sheet do I need?
Both sheets here come in thicknesses from 0.5 to 5 mm. The ayktiuf sheet in this guide is 1 mm thick and the cncarbonfiber sheet is 2.0 mm thick. Match the thickness to the part: thin sheets suit light RC and model parts, and thicker sheets suit parts that need more rigidity.
What is 3K carbon fiber?
Both sheets here are 3K carbon fiber in twill weave, and the ayktiuf sheet also comes in plain weave. The twill weave is what the two sheets share, so compare them on thickness, size and finish instead.
Can I cut carbon fiber sheet with a CNC?
Both sheets list CNC engraving, cutting and milling among their uses, and the ayktiuf sheet also lists drilling and thermoforming. Cut in a ventilated space and follow the fire safety steps for your machine.
What sizes do carbon fiber sheets come in?
The sheets here measure 180 by 230 mm and 200 by 300 mm. The cncarbonfiber sheet also comes in 300 by 400 mm and 400 by 500 mm sizes. Measure the part first, then order the size that covers it.
Related: the engraving materials hub and laser engraver hub. Also see our how to price laser engraving work. Also see our how much you can make with a laser engraver.




