Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Can You Laser Engrave PU Leather? Materials Guide

PU leather can be laser engraved when the sheet is genuine PU, the workspace is ventilated, and the settings suit thin faux leather.

Can You Laser Engrave PU Leather? Materials Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1iFForce 12.6”X10.6“ Laser Engraving PU LeatheriFForce 12.6”X10.6“ Laser Engraving PU Leather9.7/10View on Amazon
  2. 218 Pieces Faux Leather Sheets 8×12 inches Rainbow18 Pieces Faux Leather Sheets 8×12 inches Rainbow9.6/10View on Amazon
  3. 332 Pieces 8×12 inches Colored Faux PU Leather32 Pieces 8×12 inches Colored Faux PU Leather9.6/10View on Amazon
  4. 4TORRAMI Soft Faux Leather FabricTORRAMI Soft Faux Leather Fabric9.6/10View on Amazon

Can you laser engrave PU leather? Yes, genuine PU leather can be laser engraved, and the sheets suit patches, labels and small craft pieces. The sheet must be genuine PU, not PVC-based faux leather, because PVC and vinyl must never be lasered and can damage the machine. With real PU and a ventilated workspace, engrave a spare corner first to check the mark before running the full design.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

iFForce 12.6”X10.6“ Laser Engraving PU Leather

iFForce 12.6”X10.6“ Laser Engraving PU Leather

iFForce9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Iron-on PU leather patches in 6 colors, with 6 large sheets sized 12.6 x 10.6 inches for hats, garments and crafts.

Pros

  • Maker states laser engraving use, with the design sized to fit the full border
  • 6 large sheets in 6 colors, sized 12.6 x 10.6 inches
  • Iron-on backing with strong adhesion after heat transfer, or stitch and sew on
  • A stated 30 days warranty

Cons

  • Heat pressing from the front risks blackening the leather
  • Patches must cool before moving, which slows batch work
  • 12.6 x 10.6 inch sheets suit patches, not large upholstery panels
  • 30 days is a short warranty term
18 Pieces Faux Leather Sheets 8×12 inches Rainbow

18 Pieces Faux Leather Sheets 8×12 inches Rainbow

Nitelemn9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

18 rainbow PU leather sheets, 8.2 x 11.8 inches and 0.7 mm thick, with a cotton back for bows, earrings and crafts.

Pros

  • 18 sheets in 18 colors, with 1 sheet per color
  • Waterproof and durable, with a soft, smooth leather side
  • Cotton back finish, sewn by hand or machine
  • 8.2 x 11.8 inch sheets suit bows, earrings and small crafts

Cons

  • No warranty term is stated
  • 8.2 x 11.8 inch sheets are small for large projects
  • 0.7 mm thickness suits light crafts, not heavy upholstery
  • Rainbow colors only, so a maker who needs plain neutrals must look elsewhere
32 Pieces 8×12 inches Colored Faux PU Leather

32 Pieces 8×12 inches Colored Faux PU Leather

fuceury9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

32 colored faux PU leather sheets, 8 x 12 inches and 0.7 mm thick, with a cotton fabric back for bows, earrings and crafts.

Pros

  • 32 sheets in 32 colors, with 1 sheet in each color
  • The maker describes the texture as lambskin-like, soft and comfortable
  • High quality PU with cotton fabric on the back
  • Suits bows, earrings, keychains, jewelry making and sewing crafts

Cons

  • No warranty term is stated
  • 8 x 12 inch sheets are small for large projects
  • 0.7 mm thickness suits light crafts, not heavy upholstery
  • Mixed colors only; no plain-color pack is listed
TORRAMI Soft Faux Leather Fabric

TORRAMI Soft Faux Leather Fabric

TORRAMI9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A black pebbled PU leather sheet, 1 yard at 54 x 36 inches and 0.95 mm thick, with a fuzzy fabric backing for upholstery and handbags.

Pros

  • 54 x 36 inch yard cut suits large panels and upholstery
  • Pebbled grain with a soft hand and fuzzy fabric backing
  • Cut edges resist fraying, and the sheet cuts easily with scissors
  • Suits upholstery accents, handbags, wallets, cosmetic bags and phone covers

Cons

  • Black only; no other color is listed
  • 54 x 36 inch sheet needs room to lay out and cut
  • 0.95 mm thickness suits upholstery and bags more than fine earrings
  • A yard cut leaves offcuts on small projects

Can you laser engrave PU leather safely?

Safe engraving starts with the material. Check that the sheet is PU, and skip any sheet that lists PVC or vinyl. PU leather is a polyurethane surface on a fabric back, and the sheets here state PU with a cotton back, a fuzzy fabric backing or an iron-on backing. Ventilate the workspace and never leave a running job unattended. Eyewear protects only when the listing states an optical density and a wavelength range that matches the laser.

How to engrave PU leather

Size the design to fit the sheet, place the sheet flat on the laser bed, and focus the laser on the surface. Engrave a spare corner to check the mark before running the full design, and keep the power low enough to mark without cutting through. When the mark looks right, run the design, then brush away dust and loose fibers with a soft cloth.

What to look for in a PU leather sheet

Sheet size decides what fits in a run. The sheets here range from 8 x 12 inches for small crafts to 54 x 36 inches for upholstery panels, and the patch sheets measure 12.6 x 10.6 inches. Thickness is stated as 0.7 mm on the Nitelemn and fuceury craft sheets and 0.95 mm on the TORRAMI yard (on Amazon) cut, and is Not stated for the iFForce patch sheets (on Amazon). Rainbow and mixed packs cover many colors in each order, while the yard cut comes in black. For more on leather choices, see can you laser engrave leather and veg tan vs bonded leather for laser engraving.

PU leather sheets for engraving

The sheets below supply the material for that engraving work, sized for patches, small crafts and large panels.

FAQ: lasers and CNC

Can you laser engrave PU leather with a diode laser?

A diode laser can mark genuine PU leather, but the result depends on the sheet coating and backing. Confirm the sheet is PU, ventilate the workspace and engrave a spare corner first.

Does laser engraving PU leather make fumes?

Yes, engraving PU leather makes smoke, so ventilate the workspace and move fumes outdoors. Never engrave PVC, vinyl or PVC-based faux leather, which must never be lasered and can damage the machine.

Can you laser engrave PU leather patches for hats?

Yes, iron-on PU leather patches suit hats, caps and garments. The iFForce sheets are made for this use, with a photo sized to fit the full border and a fabric cloth over the patch while pressing. The maker lists 285°F/140°C for 30s, and warns that heating from the front risks blackening the leather.

What thickness of PU leather engraves well?

Thickness is stated as 0.7 mm on the Nitelemn and fuceury craft sheets and 0.95 mm on the TORRAMI yard cut, and is Not stated for the iFForce patch sheets. Thinner sheets suit bows, earrings and small craft pieces, while the thicker yard cut suits upholstery and handbags.

Is PU leather the same as real leather for engraving?

No, PU leather is faux leather with a polyurethane surface on a fabric back, while real leather is animal hide. Always confirm the sheet is PU and not PVC before engraving.

Related: the engraving materials hub, can you laser engrave leather.

More buying guides